Panasonic Transistors 2SB1722G Bedienungsanleitung
Transistors
1
Publication date: May 2007 SJC00389AED
This product complies with the RoHS Directive (EU 2002/95/EC).
2SB1722G
Silicon PNP epitaxial planar type
For high breakdown voltage low-frequency amplification
■Features
•High collector-emitter voltage (Base open) VCEO
•SS-Mini type package, allowing downsizing of the equipment and
automatic insertion through the tape packing
■Absolute Maximum Ratings Ta=25°C
Parameter Symbol Rating Unit
Collector-base voltage (Emitter open) VCBO −100 V
Collector-emitter voltage (Base open) VCEO −100 V
Emitter-base voltage (Collector open) VEBO −5V
Collector current IC−20 mA
Peak collector current ICP −50 mA
Collector power dissipation PC125 mW
Junction temperature Tj125 °C
Storage temperature Tstg −55 to +125 °C
■Electrical Characteristics Ta=25°C ±3°C
Parameter Symbol Conditions Min Typ Max Unit
Collector-base voltage (Emitter open) VCBO IC=−10 µA, IE=0 −100 V
Collector-emitter voltage (Base open) VCEO IC=−1 mA, IB=0 −100 V
Emitter-base voltage (Collector open) VEBO IE=−10 µA, IC=0 −5V
Collector-base cutoff current (Emitter open)
ICBO VCB =−50 V, IE=0 −100 nA
Collector-emitter cut-off current (Base open)
ICEO VCE =−50 V, IB=0 −1µA
Forward current transfer ratio hFE VCE =−10 V, IC=−2 mA 200 700
Collector-emitter saturation voltage VCE(sat) IC=−10 mA, IB=−1 mA −0.3 V
Transition frequency fTVCB =−5 V, IE=2 mA, f =200 MHz 200 MHz
Note) Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.
■Package
•Code
SSMini3-F3
•Marking Symbol: 4R
•Pin Name
1. Base
2. Emitter
3. Collector
2SB1722G
2SJC00389AED
This product complies with the RoHS Directive (EU 2002/95/EC).
VCE(sat) IChFE ICCob VCB
PCTaICVCE ICVBE
Ambient temperature Ta(°C)
Collector power dissipation PC(mW)
0 1507525 12550 100
0
150
50
125
100
25
75
0−12−10−8−2−6−4
0
−35
−30
−25
−20
−15
−10
−5
Collector-emitter voltage VCE (V)
Collector current I
C
(mA)
−2.0 mA
I
B
=−5.0 mA
T
a
=25°C
−4.5 mA
−4.0 mA
−2.5 mA
−3.0 mA
−3.5 mA
−1.5 mA
−1.0 mA
− 0.5 mA
0
0− 0.2 − 0.4 − 0.6 − 0.8 −1
−50
−45
−40
−35
−30
−25
−20
−15
−10
−5
Base-emitter voltage V
BE
(V)
Collector current I
C
(mA)
VCE =−10 V
Ta=85°C−25°C
25°C
Collector-emitter saturation voltage VCE(sat) (V)
Collector current IC(mA)
−1
− 0.1
− 0.01
− 0.01 − 0.1−1−10 −100
25°C
T
a
=85°C
−25°C
I
C
/I
B
=10
Forward current transfer ratio h
FE
Collector current I
C
(mA)
−1−10 −100
0
500
300
250
350
400
450
200
150
100
50
V
CE
=−10 V
T
a
=85°C
−25°C
25°C
0−20 −30−10 −40
0.1
10
1
100
Collector output capacitance
(Common base, input open circuited) Cob (pF)
Collector-base voltage VCB (V)
f =1 MHz
Ta=25°C
This product complies with the RoHS Directive (EU 2002/95/EC).
SSMini3-F3 Unit: mm
1.00 ±0.05
(0.50) (0.50)
1.60 +0.05
−0.03
0.26 +0.05
−0.02
12
3
0.85 +0.05
−0.03
1.60 ±0.05
0.70 +0.05
−0.03
0 to 0.10
(5°)
(0.45)
0.13 +0.05
−0.02
0.375 ±0.05
(5°)
Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1)If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2)The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other
company which may arise as a result of the use of technical information described in this book.
(3)The products described in this book are intended to be used for standard applications or general electronic equipment (such as office
equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
–Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-
ucts may directly jeopardize life or harm the human body.
–Any applications other than the standard applications intended.
(4)The products and product specifications described in this book are subject to change without notice for modification and/or im-
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5)When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6)Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7)This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita
Electric Industrial Co., Ltd.
Andere Panasonic Netzwerk-Hardware Handbücher
Panasonic
Panasonic Transistors 2SA2161J Bedienungsanleitung
Panasonic
Panasonic WJ-PB65E01 Bedienungsanleitung
Panasonic
Panasonic Schottky Barrier Diodes MA2SD30 Bedienungsanleitung
Panasonic
Panasonic Chip RC Networks EZACT Benutzerhandbuch
Panasonic
Panasonic Transistors 2SA1791J Bedienungsanleitung
Panasonic
Panasonic PN54021K Bedienungsanleitung
Panasonic
Panasonic i-pro WJ-NT304 Bedienungsanleitung
Panasonic
Panasonic Zener Diodes MAYS0750Y Bedienungsanleitung
Panasonic
Panasonic KX-TDA0187 Bedienungsanleitung
Panasonic
Panasonic WJ-PB85C16 Bedienungsanleitung
Panasonic
Panasonic PIN Diodes MA27P07 Bedienungsanleitung
Panasonic
Panasonic Transistors 2SB0621A Bedienungsanleitung
Panasonic
Panasonic EZADT series Bedienungsanleitung
Panasonic
Panasonic Rectifier Diodes MA6X129 Bedienungsanleitung
Panasonic
Panasonic Schottky Barrier Diodes MA24D60 Bedienungsanleitung
Panasonic
Panasonic SH-ALL1C Bedienungsanleitung
Panasonic
Panasonic k-nl304g Bedienungsanleitung
Panasonic
Panasonic Transistors 2SC3938G Bedienungsanleitung
Panasonic
Panasonic Transistors 2SC4691J Bedienungsanleitung
Panasonic
Panasonic Schottky Barrier Diodes MA3J7440G Bedienungsanleitung
Beliebte Netzwerk-Hardware Handbücher anderer Marken
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung
Yudor
Yudor YDS-16 Bedienungsanleitung
D-Link
D-Link ShareCenter DNS-320L Bedienungsanleitung
Samsung
Samsung ES1642dc Gebrauchsanweisung
Honeywell Home
Honeywell Home LTEM-PV Montageanleitung
