Panasonic WV-CZ392E: WV-CZ492E Bedienungsanleitung

Operating Instructions

Color CCTV Camera

Model No. WV-CZ392E

WV-CZ492E

Before attempting to connect or operate this product,

please read these instructions carefully and save this manual for future use.

The model number is abbreviated in some descriptions in this manual.

This illustration represents WV-CZ392E.

Wij verklaren als enige aansprakelijke, dat het

product waarop deze verklaring betrekking heeft,

voldoet aan de volgende normen of andere

normatieve documenten, overeenkomstig de

bepalingen van Richtlijnen 2006/95/EC en

2004/108/EC.

Vi erklærer os eneansvarlige for, at dette produkt,

som denne deklaration omhandler, er i

overensstemmelse med standarder eller andre

normative dokumenter i følge bestemmelserne i

direktivene 2006/95/EC og 2004/108/EC.

Vi deklarerar härmed vårt fulla ansvar för att den

produkt till vilken denna deklaration hänvisar är i

överensstämmelse med de standarder eller andra

normativa dokument som framställs i direktiv nr

2006/95/EC och 2004/108/EC.

Ilmoitamme yksinomaisella vastuullamme, että

tuote, jota tämä ilmoitus koskee, noudattaa

seuraavia standardeja tai muita ohjeellisia

asiakirjoja, jotka noudattavat direktiivien 2006/95/

EC ja 2004/108/EC säädöksiä.

Vi erklærer oss alene ansvarlige for at produktet

som denne erklæringen gjelder for, er i

overensstemmelse med følgende normer eller andre

normgivende dokumenter som følger

bestemmelsene i direktivene 2006/95/EC og

2004/108/EC.

We declare under our sole responsibility that the

product to which this declaration relates is in

conformity with the standards or other normative

documents following the provisions of Directives

2006/95/EC and 2004/108/EC.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC

SHOCK DO NOT OPEN

The lightning flash with arrowhead

symbol, within an equilateral

triangle, is intended to alert the

user to the presence of uninsulated

dangerous voltage within the

products enclosure that may be of

sufficient magnitude to constitute a

risk of electric shock to persons.

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

of important operating and

maintenance (servicing)

instructions in the literature

accompanying the appliance.

Note:

• The serial number of this product may be

found on the rear of the unit. You should

note the serial number of this unit in the

space provided and retain this book as a

permanent record of your purchase to aid

identification in the event of theft.

Contents

Important safety instructions ............................................................................................................ 4

Limitation of liability .......................................................................................................................... 5

Disclaimer of warranty...................................................................................................................... 5

Preface ............................................................................................................................................. 6

About notations ................................................................................................................................ 6

Features............................................................................................................................................ 6

About the user manuals ................................................................................................................... 6

Precautions....................................................................................................................................... 7

Precautions for installation ............................................................................................................... 9

Major operating controls .................................................................................................................. 11

Installation and connection .............................................................................................................. 12

Basic operation ................................................................................................................................ 17

Setup menu ...................................................................................................................................... 18

Advanced operation......................................................................................................................... 21



Quick setup menu ...................................................................................................................... 21



Advanced setup menu ............................................................................................................... 21



Camera setting ........................................................................................................................... 21



Preset position setting ................................................................................................................ 29



Special setting............................................................................................................................ 32



Communication setting............................................................................................................... 33



Using the scene select setting menu

.......................................................................................... 34



Language setting ....................................................................................................................... 35



Quick setup ................................................................................................................................ 35



Password lock setting ................................................................................................................ 35

Troubleshooting................................................................................................................................ 37

Speciﬁcations................................................................................................................................... 38

Standard accessories ...................................................................................................................... 39

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer's

instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including ampliﬁers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized

plug has two blades with one wider than the other. A grounding type plug has two

blades and a third grounding prong. The wide blade or the third prong are provided for

your safety. If the provided plug does not ﬁt into your outlet, consult an electrician for

replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories speciﬁed by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,

or sold with the apparatus. When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14)

Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate normally, or has been dropped.

Important safety instructions

S3125A

Limitation of liability

Disclaimer of warranty

THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER

EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT

OF THE THIRD PARTY'S RIGHT.

THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL

ERRORS. CHANGES ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE

IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S).

IN NO EVENT SHALL Panasonic System Networks Co., Ltd. BE LIABLE TO ANY PARTY OR

ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE

PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW:

(1) ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT,

SPECIAL, CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO

THE PRODUCT;

(2) PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE USE OR

NEGLIGENT OPERATION OF THE USER;

(3) UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION OF THE PRODUCT BY

THE USER;

(4) INCONVENIENCE OR ANY LOSS ARISING WHEN IMAGES ARE NOT DISPLAYED,

DUE TO ANY REASON OR CAUSE INCLUDING ANY FAILURE OR PROBLEM OF THE

PRODUCT;

(5) ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE,

ARISING OUT OF THE SYSTEM COMBINED BY THE DEVICES OF THIRD PARTY;

(6) ANY CLAIM OR ACTION FOR DAMAGES, BROUGHT BY ANY PERSON OR

ORGANIZATION BEING A PHOTOGENIC SUBJECT, DUE TO VIOLATION OF PRIVACY

WITH THE RESULT OF THAT SURVEILLANCE-CAMERA'S PICTURE, INCLUDING SAVED

DATA, FOR SOME REASON, BECOMES PUBLIC OR IS USED FOR ANY PURPOSE.

This product is a 1/4 type CCD color CCTV camera. Connection of this product to a video

monitor allows users to use this product as a monitoring camera.

• WV-CZ392: 36x zoom

• WV-CZ492: 36x zoom, Super Dynamic 6

The following notations are used when describing the functions limited for speciﬁed models.

The functions without the notations are supported by all models.

CZ392 The functions with this notation are available when using the model WV-CZ392.

CZ492 The functions with this notation are available when using the model WV-CZ492.

Preface

About notations

Features

About the user manuals

• High quality picture of 976 x 582 pixels

• Minimum illumination of 0.5 lx for color mode

• Minimum illumination of 0.04 lx for black-and-white mode

• Privacy zone feature enables users to veil unwanted zones

• Protocol adaptability to Panasonic's protocol

• Auto Day/Night mode enables the camera to switch between color and black-and-white

in response to input lights

• Built-in digital motion detector and alarm outputs

• Super Dynamic 6 can capture clear images of subjects whose illumination is extremely

different CZ492

• Up to 256 preset position

• Sync is available from internal

• Automatic gain control circuit

• Image hold

• Digital noise reduction effect

• Setting change executable only by authorized personnel thanks to the password lock

function

• Enhanced horizontal resolution by resolution setting

The illustrations and screens used in these operating instructions show the case of WV-CZ392.

Precautions

The following points as well as the contents of

"Warning" and "Caution" shall be observed.

Refer installation work to the dealer.

Installation work requires technique and

experiences. Otherwise injury, or damage to

this product may result.

Be sure to consult the dealer.

Do not insert any foreign objects.

This could permanetly damage this product.

Turn the power off immediately and contact

qualiﬁed service personnel for service.

Do not attempt to disassemble or modify

this product.

Failure to observe this may cause fire or

electric shock.

Consult the dealer for the repair or inspections.

Stop operation immediately when

something is wrong with this product.

When smoke goes up from this product or

the smell of smoke comes from this product,

continued use will result in fire, injury, or

damage to the product.

Turn the power off immediately and contact

qualiﬁed service personnel for service.

Select an installation area that can

support the total weight.

Selecting an inappropriate installation

surface may cause the product to fall down

or topple over, resulting in injury.

Installation work shall be started after

sufﬁcient reinforcement.

Periodic inspections shall be conducted.

Rust on the metal parts or screws may cause

the product to fall down resulting in injury or

accidents.

Consult the dealer for the inspections.

This product shall be installed in a

vibration-free place.

Failure to observe this may cause screws

and bolts to be loosened and consequently

to fall resulting in injury.

Install this product high enough to ensure

that people don't hit their heads.

Failure to observe this may cause a drop

resulting in injury or accidents.

Do not strike or give a strong shock to

this product.

Failure to observe this may cause injury or ﬁre.

Turn the power off when do wiring of this

product.

Failure to observe this may cause electric

shock. A short circuit or wrong wiring may

cause ﬁre.

Do not use this product in an atmosphere

of ammable gases.

Failure to observe this may cause injury by

explosion.

Avoid installing this product in locations

where it is subject to damage by salt or

corrosive gas.

Otherwise the mounting fixtures will

deteriorate, causing the product to fall down

and leading to accidents.

Tighten screws and mounting xtures to

the specied torque.

Failure to observe this may cause a drop

resulting in injury or accidents.

[Precautions for use]

This product is designed to be used

indoors.

This product is not operable outdoors.

This product has no power switch.

When turning off the power, turn off a circuit

breaker.

To keep on using with stable performance

Parts of this product may deteriorate and it

may shorten the lifetime of this product when

using in locations subject to high temperatures

and high humidity. (Recommended operating

temperature: +35 °C {95 °F} or lower)

Do not expose this product to direct heat

sources such as a heater.

Handle this product with care.

Do not drop this product, nor apply shock or

vibration to this product.

Failure to observe this may cause trouble.

Discoloration on the CCD color lter

When continuously shooting a bright light

source such as a spotlight, the color filter

of the CCD may have deteriorated and

it may cause discoloration. Even when

changing the fixed shooting direction after

continuously shooting a spotlight for a

certain period, the discoloration may remain.

Do not aim this product at strong light

sources.

A light source such as a spot light causes a

blooming (light bleeding) or a smear (vertical

lines).

Cleaning this product body

Turn the power off when cleaning this

product. Do not use strong abrasive

detergent when cleaning this product.

Otherwise, it may cause discoloration.

Synchronous mode setting

Image synchronous mode of this camera

indicates internal synchronization (INT) only.

Set the multiplex vertical driver (VD2) as OFF

when the camera is connected to the system

controller of the company.

Blooming

Smear Bright subject

Precautions for installation

Avoid installing this product in the follow-

ing locations.

• Location where it may get wet from rain or

water splash.

• Locations where a chemical agent is

used such as a swimming pool.

• Locations subject to steam and oil

smoke such as a kitchen, Locations near

ﬂammable gas or vapor.

• Locations where radiation or x-ray

emissions are produced.

• Locations where corrosive gas is

produced, Locations where it may be

damaged by briny air such as seashores.

• Locations where the temperature is not

within –10 °C to +50 °C.

• Locations subject to vibrations (This

product is not designed for on-vehicle

use.)

Avoid moist or dusty places to install this

system.

Otherwise, lifetime of the internal parts may

be shortened.

Avoid installing this product in a place

with a high level of noise.

Installation near an air conditioner, an air

cleaner, a vending machine, or the like

causes noise.

Be sure to remove this product if it is not

in use.

Keep the camera cable away from the

lighting cable.

Failure to observe this may cause noise.

The following points as well as the

contents of "Warning" and "Caution"

shall be observed.

Panasonic assumes no responsibility

for injuries or property damage resulting

from failures arising out of improper

installation or operation inconsistent with

this documentation.

Installation work shall be performed in

accordance with the technology standard

of the electric installation.

This product is designed to be used

indoors.

This product is not operable outdoors.

Do not expose the product to direct sunlight

for hours and do not install the product near

a heater or an air conditioner. Otherwise, it

may cause deformation, discoloration and

malfunction. Keep the product away from

water and moisture.

Installing place

Contact your dealer for assistance if you

are unsure of an appropriate place in your

particular environment.

• Make sure that the installation area is

strong enough to hold the product, such

as a concrete ceiling.

• Install the camera in the foundation area

of the architecture or where sufﬁcient

strength is assured.

• If a ceiling board such as plaster board is

too weak to support the total weight, the

area shall be sufﬁciently reinforced.

Radio interference

When the camera is used near TV/radio

antenna, strong electric field or magnetic

ﬁeld (near a motor or a transformer), images

may be distorted and noise sound may be

produced. In such a case, run the camera

cable through specialized steel conduit

tubes.

Locally procure the screws

Screws are not supplied with this product.

Prepare the screws according to the

material, structure, strength and other factors

of the mounting area and the total weight of

objects to be mounted.

Screw tightening

• The screws and bolts must be tightened

with an appropriate tightening torque

according to the material and strength of

the installation area.

• Do not use an impact driver. Failure to

observe this may cause overtightening

and consequently damage to the screws.

• When a screw is tightened, make the

screw at a right angle to the surface. After

tightening the screws or bolts, perform

visual check to ensure tightening is

enough and there is no backlash.

Inhaltsverzeichnis

Andere Panasonic Sicherheitskamera Handbücher

Panasonic

Panasonic AW-HE120KE Bedienungsanleitung

Panasonic

Panasonic GPUS522CUA - IND CCD CAMERA Bedienungsanleitung

Panasonic

Panasonic WV-NP240 series Bedienungsanleitung

Panasonic

Panasonic BB-HCM311 Betriebsanleitung

Panasonic

Panasonic BL-C160 Bedienungsanleitung

Panasonic

Panasonic WV-SUD638 Bedienungsanleitung

Panasonic

Panasonic WV-S4550L Betriebsanleitung

Panasonic

Panasonic BB-HCM580A Bedienungsanleitung

Panasonic

Panasonic KX-HNC200AZ Bedienungsanleitung

Panasonic

Panasonic KX-HCM250 Bedienungsanleitung

Panasonic

Panasonic WV-SUD638 Betriebsanleitung

Panasonic

Panasonic WV-SF135 Bedienungsanleitung

Panasonic

Panasonic BL-C111A - Network Camera - Pan Bedienungsanleitung

Panasonic

Panasonic WV-CP300 Series Bedienungsanleitung

Panasonic

Panasonic BB-HCM527CE Bedienungsanleitung

Panasonic

Panasonic i-Pro WV-SP306 Bedienungsanleitung

Panasonic

Panasonic BB-HCM531 Betriebsanleitung

Panasonic

Panasonic WV-SP305 Bedienungsanleitung

Panasonic

Panasonic WV-SW395 Bedienungsanleitung

Panasonic

Panasonic BB-HCM381A - Network Camera Bedienungsanleitung

Panasonic

Panasonic WVBP120 - CCTV CAMERA Bedienungsanleitung

Panasonic

Panasonic Super Dynamic III WV-CW960 Bedienungsanleitung

Panasonic

Panasonic GP-US932CA Bedienungsanleitung

Panasonic

Panasonic WV-SW395 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung