Panasonic Elite sc-91 Bedienungsanleitung

Quick Start Guide

Guide rapide

http://www.pioneerelectronics.com (US)

http://www.pioneerelectronics.ca (Canada)

AV Receiver

Récepteur AV SC-91

English

VENTILATION CAUTION

When installing this unit, make sure to leave space

around the unit for ventilation to improve heat radiation

(at least 20 cm at top, 10 cm at rear, and 20 cm at each

side).

WARNING

Slots and openings in the cabinet are provided for

ventilation to ensure reliable operation of the product,

and to protect it from overheating. To prevent fire

hazard, the openings should never be blocked or

covered with items (such as newspapers, table-cloths,

curtains) or by operating the equipment on thick carpet

or a bed.

D3-4-2-1-7b*_A1_En

What’s in the box

Thank you for buying this Pioneer product. This Quick Start Guide includes instructions for basic connections and operations to

allow simple use of the receiver. For detailed descriptions of the receiver, see the “Operating Instructions” provided on the

included CD-ROM ( ).

Remote Control

Setup microphoneAAA size IEC R03 dry cell batteries x2

AM loop antenna

FM wire antenna

These quick start guide

Warranty sheet

Safety Brochure

Power cord

CD-ROM

RECEIVER

D.ACCESS

DIMMER SLEEP

RCU SETUP

MPX

PRESET TUNE

BAND PTY

iPod

TUNER

INPUT

USB ADPT ROKU

MHL

OUT P.

DVDBD

ALL ZONE STBY

SOURCE

STANDBY/ON

MAIN

SAT

SUB ZONE CONTROL

SOURCE CONTROL

MUTE

VOLUME

VOL

TOP

HOME

TOOLS

ENTER

RETURN

CLASS

ENTER

CLR

546

AUDIO

DISP

SURRAUTO

CH LV.

ADV

STATUS

AUDIO P. VIDEO P.

Z2 Z3 HDZ

LISTENING MODE

HDMI

NET

ALL

Fav

RECEIVER

SC-91

Connection and initial setup

Perform connection and initial settings in any of the ways listed below.

Read the booklet in the order of



Follow the instructions of each step to

proceed.

LAN

Download “Start-up Navi” app from here.

Download and start “Start-up Navi” app.

Proceed along with the app guidance to

perform connection and initial settings.

Please read the booklet ”If you have a Mac/

PC”.

Follow the guidance of the AVNavigator

built into the receiver to proceed with the

connection and initial settings.

Use

“Start-up Navi”

app to perform

connection and initial settings

• Use a smartphone/tablet.

• Network connection is required.

Follow the guidance of the built-in

AVNavigator to perform connection

and initial settings

• Use a Mac/PC.

• Network connection is required.

Follow the instructions in the

booklet to perform connection

and initial settings

If you have an iPhone or iPad

Please search for “Start-up Navi” app in the App

Store.

If you have an Android device

Please search for “Start-up Navi” app in Google

Play.

Regarding WIRELESS indicator flashing

• Flashes when using WAC Mode. (Mode where network

settings can be changed by iPhone, iPad and iPod

touch, when this receiver is being used as a Wi-Fi

Access point)

When the power is turned on after executing network

settings or through wired LAN connection, the

WIRELESS indicator will stop blinking.

• When not making a network connection, there is no

problem using it as is.

Connecting to the network through LAN interface

NETWORK

WAN

LAN

LAN cable (sold separately)

Internet

Modem

Router

Computer

When connecting this receiver to a wireless LAN router by Wi-Fi, refer to the “Basic Setup” →“Setting by referring to the

operating instructions” →“Setting network connection” in the CD-ROM’s operating instructions.

Plugging in the receiver

After connecting to a LAN, connect the power cord of the

receiver to a power outlet.

Plug the supplied power cord into the AC IN socket on the

back of the receiver.

Plug the other end into a power outlet.

Turning the power on

Press STANDBY/ON to switch on the receiver and your

computer.

Wait a few minutes after turning the power on before

performing the following operation.

STANDBY/ON

If you have a Mac/PC

Launching the built-in AVNavigator

Operate AVNavigator by following the screen prompts of your

computer. When the WIRELESS indicator is blinking slowly,

the AVNavigator cannot be started. Turn this receiver off,

connect the LAN cable, and turn it on again.

Using Mac

Launch Safari and click <SC-91> displayed in ‘Bonjour’ on

the Bookmarks bar.

• If ‘Bonjour’ is not displayed, tick the ‘Include Bonjour in

the Favorites bar’ check box on the ‘Advanced’ tab in

the Safari ‘Preferences...’ menu.

Using Windows PC

Start up Internet Explorer on your PC (open

any random Internet page).

Press STATUS on the remote control and check

the front panel display on the receiver (the IP

address of the receiver will appear).

(Example Text Display)

If 0.0.0.0, 192.168.1.1 or 169.254.112.202 appears in the

address, it indicates that the receiver is not connected

to the network. Check to make sure that the receiver and

router are properly connected.

Enter number in 2 above in the field in

Internet Explorer shown below and then press

the ENTER key.

(Example Input Format) 192.168.0.124

• With a Windows PC, you can use the following method to

launch AVNavigator.

Launch Explorer and then right-click <SC-91> displayed in

the ‘Network’ folder, then click ‘View device webpage’.

About using Wiring Navi

Wiring Navi starts when ‘Wiring Navi’ is pressed on the

AVNavigator screen.

• When connection navigation is finished, proceed to

Interactive Operation Guide.

Operating environment

• AVNavigator can be used in the following environments.

–Windows PC: Microsoft®Windows Vista®/Windows®7/

Windows®8/Windows®8.1

–Mac: OS X v 10.9 or 10.8

• Some AVNavigator functions use an Internet browser. The

following browsers are supported:

–Windows PC: Internet Explorer®8, 9, 10, 11

–Mac OS: Safari 6.0, 7.0

• Depending on the computer network setting or security

setting, AVNavigator may not operate.

Placing the Speakers

SBR

TMdL TMdR

SBL

SRSL

L– Front Left

C– Center

R– Front Right

SL – Surround Left

SR – Surround Right

SBL – Surround back Left

SBR – Surround back Right

TMdL – Top middle Left

TMdR – Top middle Right

SW – Subwoofer

Notes

• There are also other speaker connection

patterns (front wide, etc.). For details, see

“Connecting your equipment” of the operating

instructions.

• To play Dolby Atmos, you need to connect the

speaker of either the Top middle, Surround

back, or Front wide.

• When both top middle and surround back are

connected, sounds will come out from either

one of the speakers according to the listening

mode etc.

• The Dolby Enabled Speaker can be used in

place of the Top middle speaker. Refer to the

operating instructions for details.

Connecting up

Follow the booklet instructions to perform connection and initial settings

Connecting up

Connecting the speakers

• You can use speakers with a nominal impedance between

4 Ω and 16 Ω.

Bare wire connections

Twist exposed wire strands together.

Loosen terminal and insert exposed wire.

Tighten terminal.

12 3

10 mm

(3/8 in.)

PRE OUT

(Single)

SUBWOOFER

SPEAKERS

FRONT CENTER

A A

SURROUND

SURROUND BACKTOP MIDDLE /

SELECTABLE

LINE LEVEL

INPUT

Subwoofer

(SW)

Front Right

(R)

Surround Right

(SR)Surround Left

(SL)

Front Left

(L)

Center

(C)

Surround back Right

(SBR)

Surround back Left

(SBL)

CAUTION

• These speaker terminals carry HAZARDOUS LIVE voltage. To prevent the risk of electric shock when connecting or

disconnecting the speaker cables, disconnect the power cord before touching any uninsulated parts.

Top middle Right

(TMdR)

Top middle Left

(TMdL)

Connecting a TV and playback components

Connecting using HDMI

OUT

AC IN

(HDZONE)

MAIN

(OUTPUT 5 V 0.9 A MAX)

(OUTPUT 12 V

TOTAL 150 mA MAX)

OPTICAL

COAXIAL

ASSIGNABLE

SELECTABLE

ASSIGNABLE

PRE OUT

(Single)

SUBWOOFER

DVR/BDR

ZONE 2

PRE OUT

SAT/CBL

IN OUT

COMPONENT VIDEO

ANTENNA

CONTROL

AM LOOP

FM UNBAL 75

RS-232C

12 V

TRIGGER

SPEAKERS

FRONT CENTER

A A

SURROUND

SURROUND BACKTOP MIDDLE /

(CD)

23 4 6

/MHL

(TV)

(SAT/CBL)

(SAT/

CBL)

(SAT/CBL)(DVD)(

DVR/BDR)

ARC

HDMI OUT

NETWORK

VIDEO/AUDIO

HDMI IN

DIGITAL IN

CONTROL

ASSIGNABLE

MONITOR OUT

SELECTABLE

BD IN

HDMI OUT

HDMI IN

DIGITAL AUDIO OUT

OPTICAL

HDMI OUT HDMI OUT

SAT/CBL IN

DVR/BDR IN

GAME IN

OPTICAL

IN1 (TV)

HDMI OUT

HDMI

OUT

DVD IN

• If the TV supports the HDMI Audio Return Channel function, the sound of the TV is input to the receiver via the HDMI

terminal, so there is no need to connect an optical digital cable (

). In this case, set ARC at HDMI Setup to ON. For details,

see “HDMI Setup” of the operating instructions.

• Please refer to the TV’s operation manual for directions on connections and setup for the TV.

Connecting antennas

ANTENNA

AM LOOP

ab c

Plugging in the receiver

Only plug in after you have connected all your components to

this receiver, including the speakers.

CAUTION

• Handle the power cord by the plug. Do not pull out the plug

by tugging the cord and never touch the power cord when

your hands are wet as this could cause a short circuit or

electric shock. Do not place the unit, a piece of furniture,

etc., on the power cord, or pinch the cord. Never make

a knot in the cord or tie it with other cords. The power

cords should be routed such that they are not likely to be

stepped on. A damaged power cord can cause a fire or give

you an electrical shock. Check the power cord once in a

while. When you find it damaged, ask your nearest Pioneer

authorized service center or your dealer for a replacement.

• The receiver should be disconnected by removing the

mains plug from the wall socket when not in regular use,

e.g., when on vacation.

Plug the supplied power cord into the AC IN socket on the

back of the receiver.

Plug the other end into a power outlet.

HDMI/DVI-compatible TV

DVD player Blu-ray Disc player Set-top box

Game console

You will not be

able to view the

setting screen from

the TV unless this

cable is connected.

HDMI/DVI-compatible components

AM loop antenna

FM wire

antenna

Connecting up

HDD/DVD recorder,

Blu-ray Disc recorder

Before you start

Put the batteries in the remote control.

Switch on the receiver and your TV.

ALL ZONE STBY

SOURCE

STANDBY/ON

MAIN

SUB ZONE CONTROL

SOURCE CONTROL

Z2 Z3 HDZ

HDMI

RECEIVER

Switch the TV input so that it connects to the

receiver.

Turn the subwoofer on and turn up the

volume.

CAUTION

• Do not use or store batteries in direct sunlight or other

excessively hot place, such as inside a car or near a

heater. This can cause batteries to leak, overheat, explode

or catch fire. It can also reduce the life or performance of

batteries.

• When inserting the batteries, make sure not to damage

the springs on the battery’s *terminals. This can cause

batteries to leak or overheat.

• When disposing of used batteries, please comply with

governmental regulations or environmental public

institution’s rules that apply in your country/area.

Automatically setting up for surround sound (MCACC)

The Auto Multi-Channel ACoustic Calibration (MCACC) setup

uses the supplied setup microphone to measure and analyze

the test tone that is outputted by the speakers.

Important

• Measure in a quiet environment.

Connect the supplied setup microphone.

• When connecting the MCACC setup microphone, if

“Please wait ...” displays in the main unit display, remove

the MCACC setup microphone, then try reconnecting after

waiting for approximately one minute.

• Set to ear height when using a tripod etc., for the

microphone.

MASTER

VOLUME

STANDBY/ON

INPUT

SELECTOR

MCACC

SETUP

MIC

The Full Auto MCACC screen appears on your TV.

Speaker System : 7.2ch/5.2.2ch

Exit

2a.Full Auto MCACC Return

START

EQ Type : SYMMETRY

SP to ceiling : – – –

MCACC : M1.MEMORY 1

Dolby Enabled Speaker

: NO

Measurement Type : Expert

Setup microphone

Tripod

Press MAIN RECEIVER on the remote control,

then press the ENTER button.

• Automatic measuring will start.

• Measuring will take about 3 to 12 minutes.

Follow the instructions on-screen.

• Automatic setting is complete when the Home Menu

screen appears.

• If Reverse Phase is displayed, the speaker’s wiring (+ and –)

may be inverted. Check the speaker connections.

Even if the connections are correct, Reverse Phase may be

displayed, depending on the speakers and the surrounding

environment. This does not affect measurements, however,

so select Go Next.

• If ERR is displayed, check that speaker is properly connected.

• When the power turns off, refer to the “Frequently asked

questions” in the booklet.

Make sure the setup microphone is

disconnected.

Initial Setup

Basic playback

Multichannel playback

RECEIVER

D.ACCESS

DIMMER SLEEP

RCU SETUP

MPX

PRESET TUNE

BAND PTY

iPod

TUNER

INPUT

USB ADPTROKU

MHL

OUT P.

DVDBD

ALL ZONE STBY

SOURCE

STANDBY/ON

MAIN

SAT

SUB ZONE CONTROL

SOURCE CONTROL

MUTE

VOLUME

VOL

TOP

HOME

TOOLS

ENTER

RETURN

CLASS

ENTER

CLR

546

AUDIO

DISP

SURRAUTO

CH LV.

ADV

STATUS

AUDIO P. VIDEO P.

Z2 Z3 HDZ

LISTENING MODE

HDMI

NET

ALL

Fav

RECEIVER

Switch on the playback component.

E.g.) Turn the Blu-ray Disc player connected to the HDMI

BD IN terminal on.

Switch the input of the receiver.

E.g.) Press BD to select the BD input.

Press AUTO to select ’AUTO SURROUND’.

Also press SURR or ADV for multichannel playback. Select

your preferred listening mode.

Start the playback component’s playback.

E.g.) Start playback of the Blu-ray Disc player.

Use VOLUME +/– to adjust the volume level.

• When no sound is emitted, increase the volume to

approximately –30 dB.

Notes

• When the sound is not produced from the center speaker,

rear speaker and subwoofer, refer to “Frequently asked

questions” in the booklet.

• When the remote control does not work, refer to the

“Frequently asked questions” in the booklet.

To enjoy the many functions of the

unit to the fullest extent

Load the CD-ROM into your computer and see

the “Operating Instructions” (PDF) from the

menu screen to read.

Notes

• This unit supports AirPlay. For details, see “Using AirPlay

on iPod touch, iPhone, iPad, and iTunes” of the operating

instructions and the Apple website (http://www.apple.

com).

• This unit’s software can be updated (“Software Update”

of the operating instructions). With Mac OS, it can

be updated using Safari (“Using Safari to update the

firmware” of the operating instructions).

Inhaltsverzeichnis

Sprachen:

Andere Panasonic Empfänger Handbücher

Panasonic

Panasonic RF-B65D Bedienungsanleitung

Panasonic

Panasonic RF-NA06R Bedienungsanleitung

Panasonic

Panasonic RF-2400D Bedienungsanleitung

Panasonic

Panasonic DMREZ485V - DVD RECORDER - MULTI LANGUAGE Bedienungsanleitung

Panasonic

Panasonic SAXR10PP Bedienungsanleitung

Panasonic

Panasonic SAHE9 - RECEIVER Bedienungsanleitung

Panasonic

Panasonic FZ-AAE184E Bedienungsanleitung

Panasonic

Panasonic CF-AA Series Bedienungsanleitung

Panasonic

Panasonic CQVA70EU - CAR AUDIO/VIDEO SYS Bedienungsanleitung

Panasonic

Panasonic SiriusXM CQ-RXBT490U Bedienungsanleitung

Panasonic

Panasonic RF-SW250 Bedienungsanleitung

Panasonic

Panasonic SAXR70 - RECEIVER Bedienungsanleitung

Panasonic

Panasonic SAXR70 - RECEIVER Bedienungsanleitung

Panasonic

Panasonic SA-XR700EG Bedienungsanleitung

Panasonic

Panasonic CY-TM200N Bedienungsanleitung

Panasonic

Panasonic HDMI SA-XR700 Bedienungsanleitung

Panasonic

Panasonic HD-PLC DA-PU100 Gebrauchs- und Pflegehandbuch

Panasonic

Panasonic SHFX71 - WIRELESS SYSTEM Bedienungsanleitung

Panasonic

Panasonic SAXR25 - DIGITAL A/V RECEIVER Bedienungsanleitung

Panasonic

Panasonic SAXR58 - DIGITAL A/V RECEIVER Bedienungsanleitung

Panasonic

Panasonic TU-PT600B Bedienungsanleitung

Panasonic

Panasonic Comcast TZ-PCD3000 Bedienungsanleitung

Panasonic

Panasonic CQ-C5302W Bedienungsanleitung

Panasonic

Panasonic CF-AA Series Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung

Panasonic elite sc-91 Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken