Panasonic VIDEOLARM PCF5 Merkblatt

PRODUCT INSTRUCTIONS

Manufactured by:

for

Before attempting to connect or operate this product, please read these instructions completely.

81-IN3050-9922

STANDARD INSTALLATION PROCEDURE

INCLUDES MODELS: PCF5, PCV5

Contents include:

(1) MV5 ABS Housing

(4) Adjustable bracket arms

(4) Universal mounting plates

(1) 10" Tinted acrylic dome

Mounting hardware

(1) Camera, lens, and PC Board

Mounting Instructions: (fig. 4)

1. Select unobstructed, level mounting surface.

2. Attach housing to the surface using appropriate

mounting hardware (not included).

3. Make final adjustments to the camera the viewing loca-

tions and complete all electrical connections.

4. Attach the 10" acrylic dome to the housing using the

(4) X-mas tree fasteners.

Parts List:

1 (8) 1/4" NPT nuts

2 (4) Adjustable bracket arms

3 (4) X-mas tree fastener

4 (4) Universal mounting plates

5 PCF5/PCV5 ABS housing

6 10" Tinted acrylic dome

7 Camera and PC Board

Mounting surface

MODEL: Miniature Camera

PCF5, PCV5

5. Fine focusing (see diagram below):

Fixed Lens: Manually rotate the lens until a clear picture is

achieved.

Vari-Focal Lens: First, adjust the Magnification Lock Screw

to the desired magnification (telephoto

to wide angle). Tighten the Lock Screw.

Next, adjust the Focus Lock Screw until a

clear picture is achieved. Tighten the

Lock Screw.

Fixed Lens Camera

(PCF5)

Vari-focal Lens Camera

(PCV5)

Manual focus

Focus Lock Screw

Camera Fine Focus

12.0"

8.0"

3.2"

15.9"

DESCRIPTION: Surface Mount Dome Housing,

Multiple Color Cameras

Magnification

Lock Screw

- 2 -

Video

BNC Connectors

Power Connections

NOTE: Splice wiring according to

standard electrical guidlines.

Positive and Negative connections are

interchangeable with this PC Board.

Connections CAUTION: To prevent fire or shock hazard, the UL-Listed wire

VW-1, style 1007, should be used for the cable for

24 VAC input terminals.

Wiring Chart-Cable Distance

This Chart is based on a 12VDC power supply with the

maximum Amp draw at .500 amps.

WIRE 20 18 16

FT. 180' 300' 480'

Specification

Lens Type

Minimum Illumination

Weight

Power Source

Ambient Operating

Temperature

Dimensions

at DC Source

AGC

Vertical

at AC Source

White Balance

ELC

Synchronization

Video Output

Horizontal Resolution

Signal-to-Noise Ratio

Horizontal

Angular Field of View

Vertical

Horizontal

Scanning

Scanning Area

Model Number

Ambient Operating

Humidity

3 - 8mm Fixed Focal Lens Series 4 - 8mm Vari- -Focal Lens Series

PCF1 PCF6W

PCF6

PCF5

PCF4

PCF3PCF2 PCV6W

PCV6

PCV5

PCV4

PCV3

PCV2PCV1

361 mm (H) x 272 mm (V) (Equivalent to scanning area of 1/4" pick-up tube)

525 lines / 60 fields / 30 frames

15.734 kHz

59.94 kHz

Internal Synchronization

1.0 V (p-p) NTSC Composite 75 ohms / BNC Connector

330 lines (at center area)

46 dB (with AGC OFF)

0.5 Footcandle (5 Lux) at F2.0 0.5 Footcandle (5 Lux) at F2.0 - 1.0 Footcandle

(10 Lux) at F2.8

Horizontal 53.4˚ Horizontal 51.7 - 26.7˚

Vertical 40.0˚ Vertical 38.4 - 20.0˚

On (Preset)

ATW (Preset)

-10˚C - +50˚C (14˚F - 122˚F)

Less than 90%

2.82"

4.6"

2.82"

lbs

2.82"

4.6"

2.82"

6.0"

3.15"

4.9"

3.2"

3.15"

4.9"

3.2"

5.25"

3.0"

3.625"

5.25"

3.0"

3.625"

15.9"

11.2"

15.9"

11.2"

15.9"

6.0"

10.8"

7.0"

6.0"

10.8"

7.0"

0.45

11.8

0.45

10.45

0.45

10.45

11.8

0.68

1.5 0.68

1.5

0.68

1.5 0.68

1.5

0.91

20.91

24 VAC, 40 ma

12 VDC, 80 ma

- 3 -

SAFETY PRECAUTIONSIMPORTANT SAFEGUARDS

1.ReadInstructions-Allthesafetyandoperating instructions

should be read before the unit is operated.

2. Retain Instructions - The safety and operating instructions

should be retained for future reference.

3. Heed Warnings - All warnings on the unit and in the

operating instructions should be adhered to.

4. Follow Instructions - All operating and user instructions

should be followed.

5.ElectricalConnections- Onlyaqualified electrician should

make electrical connections.

6.Attachments-Donotuseattachmentsnotrecommended

by the product manufacturer as they may cause hazards.

7. Cable Runs - All cable runs must be within permissible

distance.

8.Mounting-Thisunitmustbeproperlyandsecurelymounted

to a supporting structure capable of sustaining the weight

of the unit. Accordingly:

a.The installationshould be made by aqualified service

person, and should conform to all local codes.

b.Care should beexercised to selectsuitable hardware

to install the unit, taking into account both the

composition of the mounting surface and the weight of

the unit.Besuretoperiodicallyexaminetheunitandthe

supportingstructuretomakesurethattheintegrityofthe

installationisintact. Failuretocomplywiththeforegoing

could result in the unit separating from the support

structure and falling, with resultant damages or injury to

anyone or anything struck by the falling unit.

UNPACKING

Unpack carefully. Electronic components can be

damaged if improperly handled or dropped. If an item

appears to have been damaged in shipment, replace it

properly in its carton and notify the shipper.

Be sure to save:

1.Theshippingcarton and packagingmaterial. Theyarethe

safest material in which to make future shipments of the

equipment.

2. These Installation and Operating Instructions.

SERVICE

For service on Panasonic/Videolarm equipment contact:

Panasonic Technical Center

54 West Gude Dr.

Rockville MD 20850-1150

Phone: 301-762-5125

Fax: 301-251-0347

1-800-528-6747

9:00 AM - 5:00 PM EASTERN TIME

CAUTION: TO REDUCE THE RISK OF

ELECTRICAL SHOCK, DO NOT EXPOSE

COMPONENTS TO WATER OR MOISTURE.

Thelightningflashwithanarrowheadsymbol,

within an equilateral triangle, is intended to

alerttheusertothepresenceofnon-insulated

"dangerous voltage" within the product's

enclosurethatmaybeofsufficientmagnitude

toconstituteariskofelectricshocktopersons.

The exclamation point within an equilateral

triangle is intended to alert the user to

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

PANASONIC TECHNICAL SUPPORT

CAUTION

RISK OF

ELECTRIC SHOCK!

Dieses Handbuch passt für folgende Modelle

Andere Panasonic Sicherheitssystem Handbücher

Panasonic

Panasonic Arbitrator-CP Bedienungsanleitung

Panasonic

Panasonic SF4B-H12C Bedienungsanleitung

Panasonic

Panasonic WJ-ND400/1000 Service-Handbuch

Panasonic

Panasonic WJ-NV200 Bedienungsanleitung

Panasonic

Panasonic External Presentation unit 1728 Stücklistenhandbuch

Panasonic

Panasonic KX-HNB600 Technisches Datenblatt

Panasonic

Panasonic External Presentation unit 1728 Stücklistenhandbuch

Panasonic

Panasonic BB-HGW700A - Network Camera Router Bedienungsanleitung

Panasonic

Panasonic KX-HNS105AZ Bedienungsanleitung

Panasonic

Panasonic AW-HS50 Series Bedienungsanleitung

Panasonic

Panasonic A02-ACAM3KIT Bedienungsanleitung

Panasonic

Panasonic KX-HNS105 Bedienungsanleitung

Panasonic

Panasonic WVCP230 - CCD 120V Bedienungsanleitung

Panasonic

Panasonic WJ-HDE400 Bedienungsanleitung

Panasonic

Panasonic BL-WV10 Bedienungsanleitung

Panasonic

Panasonic KX-HGW600 Bedienungsanleitung

Panasonic

Panasonic 4414 Bedienungsanleitung

Panasonic

Panasonic Alert annunciation unit 1736 Stücklistenhandbuch

Panasonic

Panasonic WV-PB5564E Bedienungsanleitung

Panasonic

Panasonic WV-ASC970 Bedienungsanleitung

Panasonic

Panasonic PT56SX30B - 56" PROJECTION TV Bedienungsanleitung

Panasonic

Panasonic AW-HE100 Bedienungsanleitung

Panasonic

Panasonic SF4B C Series Bedienungsanleitung

Panasonic

Panasonic WV-SC386 Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung

DSC

DSC PC 4010 Betriebsanleitung

UniPOS

UniPOS 6202L Bedienungsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Rondish

Rondish Nexus Bedienungsanleitung