Panasonic ET-EMS650 Bedienungsanleitung
ENGLISH
FRANÇAIS
日本語
Commercial Use
Model No.
ET-EMW200 / ET-EMW300 / ET-EMW400 /
ET-EMW500 / ET-EMS650 / ET-EMT750 /
ET-EMT850 / ET-EMU100
DPQX1425ZG/X1
Zoom Lens
Operating Instructions
Thank you for purchasing this Panasonic product.
■To ensure correct use of this lens, please read the operating instructions supplied
with the lens and the projector carefully.
■Before using this product, be sure to read “Read this rst!” (Page 3 to 5).
■Please save this manual for future use.
ET-EMW200 ET-EMW300 ET-EMW400
ET-EMS650
ET-EMT750 ET-EMT850
ET-EMU100
ET-EMW500
2-ENGLISH
Read this rst! ......................................................................................3
Before Use.............................................................................................6
Preparation............................................................................................7
Before replacing the projection lens........................................................7
Attaching the Lens / Detaching the Lens.................................................7
Peripheral focus adjustment function ......................................................8
Lens calibration .......................................................................................8
Projection relationships.......................................................................9
Lens shift ranges................................................................................10
Specications .....................................................................................12
Dimensions .........................................................................................12
Projected image size and Projection distance.......Appendix / Annexe / 付録 1
The "Appendix" can be found after the Japanese language section ( 日本語 ).
█ Contents
ENGLISH-3
Read this rst! Always follow these precautions
WARNING:
Do not look at or place your skin into the light emitted from the lens while the
projector is being used.
Doing so can cause burns or loss of sight.
zStrong light is emitted from the projector’s lens. Do not look at or place your hands
directly into this light.
zTurn off the power when moving away from the projection lens or projector.
Do not project an image with the lens cover attached.
zDoing so can cause re.
Do not allow children to reach the lens xing screw.
Accidentally swallowing them can cause physical harm.
zIf swallowed, seek medical advice immediately.
CAUTION:
Before replacing the projection lens, be sure to turn off the power and
disconnect the power plug from the wall outlet.
zUnexpected projection of light may cause injury to eyes.
zReplacing the projection lens without removing the power plug may result in electric
shock.
Do not stand in front of the lens while the projector is being used.
Doing so can cause damage and burns to clothing.
zStrong light is emitted from the projector’s lens.
Do not place objects in front of the lens while the projector is being used.
Doing so can cause re, damage to the object, or malfunction of the lens and
projector.
zStrong light is emitted from the projector’s lens.
Do not open the desiccant bag. Do not eat the contents.
Inadvertently ingesting desiccant could be harmful.
zIf the desiccant gets into your eyes or mouth, immediately rinse with plenty of water
and seek medical attention.
zKeep desiccant out of the reach of children.
4-ENGLISH
rHazard distance (IEC/EN 62471-5:2015)
The distance from the projection lens surface, at which the emission reaches the Accessible
Emission Limit (AEL) of risk group 2, is known as the hazard distance (HD) or safety distance. The
area where the emission exceeds the Accessible Emission Limit of risk group 2 is called the hazard
zone (HZ).
Within the hazard zone, never look into the light projected from the projector. The eyes may be
damaged by direct irradiation even if you look at the light just for a moment. If you are outside the
hazard zone, it is considered to be safe in all circumstances except deliberately staring into the light
projected from the projector.
HD
D3
D4
HD
D1
D2
HZ
HZ
rRisk group
The combination of the projector and the projection lens is categorized as risk group 2 when the
hazard distance is 1 m (39-3/8") or less. It is categorized as risk group 3 when the hazard distance
exceeds 1 m (39-3/8"), and it will be for professional use instead of consumer use.
In the case of risk group 3, there is a possibility of damaging the eyes by direct irradiation when
looking into the projection light from inside the hazard zone even for a moment.
In the case of risk group 2, safe use without damaging the eyes is possible in all circumstances
except deliberately staring into the light projected from the projector.
The combination of projector and projection lens classified as risk group 3 with a hazard distance
greater than 1 m (39-3/8") is as follows.
Projector model Projector lens
model Use condition Risk group
PT-MZ20K
PT-MZ17K
ET-EMT750
ET-EMT850 ―Risk group 3
PT-MZ14K*1
PT-MZ11K*1 ET-EMT850 ―Risk group 3
PT-MZ16K ET-EMT750*2 When the throw ratio is 2.9:1 or less Risk group 2
When the throw ratio exceeds 2.9:1 Risk group 3
ET-EMT850 ―Risk group 3
PT-MZ13K ET-EMT750*2 When the throw ratio is 3.4:1 or less Risk group 2
When the throw ratio exceeds 3.4:1 Risk group 3
ET-EMT850 ―Risk group 3
PT-MZ10K*1 ET-EMT850*2 When the throw ratio is 4.6:1 or less Risk group 2
When the throw ratio exceeds 4.6:1 Risk group 3
*1 When using the ET-EMT750 attached to the PT-MZ14K / PT-MZ11K / PT-MZ10K, the risk group is 2 because
the hazard distance is less than 1 m (39-3/8").
*2 The risk group differs depending on the throw ratio in the actual usage state.
Read this rst! (continued)
ENGLISH-5
Furthermore, each dimension to indicate the hazard area (Hz) for a combination with a projection
lens that has a hazard distance exceeding 1 m (39-3/8") is as follows.
(Unit: m)
Projector model Projector lens
model HD*1 D1*2 D2*2 D3*2 D4*2
PT-MZ20K ET-EMT750 1.7 0.21 0.21 0.25 0.25
ET-EMT850 2.7 0.18 0.18 0.22 0.22
PT-MZ17K ET-EMT750 1.0 0.12 0.12 0.14 0.14
ET-EMT850 2.4 0.16 0.16 0.19 0.19
PT-MZ14K ET-EMT850 2.1 0.14 0.14 0.17 0.17
PT-MZ11K ET-EMT850 1.6 0.11 0.11 0.13 0.13
PT-MZ16K ET-EMT750 1.6 0.59 0.59 0.67 0.67
ET-EMT850 2.6 0.42 0.42 0.48 0.48
PT-MZ13K ET-EMT750 1.3 0.48 0.48 0.55 0.55
ET-EMT850 2.0 0.31 0.31 0.35 0.35
PT-MZ10K ET-EMT850 1.5 0.22 0.22 0.25 0.25
*1 HD: Hazard distance
*2 The values of D1 to D4 will change in accordance with the lens shift amount. Each value in the table is the
maximum value.
Note
zThe values in the table are based on IEC/EN 62471-5:2015.
zThe projectors compatible with each projection lens may be added or changed without notice. For the latest
information, refer to the website (https://panasonic.net/cns/projector/).
Attention
zIf the light projected from the projector directly enters the eyes while you are inside the hazard zone, the
retinas may be damaged. Do not enter the hazard zone during use. Alternatively, install the projector in a
location where the projected light will not directly enter the eyes.
Read this rst! (continued)
6-ENGLISH
■Supported projectors
PT-MZ20K / PT-MZ17K / PT-MZ14K / PT-MZ11K / PT-MZ16K / PT-MZ13K / PT-MZ10K
Note
zThis manual omits the alphabets at the end of projector model numbers.
zModels other than the above may also be supported. Refer to the operating instructions of
your projector or visit the following website.
https://panasonic.net/cns/projector/
zSome projection lens cannot be used depending on the firmware version of the projector.
Update the firmware to the latest version first in the case below.
For the updating procedure, refer to "Updating the rmware" (Operating Instructions –
Functional Manual: Chapter 5).
Firmware of the latest version can be downloaded from the following website.
https://panasonic.net/cns/projector/pass/
gET-EMS650 / ET-EMT750 / ET-EMT850
If the main version of the rmware of the PT-MZ16K / PT-MZ13K / PT-MZ10K is less than 1.25
or less than 2.13
If the rmware version of the PT-MZ17K / PT-MZ14K / PT-MZ11K is less than 1.10
gET-EMU100
If the main version of the rmware of the PT-MZ16K / PT-MZ13K / PT-MZ10K is less than 1.23
or less than 2.10
■Supplied Accessories
Make sure that the following has been provided.
Part name Appearance (quantity)
Lens cover
1 each for front and rear
Lens xing screw
(DPHD1008ZA/X1)
x4
Hex driver
x1
zThe product is delivered with lens
covers attached.
zThe shape and size of the lens
covers are different for each pro-
duct.
zSupplied only with the ET-EMU100.
The product may be delivered with
the lens fixing screws attached.
zUsed when attaching the projection
lens to the projector.
zSupplied only with the ET-EMU100.
zUsed when attaching the projection
lens to the projector.
Before Use
ENGLISH-7
Preparation
Before replacing the projection lens
Return the projection lens to the home position before replacing or removing it.
For details on how to return the lens to the home position, refer to the operating
instructions of the projector.
Attention
zMake sure that the projector power supply is switched off before attaching or detaching the
projection lens.
zAfter removing the projection lens, store it safely away from vibration or impacts.
zDo not touch the electric contact points of the projection lens with your fingers. Dust and dirt
on the contacts may cause contact malfunctions, while static electricity may damage the unit.
zDo not turn the gear (ring) part of the projection lens barrel by hand. Doing so may damage
the motor.
zDo not touch the surface of the lens with bare hands. Finger prints and dirt on the surface
of the lens will be magnified by the lens and lower the quality of the projected image. Place
the supplied lens cover on the zoom lens when the projector is not in use.
zThe lens is made of glass. The lens could be damaged if brought into contact with or
rubbed against hard objects. Handle the lens carefully.
zUse a clean, soft and dry cloth to wipe away dust and dirt from the projection lens.
Do not use fl uffy cloths containing oil, water or dust for cleaning. The lens is easily
damaged, so do not apply excessive pressure when wiping it.
Attaching the Lens / Detaching the Lens
For details on attaching or removing the projection lens, refer to the operating
instructions for the projector.
Attention
zWhen attaching the ET-EMU100 to the projector, fix it in place by tightening the lens fixing
screws (4 locations) as shown in the figure below to stabilize focus performance.
zUse the hex driver supplied with the ET-EMU100 to tighten the lens fixing screws.
Lens xing screw
Lens xing screw
8-ENGLISH
Preparation (continued)
Peripheral focus adjustment function
When you change the size of the projected image, the focal balance between the center
and peripheral areas of the screen may shift.
The ET-EMW200 / ET-EMW300 / ET-EMW400 / ET-EMW500 / ET-EMU100 is equipped
with a peripheral focus adjustment function to correct the shift in focal balance between
the center and peripheral areas of the screen.
For instructions on adjusting the peripheral focus, refer to “Projecting” in the operating
instructions for the projector.
Lens calibration
Perform lens calibration after attaching the lens.
For instructions on lens calibration, refer to “Projecting” in the operating instructions for
the projector.
ENGLISH-9
Projection relationships
The dimensional relationship between the screen and the projector is shown below.
■Dimensional relationship diagram
L (LW/LT)
L (LW/LT)
SW SH
H
SH
SW
SD
L1
L1
Screen
Projected image
Note
zThis diagram assumes that the size and position of the projected image will be adjusted so
that the image fills the entire screen.
zThis illustration is not drawn to scale.
L Projection distance H
Distance from the lens center to
the lower edge of the projected
image
LW Minimum distance SH Projected image height
LT Maximum distance SW Projected image width
L1 Lens protrusion dimension SD Projected image size
zDimension for L1 (approximate values) (Unit: m)
Projector
model
ET-EMW200 ET-EMW300 ET-EMW400 ET-EMW500 ET-EMS650 ET-EMT750 ET-EMT850 ET-EMU100
PT-MZ20K
PT-MZ17K
PT-MZ14K
PT-MZ11K
PT-MZ16K
PT-MZ13K
PT-MZ10K
0.152 0.121 0.121 0.122 0.117 0.166 0.173 0.346
Note
zThe illustrations of projectors in this manual are for informational purposes only and do not
represent a specific projector model. Configurations may vary with the model.
Attention
zTo prevent obstruction of the intake and exhaust vents, install the projector with a clearance
from walls and objects. For details about the required distance from surrounding walls and
objects, refer to the operating instructions for your projector.
10-ENGLISH
Projection relationships (continued)
If you are installing the projector in a sealed space, be sure to provide additional air conditioning
equipment and ventilation equipment. Insufficient ventilation will result in an accumulation of
heat and may activate the projector's protection circuit.
zAvoid setting up in places which are subject to sudden temperature changes, such as near
an air conditioner or lighting equipment (studio lamps, etc.).
■Dimensional relationship
For details on the projection distance (L), refer to “Projected image size and Projection
distance” and “Projection distance formulas” in the Appendix.
Note
zFor details on “Projected image size and Projection distance” for projector models other
than PT-MZ20K / PT-MZ17K / PT-MZ14K / PT-MZ11K / PT-MZ16K / PT-MZ13K / PT-
MZ10K, refer to “Setting up” in the operating instructions of the projector.
Perform the lens position shift within the adjustment range.
Perform lens shift adjustment within the ranges shown in the following illustrations.
The focus may change when the lens position is shifted out of the adjustment range.
This is because the movement of the lens is restricted to protect the optical parts.
Projection position can be adjusted with the optical axis shift based on the home position
in the respective range.
ET-EMW400 / ET-EMW500 /
ET-EMS650 / ET-EMT750 /
ET-EMT850
0.6V 0.6V
0.2H0.2H
0.28V 0.28V
Standard projection
position
Projected image
height V
Projected image width H
Optical axis center
Lens shift ranges
Dieses Handbuch passt für folgende Modelle
7
Inhaltsverzeichnis
Andere Panasonic Linse Handbücher
Panasonic
Panasonic ET-ELT30C Bedienungsanleitung
Panasonic
Panasonic ET-D3LEF70 Bedienungsanleitung
Panasonic
Panasonic ET-DLE035C Bedienungsanleitung
Panasonic
Panasonic ET-DLE020C Bedienungsanleitung
Panasonic
Panasonic AW-S14XBRM Bedienungsanleitung
Panasonic
Panasonic AW-LZ16MD73P Bedienungsanleitung
Panasonic
Panasonic WV-LZ62/8 Bedienungsanleitung
Panasonic
Panasonic S-R24105MGK Bedienungsanleitung
Panasonic
Panasonic ET-D75LE90 Bedienungsanleitung
Panasonic
Panasonic ET-DLE105C Bedienungsanleitung
Panasonic
Panasonic ET-DLE060C Bedienungsanleitung
Panasonic
Panasonic H-FS14140PP Bedienungsanleitung
Panasonic
Panasonic Lumix H-FS14140 Bedienungsanleitung
Panasonic
Panasonic Lumix H-PS14042 Bedienungsanleitung
Panasonic
Panasonic H-HSA35100PP Bedienungsanleitung
Panasonic
Panasonic Lumix H-ES12060 Installationsanleitung
Panasonic
Panasonic ET-D3LEW60 Bedienungsanleitung
Panasonic
Panasonic Lumix H-ES200 Bedienungsanleitung
Panasonic
Panasonic ET-D3LEU100C Bedienungsanleitung
Panasonic
Panasonic Lumix H-F007014 Bedienungsanleitung
Beliebte Linse Handbücher anderer Marken
FujiFilm
FujiFilm FUJINON ZA17x7.6BERD-S6 Bedienungsanleitung
Navitar
Navitar 1-51332 Leitfaden
Leica
Leica APO-SUMMICRON-SL 1:2/50 ASPH. Bedienungsanleitung
Sony
Sony LKRL-Z200 Series Bedienungsanleitung
Cosina
Cosina Voigtländer SUPER NOKTON 29mm F0.8... Bedienungsanleitung
Arax
Arax PCS ARSAT H(K) 4.5/55 Bedienungsanleitung
