Panasonic GPMF622 - MACHINE VISION CAMER Bedienungsanleitung
Switch 1 Shutter Latch
2 3 4 5 Speed off on
off off off off off 1/2,000 1/2,000
on off off off 1/100 1/2,000 1/2,000
off on off off 1/500 1/2,000 1/2,000
on on off off 1/1,000 1/2,000 1/2,000
off off on off 1/2,000 1/2,000 1/2,000
on off on off 1/4,000 1/4,000 1/4,000
off on on off 1/8,000 1/8,000 1/10,000
on on on off 1/16,000 1/16,000 1/30,000
off off off on 1/32,000 1/32,000 1/30,000
on off off on 1/64,000 1/64,000 1/30,000
off on off on 1/96,000 1/96,000 1/30,000
Other Combinations
Not Specified Not Specified Not Specified
Reset Time
image scanning start
Reset Time
image scanning start
* Max 1H = 63.5 µsec delay occur to
start video scanning after reset.
Data error can occur due to delay
(HD pulse can be conditious)
catch all data on high speed
moving object.
No delay after reset.
(HD pulse can be conditious)
* Image scanning starts quickly
after reset. 1H=0.5 µsec fixed
Delay=0
Machine Vision B/W CCD Camera
GP-MF622
Super-Reset Shutter Trigger Functions
Current
Super-Reset
Wave length (nm)
1.0
400 600 800 12001000
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
Wave length (nm)
1.0
400 500 600 700 800 900 1000
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
CCD IR FILTER
Relative Response
Relative Response
The shutter speed can be set as below
MV camera with "Super Reset", lightweight and Ultra-
compact unit enables high speed electronic shutter speed of
up to 1/96,000-sec for capturing fast-moving objects.
R
Application
•Any inspection on high speed Production
•FA / Robots
•Image Processing
•SMT / wafer / PCB inspection
Key Features
•Newly developed Super-Reset Shutter Trigger functions built in.
•Dimensions: 29 mm (width) x 29 mm (height) x 65 mm (length)
(w/o I/O connectors). Ultra-Compact and lightweight.
•Variable electronic shutter speed:
1/60, 1/100, 1/500, 1/1,000, 1/2,000, 1/4,000, 1/8,000, 1/16,000,
1/32,000, 1/64,000, 1/96,000 sec.
•
Long lens mount base design that allows wide range of lens selection.
•Equipped two (2) Video output terminals.
•570 line horizontal resolution.
•Selectable field / frame integration
•1.0 lx minimum scene illumination at F1.4.
•56 dB signal-to-noise ratio.
•C-mount
•Removable IR-cut filter.
•Designed to withstand strong Vibration / Shock resistant.
Spectral Response
Comes with
"Super Reset" functions.
Comes with
"Super Reset" functions.
• Weights and dimensions are approximate. • Specifications are subject to change without notice. • These products may be subject to export control regulations.
Printed in Japan
[P-454]
A Division of Panasonic Broadcast & Television Systems Company
A Unit of Matsushita Electric Corporation of America
Executive Office: 50 Meddowlands Pkwy 4D-4, Secaucus, New Jersey 07094 (201) 392-6674
PANASONIC CANADA INC.
5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905) 624-5010
PANASONIC SALES COMPANY
DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO, INC.
San Gabriel Industrial Park 65th Infantry Ave. KM. 9.5 Carolina, P.R. 00630 (809) 750-4300
Medical & Industrial Video Company
DISTRIBUTED BY:
Pick-up Device Interline Transfer type CCD with 768 (H) x 494 (V) pixels.
Image Size 1/2” (7.95 (H) x 6.45 (V) mm)
2 : 1 interlace 1-line interlace (Frame accumulation)
2 : 1 interlace 2-line interlace (Field accumulation)
Synchronization Internal or External (Selectable Automatically)
Internal : Built-in sync generator
External : 4.0 V[p-p]/75 ohms Horizontal drive and Vertical drive pulses
for 2 : 1 interlace
External Reset External signal (4.0 V[p-p]/75 ohms, negative) supplied to EXT VD IN
connector can be used as reset signal
Horizontal Resolution 570 lines at center
Minimum Illumination 1.0 lx (0.1 foot-candles),
(F1.4, Manual Gain Max (+6 dB), 2 : 1 interlace, without shutter)
Signal to Noise Ratio 56 dB Typical (Manual Gain Off (0 dB), 2 : 1 interlace without shutter)
Gamma 1.0
Gain Selection 0 - 6 dB, (Adjustable by Manual Gain Control on rear panel)
Electronic Shutter 10-step (1/100 s to 1/96 000 s) at normal
7-step (1/2 000 s to 1/96 000 s) at Shutter Trigger Mode (Latch Off)
4-step (1/2 000 s to1/30 000 s) at Shutter Trigger Mode (Latch On)
Lens Mount C-Mount
Vibration Resistance 10 G (10 Hz - 150 Hz) (2 hours each for three axes)
Shock Resistance 80 G (IEC 68) *IEC=International Electronical Technical Commission
Power Source DC + 12 V, 170 mA
Ambient Temperature -10˚C - +50˚C (14˚F - 122˚F)
Dimensions 29 (W) x 29 (H) x 65 (D) mm [1-1/8" (W) x 1-1/8" (H) x 2-9/16" (D)]
Weight 86 g(0.19 lbs.) (Camera Only)
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
1-1/8" (29)
1-1/8" (29)
3-1/16" (77.8)
Lens optional
2-9/16" (65)
5/16" (8)
7/16" (11.5) 1-3/4" (44.5)
6-M3
13/16" (20)
SPECIFICATIONS
APPEARANCE
OPTIONAL ACCESSORIES
Camera Cable
GP-CA34 Camera Cable
GP-CA33
Unit: inches (mm)
Video Monitor
Camera GP-CA34 Coaxial Cable
Coaxial Cable
HD/C SYNC IN
12V DC
Power Supply
VD/V reset/V cont IN
OUTIN 75Ω
Hi-Z
VIDEO
622
SYSTEM CONNECTIONS
Internal
synchronization
SW2-1:off SW2-4:off
SW2-2:off SW2-5:on
SW2-3:off SW2-6:on
HD/VD External
synchronization
SW2-1:off SW2-4:off
SW2-2:off SW2-5:
SW2-3:off SW2-6:
HD/Vreset External
synchronization
SW2-1:on SW2-4:off
SW2-2:off SW2-5:
SW2-3: SW2-6:
HD/Vcont External
synchronization
SW2-1:off SW2-4:on
SW2-2:on SW2-5:
SW2-3: SW2-6:off
HD/VD Input impedance
75Ωoff
SW2-5:off SW2-6:off
HD/VD Input impedance
75Ωoff
SW2-5:off SW2-6:off
HD Input impedance
75Ωoff
SW2-5:off
HD/VD Input impedance
75Ωon
SW2-5:on SW2-6:on
HD/VD Input impedance
75Ωon
SW2-5:on SW2-6:on
HD Input impedance
75Ωon
SW2-5:on
Vrest
Latch off Latch on
SW2-3:off SW2-3:on
Vrest
Latch off only
SW2-3:off only
Internal
synchronization External
synchronization
start
Synchronization
Field / Frame integration select
SW1-1: on Field integration
SW1-1: off Frame integration
or or or
FUNCTION SWITCH SPECIFICATION
Right Side View
Left Side View
Rear View
123456
SW2
SW1
Rear View
VR3
BNC
VR5 12pin Conector
SW2
1: Synchronization 1
2: Synchronization 2
3: Vrst Latch OFF/ON
4: Vcont DC OFF/ON
5: HD 75ΩOFF/ON
6: VD 75ΩOFF/ON
SW1
1: Field / Frame
2: Electronic shutter D0
3: Electronic shutter D1
4: Electronic shutter D2
5: Electronic shutter D3
6: Not used
VR3: Pedestal Control
VR5: Manual Gain Control
BNC Conector: Video out 2
Camera Connector (12-pin)
HR10A10R12PB
Pin No. Description
1 Ground
2 +12V IN
3 Ground for Video Out
4 Video Out
5 Ground for HD
6 HD/C SYNC IN
7 VD/V reset/V cont IN
8 Ground
9 No connection
10 No connection
11 No connection
12 Ground for VD
Actual size Actual size
Andere Handbücher für GPMF622 - MACHINE VISION CAMER
3
Inhaltsverzeichnis
Andere Panasonic Sicherheitskamera Handbücher
Panasonic
Panasonic WV-SF438 Bedienungsanleitung
Panasonic
Panasonic GP-KS1000E Bedienungsanleitung
Panasonic
Panasonic WVBP120 - CCTV CAMERA Bedienungsanleitung
Panasonic
Panasonic AKHC910 - 1080I CAMERA Bedienungsanleitung
Panasonic
Panasonic K-EF134L01E Bedienungsanleitung
Panasonic
Panasonic WV-CF212E Series Bedienungsanleitung
Panasonic
Panasonic KX-HNC600 Bedienungsanleitung
Panasonic
Panasonic OneHome KX-HCM110A Bedienungsanleitung
Panasonic
Panasonic WV-SF135 Bedienungsanleitung
Panasonic
Panasonic WVNM100 - NETWORK COLOR CAMERA Bedienungsanleitung
Panasonic
Panasonic WV-SPN531 Betriebsanleitung
Panasonic
Panasonic WV-CF224 Bedienungsanleitung
Panasonic
Panasonic WV-CW590G Bedienungsanleitung
Panasonic
Panasonic WV-SF138 Installations- und Betriebshandbuch
Panasonic
Panasonic Super Dynamic III WV-CW960 Bedienungsanleitung
Panasonic
Panasonic WV-SC385 Bedienungsanleitung
Panasonic
Panasonic WVBF102 - CCTV CAMERA Bedienungsanleitung
Panasonic
Panasonic WV-BF320 Bedienungsanleitung
Panasonic
Panasonic BB-HCM371A - Outdoor Wireless Network Camera Bedienungsanleitung
Panasonic
Panasonic KX-HCM270 Bedienungsanleitung
