Panasonic KV-S4085CL Bedienungsanleitung
Model No.
KV-S4085CL / KV-S4085CW
KV-S4065CL / KV-S4065CW
Installation Manual
These instructions contain information on installing the scanner. Please read this manual before installing the
unit.
For information on operating the scanner, please read the Operating Manual on the CD-ROM enclosed with this
unit.
Please carefully read this manual, and keep this documentation in a safe place for future reference.
High Speed Color Scanner
Introduction
Thank you for purchasing a Panasonic High Speed Color Scanner.
Feature Highlights
Superior Paper Feeding
•This scanner features an advance paper feeding mechanism that monitors the condition of the document
and adjusts the pressure of the rollers accordingly. As a result, this scanner can scan a wide range of paper
weights, from very thin 20 g/m² (5 lbs.) paper to very thick 209 g/m² (56 lbs.) paper.
High-speed Double Sided Scanning
•This scanner can scan documents at high speed, regardless of the resolution (200 dpi / 300 dpi) or image
type (monochrome / color).
Single sided: 80 pages/minute, double sided: 160 images/minute (KV-S4085CL / KV-S4085CW)
Single sided: 60 pages/minute, double sided: 120 images/minute (KV-S4065CL / KV-S4065CW)
* Speeds based on scanning A4 size paper in portrait orientation.
Support for High-efficiency Scanning Jobs
•This scanner has a Stapled document detection function, which can automatically detect stapled
documents and try to stop scanning before any damage is caused to the scanner.
•This scanner is equipped with 3 ultrasonic sensors that can be turn on and off independently. They are in
3 different locations (left, center and right), which can detect a variety of double feeds.
(KV-S4065CL / KV-S4065CW: 1 location)
Other Features
•You can select between the front exit and rear exit (straight path) for the paper exit path. By using the
straight path, you can scan long sheets of paper or thick sheets of paper.
•You can set the left and right document guides independently. By doing so, you can reliably scan
documents of differing paper sizes.
•The paper feed path can be opened widely to easily removed jammed paper and perform maintenance.
2 Installation Manual
Introduction
About the documentation
The scanner documentation consists of 2 manuals: the Installation Manual and the Operating Manual. In
addition, 3 software reference manuals are included.
Installation Manual
(this manual)
The Installation Manual explains the installation method and
procedures.
Operating Manual
(electronic documentation)
The Operating Manual explains the part names, operations, features
and maintenance of the unit.
Software Reference Manuals
(electronic documentation)
•PIE Reference Manual
Explains the settings of the PIE (Panasonic Image Enhancement
Technology) features using the ISIS and TWAIN drivers.
•RTIV Reference Manual
Explains the features and settings for RTIV (Reliable Throughput
Imaging Viewer). (You can view this manual by clicking the help
button on RTIV.)
•User Utility Reference Manual
Explains how to use the User Utility, which is used for scanner
maintenance. (You can view this manual by clicking the help
button on User Utility.)
•The electronic documentation is located on the included CD-ROM. For details on viewing the
documentation, see "Viewing Manuals From the CD-ROM" (page 19).
Abbreviations
•Windows® refers to the Microsoft® Windows® operating system (hereafter Windows).
•Windows® 2000 refers to the Microsoft® Windows® 2000 operating system (hereafter Windows 2000).
•Windows® XP refers to the Microsoft® Windows® XP operating system (hereafter Windows XP).
•Windows Vista® refers to the Microsoft® Windows Vista® operating system (hereafter Windows Vista).
Trademarks
•Microsoft, Windows, and Windows Vista are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
•ISIS and QuickScan Pro are registered trademarks or trademarks of EMC Corporation.
•IBM and AT are trademarks of International Business Machines Corporation in the United States, other
countries, or both.
•Intel and Intel Core are trademarks of Intel Corporation in the U.S. and other countries.
•Adobe and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the
United States and/or other countries.
•All other trademarks identified herein are the property of their respective owners.
Installation Manual 3
Introduction
International ENERGY STAR Program
As an ENERGY STAR®Partner, Panasonic has determined that this product meets
the ENERGY STAR guidelines for energy efficiency.
Federal Communications Commission Requirements (For United States
only)
Note
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
FCC Warning: To assure continued FCC compliance, the user must use only shielded interface cable and
the provided power supply cord. Also, any unauthorized changes or modifications to this equipment would
void the user’s authority to operate this device.
For FRG Users (For Germany Only)
Machine noise information regulation - 3.GPSGV, the maximum sound pressure level is 70 dB(A) or less, in
conformity with EN ISO 7779.
4 Installation Manual
Introduction
Table of Contents
Before You Start .......................................................................................6
For Your Safety .................................................................................................................6
Safety Information (For United Kingdom only) ..............................................................9
Precautions ......................................................................................................................10
Installation ..............................................................................................12
Installing the Unit ............................................................................................................12
Installing Software ..........................................................................................................16
System Requirements ....................................................................................................16
CD-ROM Contents .........................................................................................................16
Software Installation .......................................................................................................17
Uninstalling Software ......................................................................................................18
Viewing Electronic Documentation ...............................................................................19
Viewing Manuals From the CD-ROM .............................................................................19
Viewing Manuals Installed On Your Computer ...............................................................19
Uninstalling Manuals ......................................................................................................19
Appendix .................................................................................................20
Troubleshooting ..............................................................................................................20
Installation Manual 5
Table of Contents
For Your Safety
To prevent severe injury and loss of life, read this
section carefully before using the unit to ensure proper
and safe operation of your unit.
•This section explains the graphic symbols used
in this manual.
WARNING
Denotes a potential
hazard that could
result in serious
injury or death.
CAUTION
Denotes hazards
that could result in
minor injury or
damage to the unit.
These symbols are used to
alert operators to a specific
operating procedure that
must be performed
carefully.
These symbols are used to
alert operators to a specific
operating procedure that
must not be performed.
These symbols are used to
alert operators to a specific
operating procedure that
must be emphasized in
order to operate the unit
safely.
For Users
WARNING
Power and Ground Connection
The power source voltage of this unit is
listed on the nameplate.
Only plug the unit into an AC outlet with
the proper voltage.
If you use a cord with an unspecified
current rating, the unit or plug may emit
smoke or become hot to the touch.
When you operate this product, the power
outlet should be near the product and
easily accessible.
To ensure safe operation, the power cord
supplied must be inserted into a standard
three-prong AC outlet which is effectively
grounded (earthed) through the normal
wiring.
The fact that the equipment operates
satisfactorily does not imply that the
power point is grounded (earthed) and
that the installation is completely safe. For
your safety, if in any doubt about the
effective grounding (earthing) of the
power point, consult a qualified
electrician.
If the plug cannot be inserted into the AC
outlet, contact a licensed electrician to
replace the AC outlet with a properly
grounded (earthed) one.
Do not defeat the grounding (earthing)
plug (ex. do not use a conversion plug).
Plug the power cord firmly into an AC
outlet. Otherwise, it can cause fire or
electric shock.
Do not pull, bend, rest objects on, or chafe
the power cord, and plug.
Damage to the power cord or plug can
cause fire or electric shock.
6 Installation Manual
Before You Start
Before You Start
Do not attempt to repair the power cord,
or plug. If the power cord or plug is
damaged or frayed, contact an authorized
service representative for a replacement.
Ensure that the plug connection is free of
dust. In a damp environment, a
contaminated connector can draw a
significant amount of current that can
generate heat, and eventually cause fire
if left unattended over an extended period
of time.
Never touch the plug with wet hands.
Danger of electric shock exists.
Stop operation immediately if the unit
emits smoke, excessive heat, abnormal
smell, or unusual noise. These conditions
can cause fire or electric shock.
Immediately turn the unit off, and unplug
the power cord, and contact your dealer
for service.
When disconnecting the unit, grasp the
plug instead of the cord. Pulling on a cord
forcibly can damage it, and cause fire or
electric shock.
Operating Safeguards
If metal fragments or water gets into the
unit, turn the unit off, and unplug the unit
immediately. Contact your dealer for
service. Operating the contaminated unit
can cause fire or electric shock.
Do not open covers, and do not attempt to
repair the unit yourself. Contact your
dealer for service.
Do not alter the unit or modify any parts.
Alteration or modification can cause fire or
electric shock.
During thunderstorms, do not touch the
unit and plug. It may cause an electric
shock.
Do not place the separation rollers or
paper feed rollers where small children
can reach them. There is a danger that the
rollers may be swallowed. In the event
that you think they have been swallowed,
contact a doctor immediately.
Roller Cleaning Paper
Do not drink or inhale the roller cleaning
paper fluid including isopropyl alcohol.
The roller cleaning paper may be harmful
to sensitive skin. Please use protective
gloves.
Do not use the roller cleaning paper near
a heater or open flame.
CAUTION
Power
The unit should be used only with the
power cord enclosed with the unit.
When the unit is not used over an
extended period of time, switch it off, and
unplug it. If an unused unit is left
connected to a power source for a long
period, degraded insulation may cause
electric shock, current leakage, or fire.
Installation Manual 7
Before You Start
Installation and Relocation
Do not position the unit in a location where
it is unstable.
To prevent fire or shock hazard, do not
expose this unit to rain or any type of
moisture.
Do not place the unit in a hot humid or
dusty environment.
Prolonged exposure to these adverse
conditions may cause fire or electric
shock.
Do not block the air vents. Doing so can
cause heat to build up, and may result in
fire.
When moving the unit, be sure to unplug
the power cord from the AC outlet. If the
unit is moved with the power cord
attached, it can cause damage to the cord
which could result in fire or electric shock.
Do not use the hopper hanging out of a
table.
When carrying the unit, do not use the
hopper as handles.
Move this unit with two persons, and hold
it by both side grips. Dropping the unit can
cause injury and damage to the unit.
Operating Safeguards
If the unit falls down or gets damaged, turn
the unit off, and unplug the power cord.
Otherwise, it may cause fire or electric
shock.
Do not place any liquids or heavy items on
the unit.
Accidental spillage of liquid into the unit
may cause severe damage. If this occurs,
turn the unit off, unplug the power cord,
and contact your dealer for service.
Do not touch the image sensor covers or
their surroundings immediately after
continuous scanning.
This area is very hot and can cause burns.
When wiping the rollers (A) and
lower-section image sensor cover, make
sure to close the straight path tray.
Notched section A
Image sensor
cover
Straight path tray
If the straight path tray is open, touching
the notched section can cause injury.
Be careful not to pinch your fingers when
closing the front door. It can cause injury.
8 Installation Manual
Before You Start
(For KV-S4065CL and KV-S4065CW only)
LED LIGHT
DO NOT VIEW DIRECTLY WITH OPTICAL
INSTRUMENTS.
CLASS 1M LED PRODUCT
LED properties
LED radiation output: 12 mW max.
Wavelength: Red 630 nm typ.
Green 534 nm typ.
Blue 460 nm typ.
Emission duration: Continuous
Standard: IEC 60825-1:1993 +A1:1997 +A2:2001
Safety Information (For
United Kingdom only)
This appliance is supplied with a moulded three pin
mains plug for your safety and convenience.
A 5 amp fuse is fitted in this plug. Should the fuse need
to be replaced, please ensure that the replacement fuse
has a rating of 5 amps and that it is approved by ASTA
or BSI to BS1362. Check for the ASTA mark
ASA
or the
BSI mark on the body of the fuse. If the plug contains
a removable fuse cover, you must ensure that it is
refitted when the fuse is replaced. If you lose the fuse
cover, the plug must not be used until a replacement
cover is obtained. A replacement fuse cover can be
purchased from your local Panasonic Dealer.
IF THE FITTED MOULDED PLUG IS UNSUITABLE
FOR THE SOCKET OUTLET IN YOUR PREMISES,
THEN THE FUSE SHOULD BE REMOVED AND THE
PLUG CUT OFF AND DISPOSED OF SAFELY.
THERE IS DANGER OF SEVERE ELECTRICAL
SHOCK IF THE CUT-OFF PLUG IS INSERTED INTO
ANY 13 AMP SOCKET.
If a new plug is to be fitted, please observe the wiring
cord as shown below. If in any doubt, please consult a
qualified electrician.
WARNING
THIS APPLIANCE MUST BE EARTHED.
IMPORTANT
The wires in this mains lead are coloured as follows:
Green-and-Yellow : Earth
Blue : Neutral
Brown : Live
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug, proceed
as follows.
The wire that is coloured GREEN-AND-YELLOW must
be connected to the terminal in the plug that is marked
with the letter E or by the Earth symbol or coloured
GREEN or GREEN-AND-YELLOW.
The wire that is coloured BLUE must be connected to
the terminal in the plug that is marked with the letter N
or coloured BLACK.
The wire that is coloured BROWN must be connected
to the terminal in the plug which is marked with the letter
L or coloured RED.
How to replace the fuse:
Open the fuse compartment with a screwdriver and
replace the fuse and fuse cover.
Installation Manual 9
Before You Start
Precautions
Installation
•Do not place the unit in direct sunlight, in a cold
draft, or near heating apparatus.
•Do not place the unit near apparatus which
generate electronic or magnetic noise.
•Protect the unit from static electricity.
•Do not move the unit immediately from a cold place
to a warm place. It may cause dew.
CD-ROM
•Do not write or stick paper on the front and/or back
of CD-ROM.
•Do not touch the data side of the CD-ROM. When
handling the CD-ROM, be careful not to leave
fingerprints or otherwise damage the CD-ROM.
•Do not leave the CD-ROM where it is directly
exposed to sunlight or near a heater for extended
periods.
•Do not throw or bend the CD-ROM.
Roller Cleaning Paper
•Keep the roller cleaning paper out of reach of small
children.
•Do not store the roller cleaning paper in direct
sunlight or in a place with a temperature over
40
°C
(104 °F).
•Only use the roller cleaning paper to clean the
rollers and image sensor covers.
•For details about the roller cleaning paper, please
refer to the Material Safety Data Sheet (MSDS).
Please ask your Panasonic sales company about
obtaining the Material Safety Data Sheet.
KEEP AWAY FROM FIRE.
Others
•Make sure to remove paper clips and staples from
documents before scanning. Failing to do so can
damage the unit, document, or both.
•Do not use thinner, benzine, or cleaners containing
abrasives or surfactants, for cleaning the outside of
scanner.
•Plug the power cord into an outlet from which you
can easily unplug it.
10 Installation Manual
Before You Start
Andere Handbücher für KV-S4085CL
1
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere Panasonic Scanner Handbücher
Panasonic
Panasonic KV-SS080 Bedienungsanleitung
Panasonic
Panasonic KV-S1020C Bedienungsanleitung
Panasonic
Panasonic KV-S6040W - Document Scanner Bedienungsanleitung
Panasonic
Panasonic KV-S1045C Bedienungsanleitung
Panasonic
Panasonic KV-S1057C Bedienungsanleitung
Panasonic
Panasonic KV-S7097 Installations- und Betriebsanleitung
Panasonic
Panasonic KV-S1045C Bedienungsanleitung
Panasonic
Panasonic KV-S8147 Bedienungsanleitung
Panasonic
Panasonic KV-S2055L Bedienungsanleitung
Panasonic
Panasonic KV-SS50 Bedienungsanleitung
Panasonic
Panasonic KV-S3065 Bedienungsanleitung
Panasonic
Panasonic KV-S2065L Bedienungsanleitung
Panasonic
Panasonic KV-S2087 Bedienungsanleitung
Panasonic
Panasonic KV-S2028C Bedienungsanleitung
Panasonic
Panasonic KV-S2048C Bedienungsanleitung
Panasonic
Panasonic KV-SS855D Bedienungsanleitung
Panasonic
Panasonic KV-S4065CL - Sf Clr Duplex 65PPM USB 2.0 Lgl 300PG... Bedienungsanleitung
Panasonic
Panasonic KV-SS25D Bedienungsanleitung
Panasonic
Panasonic KV-S1015C Bedienungsanleitung
Panasonic
Panasonic KV-SS25D Bedienungsanleitung
