Panasonic I-pro WJ-NT314 Bedienungsanleitung

Before attempting to connect or operate this product,

please read these instructions carefully and save this manual for future use.

Network Interface Unit

Network Operating Instructions

Model No. WJ-NT314

LINK

RCV SND

OPERATE

Network Interface Unit WJ-NT314

CONTENTS

Preface ..................................................................................................................................... 3

About these operating instructions ....................................................................................... 3

Trademarks and registered trademarks ............................................................................... 3

Viewer Software ................................................................................................................... 3

Monitor Images on a PC ........................................................................................................... 4

Monitor images from a single camera .................................................................................. 4

Monitor images from multiple cameras ................................................................................ 8

Action at an Alarm Occurrence ................................................................................................. 9

About the image recognition function ....................................................................................... 10

About "Live" page when AVMD is activated ......................................................................... 11

Transmit Images onto an FTP Server ...................................................................................... 12

Transmit an alarm image at an alarm occurrence (Alarm image FTP transmission) ........... 12

Transmit images at a designated interval or period (FTP periodic transmission) ................ 12

Save images on the SD memory card when failed to transmit images by the FTP

periodic transmission function .............................................................................................. 13

About the Network Security of This Unit ................................................................................... 15

Equipped security functions ................................................................................................. 15

Display the Setup Menu and Configure the Settings of the Unit using a PC ............................ 16

How to display the setup menu ............................................................................................ 16

How to operate the setup menu ........................................................................................... 17

Configure the basic settings of the unit [Basic setup] ........................................................... 20

Configure the settings relating to images and audio [Camera setup] ................................... 26

Configures the multi-screen settings [Multi-screen setup] .................................................... 33

Configure the AVMD settings [Video analytics setup] .......................................................... 34

Configure the alarm settings [Alarm setup] .......................................................................... 40

Configure the settings relating to the authentication [Authentication setup] ......................... 46

Configure the settings of the servers [Server setup] ............................................................ 48

Configuring the network settings [Network setup] ................................................................ 50

Maintenance of the unit [Maintenance] ................................................................................ 57

About the Displayed System Log ............................................................................................. 60

Troubleshooting ........................................................................................................................ 62

Preface

About these operating instructions

There are 2 sets of operating instructions for the WJ-NT314 as follows.

• Operating Instructions (Book)

• Network operating instructions (PDF)

These operating instructions contain descriptions of how to operate this product using a PC via a network and of

how to configure the settings.

Refer to the operating instructions for descriptions of how to install this product and of how to connect to a network.

Adobe®Reader®is required to read these operating instructions (PDF). When the Adobe Reader is not installed on

the PC, download the latest Adobe Reader from the Adobe web site and install it.

Trademarks and registered trademarks

• Microsoft, Windows, Internet Explorer, ActiveX, and DirectX are either registered trademarks or trademarks of

Microsoft Corporation in the United States and/or other countries.

• Adobe and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United

States and/or other countries.

• SD logo is a trademark.

• Other names of companies and products contained in these operating instructions may be trademarks or regis-

tered trademarks of their respective owners.

Viewer Software

• Images will not be displayed when the viewer software "Network camera View3" is not installed on the PC. Install

the viewer software from the provided CD-ROM.

• The viewer software used on each PC should be licensed individually. Refer to your dealer for the software

licensing.

Monitor Images on a PC

The following are descriptions of how to monitor images from the unit on a PC.

Monitor images from a single camera

entries. The default user name and password are as

follows.

User name: admin

Password: 12345

When accessing the unit without changing the

default password, the pop-up window saying that it

is recommended to change the password will be dis-

played.

To enhance the security, change the password for

the user "admin". It is recommended to change this

password periodically. (☞page 46)

• When "Unicast port (AUTO)" or "Unicast port (MAN-

UAL)" is selected for "Transmission type" (☞page

28), up to 8 users per channel (up to 16 users for the

total of all the channels) can access the unit concur-

rently. Depending on the set values for "Total bit

rate" and "Max bit rate (per 1 client)", the maximum

concurrent access number may be limited. When 8

users have been concurrently accessing already, the

access limit message will be displayed for users who

accessed subsequently.

• When "ON" is selected for "MPEG-4 transmission"

(☞page 24), an MPEG-4 image will be displayed.

When "OFF" is selected, a JPEG image will be dis-

played. It is possible to display JPEG image even

when "ON" is selected for "MPEG-4 transmission".

In this case, the refresh interval will be lowered to

approx. half the set value.

When "ON" is selected for "MPEG-4 transmission"

JPEG (VGA): 15 fps

JPEG (QVGA): 60 fps

These are the total maximum values of all the chan-

nels.

The refresh interval may be longer depending on a

network environment, PC spec, photographic sub-

ject, access traffic, etc.

Important:

When displaying multiple MPEG-4 images on a PC,

images may not be displayed depending on the per-

formance of the PC.

Refer to the next page for further information about the

"Live" page.

Step 1

Start up the web browser.

Step 2

Enter the IP address designated using the Panasonic IP

setup software in the address box of the browser.

(Example: http://192.168.0.10/)

Important:

• When the HTTP port number is changed from "80",

enter "http://IP address of the unit +: (colon) + port

number" in the address box of the browser, for

example, "http://192.168.0.11:8080".

• When the PC is in a local network, configure the

web browser to bypass the proxy server for the local

address.

Step 3

Press the [Enter] key on the keyboard.

→The "Live" page will be displayed.

Important:

Follow the instructions on page 69 when the mes-

sage is displayed on the information bar of the

browser.

Notes:

• When "ON" is selected for "User Authentication", the

authentication window will be displayed before dis-

playing live images for the user name and password

About the "Live" page

q[Setup] button (*1)

Click this button to display the setup menu. The but-

ton will turn green and the setup menu will be dis-

played.

w[Live] button

The button will turn green and the "Live" page will be

displayed.

e[1] to [4] buttons

Click this button to display the "Live" page. The but-

ton will turn green and the "Live" page will be dis-

played. It is possible to select a desired channel by

clicking the [1] to [4] buttons.

rMulti-screen buttons

Images from multiple cameras can be displayed on

a multi-screen by registering cameras on the setup

menu. (☞page 8)

tImage type buttons

:The letters "MPEG-4" on the button will

turn green and an MPEG-4 image will be

displayed. When "OFF" is selected for

"MPEG-4 transmission" on the setup

menu, the [MPEG-4] button will not be dis-

played. (☞page 27)

:The letters "JPEG" on the button will turn

green and JPEG image will be displayed.

yAUX buttons (*2)

Select 1 (AUX1) to (AUX3) from the pull-down menu

and click the [OPEN/CLOSE] button. (☞page 43)

AUX1 and AUX2 are auxiliary outputs of camera.

AUX3 is the auxiliary output from the AUX 1 terminal

of this unit.

:The AUX connector will open.

:The AUX connector will close.

It is possible to change the names of AUX buttons

on the "Alarm setup" page. (☞page 43)

w[Live] button

e[1] to [4] buttons

q[Setup] button

yAUX buttons

rMulti-screen buttons

tImage type buttons

iZOOM buttons

oFOCUS buttons

!0 AUTO MODE !1 Control pad/buttons

!2 BRIGHTNESS buttons

!3 Preset

!6 Unit title

!8 Alarm occurrence indication button @0 One shot button

!9 Full screen button

@2 Audio output button

@1 Mic input button

@4 Main area

!5 Track

!4 Frame

uB/W button

@3 Time and date

!7 Camera title

uB/W button (*2)

Click the desired button to switch color (colour) of

the displayed images between color (colour) and

B/W.

:Images will be displayed in B/W (black and

white).

:Images will be displayed in color (colour).

:Activates Auto 1 mode. (The camera

selects black and white mode if the picture

is dark, or color mode if the picture is

bright enough.) If the camera has only one

AUTO mode, click this button.

:Activates Auto 2 mode. (The camera

detects the light source type to prevent

malfunction. This setting is applicable

when using a near-infrared light source in

a dark place.)

iZOOM buttons (*2)

:Click this button to adjust the zoom ratio to

the WIDE side.

:Click this button to set the zoom ratio to

x1.0.

:Click this button to adjust the zoom ratio to

the TELE side.

oFOCUS buttons (*2)

:Click this button to adjust the focus auto-

matically.

:Click this button to adjust the focus to the

NEAR side.

:Click this button to adjust the focus to the

FAR side.

!0 AUTO MODE (*2)

Select an operation from the pull-down menu and

click the [START] button. The selected operation will

start.

Click the [STOP] button to stop the operation.

The selected operation will stop when the camera

(panning/tilting/zooming/focusing) is operated.

Auto pan: Automatically pans between the start

position and the end position set in advance.

Even when the camera is operated for zooming

or focusing, the camera continues panning.

Sort: Sequentially switches between preset posi-

tions counterclockwise, starting from the camera

home position.

Sequence: Automatically moves to the preset posi-

tions orderly (start from the lowest preset posi-

tion number).

Patrol: Operates the camera in accordance with

patrol function settings.

Auto track: Performs auto track when the camera

supports auto track (AUTO TRACK).

Notes:

• To activate "Auto pan", "Sort", "Sequence", or

"Patrol", it is required to perform the settings on the

SETUP MENU of camera in advance. (☞page 28)

• To check if the camera supports auto track, refer to

the operating instructions of the camera.

!1 Control pad/buttons (*2)

: Left-click on the control pad or buttons

to adjust the horizontal/vertical position

of the camera (panning/tilting).

Panning/tilting speed will be faster if a

clicked point gets farther from the center

point of the control pad.

It is also possible to pan/tilt the camera by dragging

the mouse.

When the upper half area of the control pad is right-

clicked, the displayed image will be zoomed in.

When the lower half area is right-clicked, the dis-

played image will be zoomed out on. When the left

half area is right-clicked, the focus will be adjusted to

the NEAR side. When the right half area is right-

clicked, the focus will be adjusted to the FAR side.

!2 BRIGHTNESS buttons (*2)

:The displayed image will be darker.

:The adjusted brightness will return to the

default brightness.:

:The displayed image will be brighter.

Note:

When the BRIGHTNESS buttons are clicked while

the camera is at the preset position, the adjusted

brightness will automatically be registered for the

current preset position.

!3 Preset (*2)

Select a preset position from the pull-down menu

and click the [GO] button. The camera will move to

the selected preset position. When "Home position"

is selected, the camera will move to the home posi-

tion.

To activate preset positions and home position, it is

required to configure the settings on the SETUP

MENU of camera in advance. (☞page 28)

!4 Frame

Displays/hides the frame when a person is detected.

Refer to page 11 for further information.

!5 Track

Displays/hides the track of motion made by the

detected person.

Refer to page 11 for further information.

!6 Unit title

The unit title entered for "Unit title" on the [Basic] tab

will be displayed. (☞page 20)

!7 Camera title

The camera title set for [Camera title] will be dis-

played. (☞page 20)

!8 Alarm occurrence indication

button (*2)

This button will be displayed at an alarm occurrence,

and the channel of alarm occurrence (one of [1] to

[4] buttons) will light. When the button is clicked, the

button will disappear and the alarm output connector

will be reset. (☞page 40)

!9 Full screen button

Images will be displayed on a full screen. To return

to the "Live" page, press the [Esc] key. When dis-

playing images on a full screen, the audio output

button will become unavailable.

@0 One shot button

Click this button to take a picture (a still picture). The

picture will be displayed on a newly opened window.

When right-clicking on the displayed image, the pop-

up menu will be displayed. The displayed image can

be saved on the PC by selecting "Save" from the

pop-up menu.

The displayed image can be printed from the printer

by selecting "Print" from the pop-up menu. The

newly opened window will be closed by clicking the

"Close" button.

@1 Mic input button (*3)

Turns on/off the audio reception (hear audio from

the unit on a PC). This button will be displayed only

when "Mic input" or "Interactive" is selected for

"Audio mode" on the setup menu. (☞page 31)

When this button is clicked, the button will turn into

the button and audio from the unit will not be

heard.

Notes:

• When this button is clicked, audio from the PC will

be turned off.

When closing the window, click the button again to

turn on the audio.

• Audio reception is turned on for CH 1 only.

@2 Audio output button (*3)

Turns on/off the audio transmission (play audio from

the PC on the unit speaker). This button will be dis-

played only when "Audio output" or "Interactive" is

selected for "Audio mode" on the setup menu.

(☞page 31)

The button blinks while the audio transmission is

being carried out.

When this button is clicked, the button will turn into

the button and audio from the PC will not be

heard.

Notes:

• When a user is using the audio transmission func-

tion, the mic input button and the audio output button

will be inoperable for the other users.

• Possible duration of audio transmission is up to 5

minutes per transmission. When 5 minutes have

passed, the audio transmission function will be can-

celed and the audio reception function will automati-

cally be turned on. To turn the audio transmission

function on, click the audio output button again.

• Audio transmission is turned on for CH 1 only.

@3 Time and date

Current time will be displayed in the set date/time

display format (☞page 20).

@4 Main area (*2)

Images from the camera will be displayed in this

area.

Click a desired point in the main area on the "Live"

page that is to be the centre of the angle of view.

The camera moves to adjust the position in order to

set the clicked point as the centre.

Note:

When using this function, set "PROPO.P/T" of cam-

era to ON. (☞page 30)

The following cameras are available for the function.

WV-CS950 series, WV-CW960 series, WV-CW970

series (as of August 2007)

Monitor images from multiple cameras

Images from multiple cameras can be displayed on a multi-screen. Images from 4 cameras can be displayed simul-

taneously. To display images on a multi-screen, it is necessary to register cameras in advance. 4 cameras can be

registered as a group and up to 4 groups (16 cameras) can be registered. (☞page 33)

Important:

• Select "OFF" for both the user authentication and the host authentication of the network device to be registered.

• Only JPEG images can be displayed on a multi-screen. Audio will not be heard.

• Multi-screen is the function that is available using this unit.

When the power is turned off or the LAN cable is disconnected while displaying images, displaying images on a

multi-screen will become unavailable.

Step 1

Click one of the multi-screen buttons.

→Images from the registered cameras will be displayed

on a 4-split screen.

qTo display images on a single screen, click the [1]

button or [Live] button.

wClick a camera title. Live images from the camera

corresponding to the clicked camera title will be dis-

played on the "Live" page of the newly opened win-

dow.

*1 Operable by only users and hosts whose access

level is "1. Administrator"

*2 Only operable by users and hosts whose access

level is "1. Administrator" or "2. Camera control"

when "ON" is selected for "User authentication"

(☞page 46) and "Host authentication" (☞page 47).

*3 Operable by users and hosts who belong to the

access level selected for "Authentication" on the

[Audio] tab of the "Camera setup" page. (☞page 32)

Refer to page 46 for further information about the

access level.

Important:

It is impossible to display images and to receive/

transmit audio between the unit and the PC when

the viewer software "Network Camera View3" is not

installed on the PC. (Refer to the operating instruc-

tions for descriptions of how to install.)

Action at an Alarm Occurrence

The alarm action will be performed when the following alarm occur.

Alarm type

Terminal alarm: When connecting an alarm device such as a sensor to the connector terminal (Alarm Input

No. 1 to 4) on the rear of the unit, the alarm action (unit action at an alarm occurrence) will be performed

when the connected alarm device is activated. Alarm action to be performed differs depending on the settings

configured on the [Alarm] tab. (☞page 41)

Camera site alarm: When a camera connected to a VIDEO IN connector detects an alarm by alarm sensors or

cameras' motion detectors, etc., and the unit receives the alarm input signal from the camera, the alarm

action will be performed. (☞page 41)

Video loss: When the loss of video input signals is detected due to coaxial cable disconnections or camera trou-

bles, the alarm action will be performed. (☞page 41)

Command alarm: When a Panasonic alarm protocol is received from the connected device via a network, the

alarm action will be performed. (☞page 41)

AVMD (Advanced Video Motion Detector): When a person is detected in the image from a camera connected

to a VIDEO IN connector, the alarm action will be performed. (☞page 40)

Action at an Alarm Occurrence

Display the alarm occurrence indication button on the "Live" page (☞page 5).

The alarm occurrence indication button will be displayed on the "Live" page at an alarm occurrence.

Note:

The alarm occurrence indication button will be refreshed in 30 seconds intervals. For this reason, it may take a

maximum of 30 seconds until the alarm occurrence indication button is displayed on the "Live" page at an alarm

occurrence.

Notify of alarm occurrences to the device connected to the alarm connector

It is possible to output signals from the alarm connector on the rear of the unit and sound the buzzer when an alarm

occurs. The settings for the alarm output can be configured on the [Alarm] tab of the "Alarm setup" page.

(☞page 43)

Transmit an image onto a server automatically

An alarm image can be transmitted at an alarm occurrence to the server designated in advance. The settings

required to transmit an alarm image to a server can be configured in the "Alarm image setup" section of the [Alarm]

tab of the "Alarm setup" page (☞page 42) and the [FTP] tab of the "Server setup" page (☞page 49).

Notify of alarm occurrences by e-mail

Alarm mail (alarm occurrence notification) can be sent at an alarm occurrence to the e-mail addresses registered in

advance. Up to 4 addresses can be registered as recipients of the alarm mail. The settings for alarm mail can be

configured in the "E-mail notification setup" section of the [Notification] tab of the "Alarm setup" page (☞page 44)

and the [Mail] tab of the "Server setup" page (☞page 48).

Notify of alarm occurrences to the designated IP addresses (Panasonic alarm protocol)

This function is available only when Panasonic device, such as the network disk recorder, is connected to the sys-

tem. When "ON" is selected for "Panasonic alarm protocol", the connected Panasonic device will be notified that the

unit is in the alarm state. The settings for Panasonic alarm protocol can be configured on the [Notification] tab of the

"Alarm setup" page. (☞page 44)

About the image recognition function

AVMD, which is one of the image recognition functions, are featured in this unit.

It is possible to detect moving, abandoned, or removed objects in the shooting area by setting the detection program

in advance. (☞page 34)

When an abandoned or removed object is detected, the frame and track, are displayed on the live images. (☞page

12)

Auto track for the detected object is also possible using another analog camera. (☞page 41)

It is also possible to specify the range of people’s motion and the size of detected object by setting the detection

depth.

AVMD can be activated for up to 2 channels at the same time.

Intruder detection

The motion of object is detected in the shooting area of the channel for which the AVMD is activated.

Up to 8 objects can be detected simultaneously per channel. It is impossible to recognize 9 objects or more.

(Depending on the size of moving object, less than 8 objects can be detected.)

The detection status will be canceled when the moving object goes out of the shooting area.

By setting the intruder detection area (☞page 34), it is possible to activate an alarm when a moving object goes into

the area. (To prevent false notifications, it is necessary for the object to be detected as a moving object for 2 sec-

onds or more.)

Detection of abandoned or removed objects

By setting the detection area of object abandonment / removal (☞page 34) in the shooting area of the channel for

which the AVMD is activated, it is possible to activate an alarm when an object is abandoned in the area or removed

from the area. (To prevent false notifications, it is necessary for the object to be detected as an abandoned or

removed object for 20 seconds or more.)

Up to 8 objects can be detected simultaneously per channel. It is impossible to recognize 9 people or more.

The detection status will be canceled when around 40 seconds have passed after the detection.

Important:

AVMD will be activated even after the camera moves or is moving from the selected preset position. To prevent

false notifications, it is recommended not to move the camera connected to the channel for which the AVMD is

activated.

About AVMD (Advanced Video Motion Detection)

AVMD of this unit is the image recognition function that detects motion based on the luminance transition in a desig-

nated area. Under the following circumstances, AVMD may not be activated properly.

•There is no difference in luminance level between the moving object and background.

• Luminance level of image is too low (During nighttime, etc.)

• Movement of object is too fast or too slow.

• Object is too big or too small.

• Luminance level of shooting area is subject to change (outdoors, by the window, etc.)

• Outside light (sunlight, headlights, etc.) enters the shooting area.

• Fluorescent light is flickering.

• Depth of object is too long.

• Dirt, drip, or splash is on the dome cover of camera.

• Object is moving directly toward the camera.

• Too many objects are moving.

• Camera is shaking.

Inhaltsverzeichnis

Andere Panasonic Netzwerk-Hardware Handbücher

Panasonic

Panasonic WJ-NX200K Bedienungsanleitung

Panasonic

Panasonic CZ-CFUSCC1 Bedienungsanleitung

Panasonic

Panasonic Schottky Barrier Diodes MA3J745EG Bedienungsanleitung

Panasonic

Panasonic WJPB65M16 - VIDEO OUTPUT BOARD-WJSX650... Bedienungsanleitung

Panasonic

Panasonic K-NL408KT/G Bedienungsanleitung

Panasonic

Panasonic BB-HCS301A - Network Camera Server Betriebsanleitung

Panasonic

Panasonic Fast Recovery Diodes MA2DF60 Bedienungsanleitung

Panasonic

Panasonic Schottky Barrier Diodes MA2SD31 Bedienungsanleitung

Panasonic

Panasonic Transistors 2SC2480 Bedienungsanleitung

Panasonic

Panasonic Transistors 2SB1462J Bedienungsanleitung

Panasonic

Panasonic PIN diodes MA27P02 Bedienungsanleitung

Panasonic

Panasonic PIN diodes MA27P110G Bedienungsanleitung

Panasonic

Panasonic LJ-SK56A Bedienungsanleitung

Panasonic

Panasonic Schottky Barrier Diodes MA2Z720 Bedienungsanleitung

Panasonic

Panasonic Phototransistors PNZ154NC Bedienungsanleitung

Panasonic

Panasonic Transistors 2SA0720 Bedienungsanleitung

Panasonic

Panasonic KX-HTS Series Bedienungsanleitung

Panasonic

Panasonic WJ-NT104 Bedienungsanleitung

Panasonic

Panasonic Zener Diodes MALS068X Bedienungsanleitung

Panasonic

Panasonic K-NL408KT/G Bedienungsanleitung

Panasonic

Panasonic SH-ALL1C Bedienungsanleitung

Panasonic

Panasonic Transistors 2SC1318 Bedienungsanleitung

Panasonic

Panasonic WJ-PB85T08 Bedienungsanleitung

Panasonic

Panasonic PN261693D Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung

Panasonic i-pro WJ-NT314 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken