Panasonic Transistors 2SC4805G Bedienungsanleitung
Transistors
1
Publication date: May 2007 SJC00367AED
This product complies with the RoHS Directive (EU 2002/95/EC).
2SC4805G
Silicon NPN epitaxial planar type
For 2 GHz band low-noise amplification
■Features
•High transition frequency fT
•S-Mini type package, allowing downsizing of the equipment and
automatic insertion through the tape packing and the magazine
packing
■Absolute Maximum Ratings Ta=25°C
Parameter Symbol Conditions Min Typ Max Unit
Collector-base cutoff current (Emitter open)
ICBO VCB =10 V, IE=01µA
Emitter-base cutoff current (Collector open)
IEBO VEB =1 V, IC=01µA
Forward current transfer ratio *hFE VCE =8 V, IC=20 mA 50 300
Transition frequency fTVCE =8 V, IC=15 mA, f =1.5 GHz 7.0 8.5 GHz
Collector output capacitance Cob VCB =10 V, IE=0, f =1 MHz 0.6 1.0 pF
(Common base, input open circuited)
Forward transfer gain S21e2VCE =8 V, IC=15 mA, f =1.5 GHz 7 9 dB
Maximum unilateral power gain GUM VCE =8 V, IC=15 mA, f =1.5 GHz 10 dB
Noise figure NF VCE =8 V, IC=7 mA, f =1.5 GHz 2.2 3.0 dB
■Electrical Characteristics Ta=25°C ±3°C
Parameter Symbol Rating Unit
Collector-base voltage (Emitter open) VCBO 15 V
Collector-emitter voltage (Base open) VCEO 10 V
Emitter-base voltage (Collector open) VEBO 2V
Collector current IC65 mA
Collector power dissipation PC150 mW
Junction temperature Tj150 °C
Storage temperature Tstg −55 to +150 °C
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.
2. *: Rank classification
Rank Q R S No-rank
hFE 50 to 120 100 to 170 150 to 300 50 to 300
Marking symbol 3SQ 3SR 3SS 3S
Product of no-rank is not classified and have no indication for rank.
■Package
•Code
SMini3-F2
•Marking Symbol: 3S
•Pin Name
1: Base
2: Emitter
3: Collector
2SC4805G
2SJC00367AED
This product complies with the RoHS Directive (EU 2002/95/EC).
VCE(sat) IChFE ICfTIC
PCTaICVCE ICVBE
Cob VCB GUM ICNF IC
0 16040 12080
0
200
160
120
80
40
Collector power dissipation P
C
(mW)
Ambient temperature T
a
(°C)
012108264
0
30
25
20
15
10
5
Ta=25°C
200 µA
150 µA
100 µA
50 µA
IB=250 µA
Collector current I
C
(mA)
Collector-emitter voltage V
CE
(V)
0 1.21.00.80.2 0.60.4
0
120
100
80
60
40
20
VCE =8 V
Ta=75°C−25°C
25°C
Base-emitter voltage V
BE
(V)
Collector current I
C
(mA)
0.1 1 10 100
0.001
0.01
0.1
1
10 I
C
/ I
B
=10
T
a
=75°C
25°C
−25°C
Collector-emitter saturation voltage VCE(sat) (V)
Collector current IC(mA)
0.1 1 10 100
0
240
200
160
120
80
40
VCE =8 V
Ta=75°C
25°C
−25°C
Forward current transfer ratio hFE
Collector current IC(mA)
1 10 100
0
12
10
8
6
4
2
VCB =8 V
f =1.5 GHz
Ta=25°C
Transition frequency fT(GHz)
Collector current IC(mA)
1 10 100
0
1.2
1.0
0.8
0.6
0.4
0.2
I
E
=0
f =1 MHz
T
a
=25°C
Collector-base voltage V
CB
(V)
Collector output capacitance
(Common base, input open circuited) C
ob
(pF)
0.1 1 10 100
0
12
10
8
6
4
2
V
CE
=8 V
f =1.5 GHz
T
a
=25°C
Maximum unilateral power gain G
UM
(dB)
Collector current I
C
(mA)
0.1 1 10 100
0
6
5
4
3
2
1
VCE =8 V
f =1.5 GHz
Ta=25°C
Noise figure NF (dB)
Collector current IC(mA)
This product complies with the RoHS Directive (EU 2002/95/EC).
SMini3-F2 Unit: mm
0.30 +0.05
−0.02
0.13 +0.05
−0.02
2.00 ±0.20
(0.89)
0.90 ±0.10
(0.65)(0.65)
1.30 ±0.10
1.25 ±0.10
2.10 ±0.10
0.425 ±0.050
(0.49)
0 to 0.10
(5°)
(5°)
3
12
Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1)If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2)The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other
company which may arise as a result of the use of technical information described in this book.
(3)The products described in this book are intended to be used for standard applications or general electronic equipment (such as office
equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
–Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-
ucts may directly jeopardize life or harm the human body.
–Any applications other than the standard applications intended.
(4)The products and product specifications described in this book are subject to change without notice for modification and/or im-
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5)When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6)Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7)This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita
Electric Industrial Co., Ltd.
Andere Panasonic Netzwerk-Hardware Handbücher
Panasonic
Panasonic WJ-PB85X08 Bedienungsanleitung
Panasonic
Panasonic Transistors 2SC5632G Bedienungsanleitung
Panasonic
Panasonic Switching Diodes MA3J142AG Bedienungsanleitung
Panasonic
Panasonic EZADT series Bedienungsanleitung
Panasonic
Panasonic Fast Recovery Diodes MA2DF60 Bedienungsanleitung
Panasonic
Panasonic Transistors 2SA2161J Bedienungsanleitung
Panasonic
Panasonic Transistors 2SB0621A Bedienungsanleitung
Panasonic
Panasonic K-NL408KT/G Bedienungsanleitung
Panasonic
Panasonic Schottky Barrier Diodes MA3Z792DG Bedienungsanleitung
Panasonic
Panasonic Schottky Barrier Diodes MA2Z720 Bedienungsanleitung
Panasonic
Panasonic LJ-SK56A Bedienungsanleitung
Panasonic
Panasonic KX-HTS Series Bedienungsanleitung
Panasonic
Panasonic Transistors 2SC3937G Bedienungsanleitung
Panasonic
Panasonic Schottky Barrier Diodes MA3Z7930G Bedienungsanleitung
Panasonic
Panasonic Schottky Barrier Diodes MA27D270G Bedienungsanleitung
Panasonic
Panasonic Chip RC Networks EZACT Benutzerhandbuch
Panasonic
Panasonic K-NL404K/G Bedienungsanleitung
Panasonic
Panasonic Transistors 2SC3935 Bedienungsanleitung
Panasonic
Panasonic TY-FB7HM Bedienungsanleitung
Panasonic
Panasonic Transistors 2SC5846 Bedienungsanleitung
Beliebte Netzwerk-Hardware Handbücher anderer Marken
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung
Yudor
Yudor YDS-16 Bedienungsanleitung
D-Link
D-Link ShareCenter DNS-320L Bedienungsanleitung
Samsung
Samsung ES1642dc Gebrauchsanweisung
Honeywell Home
Honeywell Home LTEM-PV Montageanleitung
