Panasonic KV-S6055W Bedienungsanleitung

ORDERNO. KM70104624C0

G14

High SpeedScanner

KV-S6055W/ KV-S6055WU/ KV-S6050W/ KV-S6050WU

1. GENERALPRECAUTIONS

1.1. SafetyPrecautions

1. Beforeservicing, unplug thepowercordtopreventelectrical

shock hazard.

2. Whenreplacing parts, use onlymanufacturer’srecommended

components forsafety.

3. Check thecondition ofpowercord. Replace ifwearorifdamageis

evident.

4. Afterservicing, besuretorestoretheleaddress, insulation

barriers, insulation papers, shields, etc.

5. Beforereturning theservicedequipmenttothecustomer, perform

thefollowing electrical tests topreventashock hazard.

1.2. Electrical Tests

1. Unplug thepowercordand check forcontinuitybetweentheearth

ground connection on theplug and themetal cabinet. There

shouldbezeroohmresistance found.

2. Withtheunitunplugged, shorttheACLive-Neutral oftheplug with

ajumperwire.

3. TurnONthepowerswitch.

4. Measuretheresistance valuewithanohmmeterbetweenthe

jumperedACplug and eachexposedmetal cabinet part, suchas

screwheads, etc.

Note:

Someexposedparts maybeisolatedfromthechassisbydesign.

Theyreadinfinity.

5. Ifthemeasurementisless than1M , apossibilityforelectric

shock mayexit.

Note:

Thishazardouscondition must becorrectedbeforetheunitis

returnedtotheend user.

1.3. ForService Technicians

ICsand LSIsarevulnerabletostaticelectricity.

Whenrepairing, thefollowing precautionswill helptopreventrecurring malfunctions.

1. Covertheplasticparts withaluminumfoil.

2. Ground thesoldering irons.

3. Use aconductivemat on theworktable.

4. DonotgraspICorLSI pinswithbarefingers.

2. SPECIFICATIONS

Item Model No.

KV-S6050W

KV-S6050WU

KV-S6055W

KV-S6055WU

Scanner Scanning face Simplex scanning Duplex scanning

Scanning method ADFfrontside/Flatbed:CCD

imagesensor

ADFfrontside/Flatbed:

CCD

imagesensor

ADFback side:CIS

(ContactTypeImage

Sensor)

Readout

speed

Flatbed 1.5sec (1paper, lettersize, 200 dpi)

ADF Simplex scanning :Approx. 55 ppm.

(Letter, fedlengthwise, 200 dpi)

Duplex scanning :Approx. 82 ipm.

(KV-S6055W(U) only)(Letter, fedlengthwise, 200 dpi)

Resolution Flatbed/

ADF

Mainscanning direction :100~600 dpi (1dpi step)

Sub-scanning direction :100~600 dpi (1dpi step)

Optical resolution is400 dpi.

Tonal gradation Binarymode, Grayscalemode(4/8bit), 64-stepgradation, (

dither)

mode, 64-stepgradation (error diffusion)mode

Imagecontrol Imageemphasis, Dynamicthreshold(DIMM required),

Automatic

threshold, Automaticseparation, Monochromereversing,

Automaticback control

Paper Sizefor

Flatbed

~298x432mm (11.7x17 in.)

Sizefor

ADF

Scanning size

70x169mm (2.8x6.7in.), and

106x148mm (4.2x5.8in.)to298x432mm (11.7x17 in.)

Feeding size

70x169mm (2.8x6.7in.), and

106x148mm (4.2x5.8in.)to305x432mm (12x17 in.)

Thickness

for ADF

Singlepaperfeeding :0.05 to0.15mm (2.0to5.9mils)

Continuouspaperfeeding :0.06 to0.15mm (2.4to5.9mils)

Note:1mil=1/1000 in.

Weight

for ADF

Singlepaperfeeding :40 to127g/m2(10.6to34 lbs.)

Continuouspaperfeeding :50 to127g/m2(13 to34 lbs.)

Interface (Transferrate) SCSI3(20MB/sec)

Hoppercapacity 200 sheets[64g/m2 (17 lbs.)un usedpaper]

Item Model No.

KV-S6050W

KV-S6050WU

KV-S6055W

KV-S6055WU

Unit External dimensions

(WidthxDepthxHeight)

464x717x296mm (18.3x28.2x11.7in.)

Mass (Weight) 30kg(66 lbs.)

Powerrequirement AC100-120V, 50/60Hz(KV-S6050W/S6055W)

AC220-240V, 50/60Hz(KV-S6050WU/S6055WU)

Power

consumption

Maximum

(Scanning)

1.8A(KV-S6050W/S6055W)/135W

1.0A(KV-S6050WU/S6055WU)/135W

Minimum

(Standby)

0.5A(KV-S6050W/S6055W)/35W

0.3A(KV-S6050WU/S6055WU)/35W

Sleep

mode

0.13A(KV-S6050W/S6055W)/11W

0.07A(KV-S6050WU/S6055WU)/11W

Operating

Environment

Operating temperature

and humidity

15°Cto30°C(59°Fto86°F), 30%to80%RH

Storage

Environment

Storagetemperature

and humidity

0°Cto35°C(32°Fto95°F), 10%to80%RH

Option Rollerexchangekit(KV-SS044), Imprinterunit(KV-SS010), Redlampoption (KV-

SS045),

Rollercleaning paper(KV-SS03), lnkcartridge(KV-SS06), Whiteroller&Cover(KV-

SS049)

“Weightinpounds”ofpaperrepresentstheweightof500 [432x559mm (17x22 inches)] sheets.

“Theredlampoption (KV-SS045)mustbeinstalledbyatrainedservice engineer.

3. COMPONENTIDENTIFICATION

4. INSTALLATION

4.1. MinimumSpace Requirements

Besuretomaintaintherecommendedspace requirementsfor properventilation.

4.2. Removing and keeping Metal Clamp

Inordertoensurethescanner’ssafetywhileitisbeing transported, itsoptical unitissecuredby

ametal clamp. Once thescannerhas beenputintheplace whereitistobeinstalled, changethe

position ofthemetal clampbyfollowing thestepsoutlinedbelow.

(1)Place thescannerissuchaway thatitsleft area protrudes byabout15cm (5.9”)from the

edgeofatable.

-Donotturnitupsidedownorstand iton its side.

-Whenplacing thescanneron atable, becareful nottoextend

beyond theedge15cm(5.9”). Otherwise, thescannermayfall.

(2)Remove themetal clampon thebottom ofthescannerfrom position (A)and attachitat

position (B) instead.

4.3. DIMM ModuleExtension

Amaximum of256 MBextendedmemorymay berequireddepending on thecombination ofthe

papersize, resolution and gray scalemode.

(For example, toscanatwo-sidedA4sizedocumentwith600 dpi, gray, etc.)

Todeterminehowmuchextendedmemoryisrequired, refertothesection 4.6.1“Additional

MemorySizeeachscanning mode(MB)”.

*RecommendedDIMM

-JEDEC-standard168pin, dual in-linememorymodule(DIMM)

-Non buffered

-Single+3.3V±0.3Vpowersupply

-Frequency/ CASLatency:100MHz/CL=2, 133MHz/CL=2, 133MHz/CL

-64MB, 128MBor256MBmaybeused.

(Reference)DIMM modulewhichhas beenevaluatedusing thisscanner

-Manufacturer:DELKINDEVICES

1. Model No.:DM168-064Y3Q488-10S2P(64MB)

2. Model No.:DM168-064Y3Q446-10S2P(64MB)

3. Model No.:DM168-128Y3Q488-10S4P(128MB)

Note:

Originally, SCSI boardhas 16MBmemoryexceptfortheabove

additional memory.

4.4. Removing SCSI Board

1)Make surethePowerisOFF.

2)Remove SCSIBoard. (See 8.4.2.)

4.5. Installing DIMM Module

InserttheDIMM moduleintotheconnector on the

SCSIinterface board atanangle[Place (1)]. Push

inthemoduleas faras itgoes. Theleversshould

lock automatically. Ifnot, pushtheleverstolock the

modulein[Place (2)].

Note:

-BesurethattheDIMM modulewill beintheproper

position and theproperside.

-Toremove theDIMM module, release thewhite

leversatbothsides oftheconnector.

4.6. Installing theSCSI Board

1)InserttheSCSIBoard intotheunitalong the

guides and pushitinfirmly.

2)SecuretheSCSIBoard withthe3screws.

3)Install thescannerdriversoftwareinyour

computeraccording totheenclosedmanuals.

4.6.1. Additional MemorySizeeachscanning mode(MB)

Simplex/4bit, 8bit

Size Resolution (dpi)

100 200 300 400 500 600

A3 0 0 64 64 64 128

A4 0 0 0 0 64 64

A5 0 0 0 0 0 64

A6 0 0 0 0 0 0

B4(JIS) 0 0 0 64 64 64

B5(JIS) 0 0 0 0 64 64

B6(JIS) 0 0 0 0 0 0

DoubleLetter 0 0 64 64 64 128

Legal 0 0 0 64 64 64

Letter 0 0 0 0 64 64

Duplex/4bit, 8bit

Size Resolution (dpi)

100 200 300 400 500 600

A3 0 0 64 64 128 256

A4 0 0 64 64 64 128

A5 0 0 0 0 64 64

A6 0 0 0 0 0 64

B4(JIS) 0 0 64 64 128 128

B5(JIS) 0 0 0 64 64 64

B6(JIS) 0 0 0 0 64 64

DoubleLetter 0 0 64 64 128 256

Legal 0 0 64 64 64 128

Letter 0 0 64 64 64 128

Simplex/Binary

Size Resolution (dpi)

100 200 300 400 500 600

A3 0 0 0 0 0 0

A4 0 0 0 0 0 0

A5 0 0 0 0 0 0

A6 0 0 0 0 0 0

B4(JIS) 0 0 0 0 0 0

B5(JIS) 0 0 0 0 0 0

B6(JIS) 0 0 0 0 0 0

DoubleLetter 0 0 0 0 0 0

Legal 0 0 0 0 0 0

Letter 0 0 0 0 0 0

Duplex/Binary

Size Resolution (dpi)

100 200 300 400 500 600

A3 0 0 0 0 0 64

A4 0 0 0 0 0 0

A5 0 0 0 0 0 0

A6 0 0 0 0 0 0

B4(JIS) 0 0 0 0 0 0

B5(JIS) 0 0 0 0 0 0

B6(JIS) 0 0 0 0 0 0

DoubleLetter 0 0 0 0 0 64

Legal 0 0 0 0 0 0

Letter 0 0 0 0 0 0

4.7. Connecting theUnittoaPersonal Computer

4.8. SystemConditionsRequirements

Whenusing thescanner, therequiredpersonal computerconditionsareas follows.

CPU Pentium 166MHzor higher(Pentium, Celeron processor or higheris

recommended.

Memory 64 MBor higher(128 MBor higherisrecommended.)

OS Windows95/Windows98/WindowsNT/Windows2000/WindowsMe

SCSIboard Adaptec Brand AHA-1540/2930/2940/19160/29160 Series are

recommended.

*Thescanning speeddiffersdepending on thepersonal computeroperating environmentor

application.

4.9. LCD Settings

Beforescanning thedocument, perform thepreferredsettingson thedisplay. Setting information

and scannerconditionsareshownon thedisplay.

4.9.1. Setting thelanguage

1. Turnthepoweron whilepressing theHOMEkey.

Note:

Thelanguagesetting modeisselectedautomaticallywhenthe

scanner’spoweristurnedon forthefirst timeafterthescanner

was purchased.

2. Use the[ ]keyor[ ]keytoselect the“EnglishLetter”,

“EnglishA4”or“DeutschA4”, “ A4”.

3. Press theHOMEkey.

-Thedisplaywill changetotheselect language, thenthe

scannerwill beready.

Andere Handbücher für KV-S6055W

Dieses Handbuch passt für folgende Modelle

Andere Panasonic Scanner Handbücher

Panasonic

Panasonic KV-S6055W Bedienungsanleitung

Panasonic

Panasonic KV-S3065CL - Document Scanner Bedienungsanleitung

Panasonic

Panasonic KV-S2055L Bedienungsanleitung

Panasonic

Panasonic KV-S2087 Bedienungsanleitung

Panasonic

Panasonic Workio KV-S7065C Bedienungsanleitung

Panasonic

Panasonic KV-SS25D Bedienungsanleitung

Panasonic

Panasonic KV-S6040W - Document Scanner Bedienungsanleitung

Panasonic

Panasonic KV-Sl3066 Bedienungsanleitung

Panasonic

Panasonic KV-SS855D Bedienungsanleitung

Panasonic

Panasonic KV-S1045C Bedienungsanleitung

Panasonic

Panasonic KV-S2048C Bedienungsanleitung

Panasonic

Panasonic KV-S3065 Bedienungsanleitung

Panasonic

Panasonic KV-S4085CW - Document Scanner Bedienungsanleitung

Panasonic

Panasonic KX-S300 Bedienungsanleitung

Panasonic

Panasonic KV-S5078Y Bedienungsanleitung

Panasonic

Panasonic KV-S1027C Betriebsanleitung

Panasonic

Panasonic KV-S1065C Bedienungsanleitung

Panasonic

Panasonic KV-S1057C Bedienungsanleitung

Panasonic

Panasonic KV-S3085 Bedienungsanleitung

Panasonic

Panasonic KV-S5055C Bedienungsanleitung

Panasonic

Panasonic KV-S4085CL Bedienungsanleitung

Panasonic

Panasonic KV-S1015C Bedienungsanleitung

Panasonic

Panasonic KV-S1065C Bedienungsanleitung

Panasonic

Panasonic KV-S5055C Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Plustek

Plustek Scanner Bedienungsanleitung

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung