Panasonic BL-WV10A Bedienungsanleitung

Setup Guide

Wireless Camera Monitoring System

Model No. BL-WV10A

This guide will help you install and configure the BL-WV10A Wireless Camera Monitoring System and your

Network Cameras (sold separately).

Included Items

Confirm that the following items are included in the product box.

Additional pieces can be ordered by calling 1-800-332-5368.

BL-WV10A

AC adaptor

Part no. PQLV202Y

Cord length: 1.8 m (6 ft.)

AC cord

Part no. PSJA1069Z

Length: 55 cm (1 ft. 10

in.)

Ethernet cable

Part no. PQJA10138Z

(Cat. 5 straight cable)

Length: 1 m (3 ft. 3 in.)

Video cable

Part no.

Length: PSJP01R02Z

Stand

Part no. PSYLWV10N

Remote control

Part no. EUR648057

Batteries (2 AA size)

Part no. R6PNB/2ST

- Operating Instructions

- Warranty

Recommended Accessories (sold separately)

Compatible router: Panasonic BB-HGW700A Network Camera Management System

Compatible Network Cameras*: Panasonic BL-C10A, BL-C30A (firmware version 1.20 or higher**)

* Cameras not listed here (including other Panasonic Network Cameras) may not be compatible with this

product.

** For the latest firmware, visit http://panasonic.co.jp/pcc/products/hnetwk/support/

Setup Guide

Setup Overview

1. Insert the batteries in the remote control.

2. Connect the BL-WV10A to the power outlet and to the TV.

3. Use the BL-WV10A’s Basic Setup utility to configure the BL-WV10A.

4. Connect the cameras (and an optional BB-HGW700A Network Camera Management System, if you are

using one).

5. Use the BL-WV10A’s Quick Setup utility to configure the cameras .

6. Confirm that camera images are viewable on the TV.

7. Place the cameras where you plan to use them.

Preparing the Remote Control

The remote control included with the BL-WV10A is required for most operations.

Insert the included batteries as shown below.

Using the Remote Control

The remote control’s navigator keys are used to

navigate through the BL-WV10A’s on-screen menus

and to select on-screen items. The [RETURN] button

is used to return to the previous menu. The [ENTER]

button is used to select a menu item or parameter.

[RETURN]

Navigator keys

[ENTER]

When using the remote control with the BL-WV10A,

make sure you aim the remote control toward the

unit’s remote control sensor.

Remote control sensor

Setup Guide

Connecting the BL-WV10A

There are 2 ways to connect your cameras to the BL-WV10A. Determine which method you will use, and refer

to the pages in this manual listed below.

Using the BL-WV10A only. Using an optional BB-HGW700A .

BL-WV10A

Internet

BL-BR30A

BL-WV10A

Setup Guide

Using the BL-WV10A Only

Connecting Cameras Using the BL-WV10A Only

1. Connect the BL-WV10A to your TV using the included video cable.

2. Turn the TV on and set the TV’s input switch to the external video input (“VIDEO”, “EXT”, “INPUT 1”, etc.)

3. Set the mode switch on the rear of the BL-WV10A to [SETUP].

4. Connect the DC cord to the AC adaptor and to the power outlet.

5. Turn on the BL-WV10A by connecting the DC cord to the unit.

• The startup screen appears on the TV screen.

6. Use an Ethernet cable to connect the camera to one of the LAN jacks on the BL-WV10A.

• If connecting a BL-C30A, set the camera’s mode switch to [WIRED].

7. Connect the camera to the power outlet.

Setup Guide

Basic Setup

After the BL-WV10A starts up for the first time, the [Basic Setup] screen is displayed. For most installations,

these parameters do not need to be changed. For information regarding Basic Setup settings, see page xx in

the Operating Instructions.

1. Use the navigator keys to select [Finished], then press [ENTER].

2. When the dialog is displayed, select [Yes] then press [ENTER] to start Quick Setup.

• The BL-WV10A restarts.

Setup Guide

Quick Setup

To use the BL-WV10A with your cameras, you will need to configure the BL-WV10A and your cameras. The

BL-WV10A’s Quick Setup utility can help you configure the devices easily.

1. After the unit restarts, wait while the Quick Setup utility scans for network and wireless settings.

• When the BL-WV10A has been configured, “Finished” is displayed and the buzzer sounds.

• With this connection setup, it is normal for no router or wireless router to be found.

2. Wait while the Quick Setup utility restarts the camera, then configures and registers the camera.

→

• When the camera has been configured and registered, “Finished” is displayed next to the camera

name (“CAM1”) and the buzzer sounds.

3. To register another camera, connect the camera to one of the LAN jacks of the BL-WV10A, then turn the

camera on by connecting it to the power outlet.

To finish, set the BL-WV10A’s mode switch to [NORMAL], disconnect the DC cord from the rear of the

unit, reconnect the DC cord, then continue from “Viewing Camera Images” on page xx.

Setup Guide

Using an Optional BB-HGW700A

Connecting Cameras Using the BB-HGW700A

1. Connect the BL-WV10A to your TV using the included video cable.

2. Turn the TV on and set the TV’s input switch to the external video input (“VIDEO”, “EXT”, “INPUT 1”, etc.)

3. Set the mode switch on the rear of the BL-WV10A to [SETUP].

4. Connect the DC cord to the AC adaptor and to the power outlet.

5. Turn on the BL-WV10A by connecting the DC cord to the unit.

• The startup screen appears on the TV screen.

6. Use an Ethernet cable to connect the BB-HGW700A to one of the LAN jacks on the BL-WV10A.

7. Connect the BB-HGW700A to the power outlet.

Setup Guide

Basic Setup

After the BL-WV10A starts up for the first time, the [Basic Setup] screen is displayed. Here you can set the

administrator user name and password. For most installations, other parameters do not need to be changed.

For information regarding Basic Setup settings, see page xx in the Operating Instructions.

1. Press [ENTER], use the navigator keys to select [Admin. User Name], then press [ENTER].

2. Enter an administrator user name (6 or more characters and/or digits), the press [STOP] to save the

setting.

3. Select [Admin. Password], then press [ENTER].

4. Enter an administrator password (6 or more characters and/or digits), the press [STOP] to save the

setting.

• For instructions on entering characters using the remote control, see page xx.

5. Press [RETURN] to return to the top menu, use the navigator keys to select [Finished], then press

[ENTER].

Setup Guide

6. When the dialog is displayed, select [Yes] then press [ENTER] to start Quick Setup.

• The BL-WV10A restarts.

Quick Setup

To use the BL-WV10A with your cameras and the BB-HGW700A, you will need to configure the BL-WV10A

and each device. The BL-WV10A’s Quick Setup utility can help you configure the devices easily.

1. After the unit restarts, wait while the Quick Setup utility scans for network and wireless settings.

• When the BL-WV10A and BB-HGW700A have been configured, “Finished” is displayed and the

buzzer sounds.

2. Use an Ethernet cable to connect the camera to one of the LAN jacks on the BL-WV10A or to one of the

LAN jacks on the BB-HGW700A.

3. Connect the camera to the power outlet.

4. Wait while the Quick Setup utility restarts the camera, then configures and registers the camera.

• When the camera has been configured and registered, “Finished” is displayed next to the camera

name (“CAM1”) and the buzzer sounds.

5. To register another camera, connect the camera to one of the LAN jacks of the BL-WV10A or the

Setup Guide

BB-HGW700A, then turn the camera on by connecting it to the power outlet.

6. Before placing the cameras and the BB-HGW700A where you plan to use them, disconnect the Ethernet

cables and AC plugs from any cameras you plan to use wirelessly, and from the BB-HGW700A if you

plan to use it wirelessly.

• If connecting a BL-C30A wirelessly, set the camera’s mode switch to [WIRELESS].

7. Without connecting the Ethernet cables, turn on the cameras and BB-HGW700A again.

8. To finish, set the BL-WV10A’s mode switch to [NORMAL], disconnect the DC cord from the rear of the

unit, reconnect the DC cord, then continue from “Viewing Camera Images” on page xx. If images can be

viewed from all cameras, disconnect devices as necessary and place them where you plan to use them.

Andere Handbücher für BL-WV10A

Inhaltsverzeichnis

Andere Panasonic Sicherheitssystem Handbücher

Panasonic

Panasonic External Presentation unit 1728 Stücklistenhandbuch

Panasonic

Panasonic A02-ACAM3KIT Bedienungsanleitung

Panasonic

Panasonic KX-HNS105AZ Bedienungsanleitung

Panasonic

Panasonic BB-HGW700A - Network Camera Router Bedienungsanleitung

Panasonic

Panasonic EBL128 Bedienungsanleitung

Panasonic

Panasonic WV-PB5564E Bedienungsanleitung

Panasonic

Panasonic VL-GC001A Betriebsanleitung

Panasonic

Panasonic BL-WV10 Bedienungsanleitung

Panasonic

Panasonic External Presentation unit 1728 Stücklistenhandbuch

Panasonic

Panasonic KX-HGW600 Bedienungsanleitung

Panasonic

Panasonic PT56SX30B - 56" PROJECTION TV Bedienungsanleitung

Panasonic

Panasonic KX-HNS105 Bedienungsanleitung

Panasonic

Panasonic WVCP230 - CCD 120V Bedienungsanleitung

Panasonic

Panasonic 2000 Bedienungsanleitung

Panasonic

Panasonic WV-CW4C Bedienungsanleitung

Panasonic

Panasonic KX-HNS101 Bedienungsanleitung

Panasonic

Panasonic WJ-ND300A/10000V Service-Handbuch

Panasonic

Panasonic WJ-ND400/1000 Service-Handbuch

Panasonic

Panasonic BL-WV10 Bedienungsanleitung

Panasonic

Panasonic WJ-HDE400 Bedienungsanleitung

Panasonic

Panasonic WV-AS710 Bedienungsanleitung

Panasonic

Panasonic Arbitrator-CP Bedienungsanleitung

Panasonic

Panasonic WV-ASC970 Bedienungsanleitung

Panasonic

Panasonic WV-SC386 Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung

DSC

DSC PC 4010 Betriebsanleitung

UniPOS

UniPOS 6202L Bedienungsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Rondish

Rondish Nexus Bedienungsanleitung