Panduit BT2HT Bedienungsanleitung

E-mail:

[email protected]

Technical upport:

1-800-777-3300

FIGURE 1

Page: 1 of 4

INTRODUCTION

The BT2HT Tool installs Panduit Pan-Steel coated and

uncoated S Series strap and buckles in widths of 3/8” X

.015” thick (9.5mm), 1/2” X .015” thick (12.7mm); and 5/8” X

.015” and .025” thick (15.9mm).

Note: This tool is not intended for other uses such as cutting

or tensioning other types of fastening devices.

TOOL FEATURE

A. Rear Handle

B.* Tension Pawl Release - Knob pointing towards the front

of tool for pawl engagement and to rear of tool for disen-

gagement.

C.* Anti-Backup Pawl Release - Lever up against tool for

pawl engagement and pulled down to disengage pawl.

D.* Detent Lock Pins - For controlled tension, pull both pins

forward; for manual tension, push both pins backward.

E. Cutter Handle - Cuts tie when strap is tensioned properly.

F. Cutter Blade

G. Tensioning andrel

H.* Tension Indicator Window - Located on the back of front

handle.

I.* Adjustment Knob - Adjust tension of strap application.

J. Tension Locking Set Screw

K. Front Handle - With ratchet controlled tensioning.

* ee Page 2 for Feature Detail

FIGURE 2

TOOL OPERATION

ee teps 1 - 8 on Pages 3 and 4.

PA25758A01

Rev: 03 5-2017

M TRAPPING TOOL OPERATION IN TRUCTION

BT2HT

www.panduit.com

Page: 2 of 4

PU H BACKWARD

FOR ANUAL

TENSION

PULL FORWARD

FOR CONTROLLED

TENSION

TROUBLE HOOTING

TO RELEASE AND RE OVE STRAP

FRO TOOL BEFORE CUTTING,

DISENGAGE BOTH KNOB AND LEVER.

ULTI-POSITION HANDLE

ALLOWS ACCESS TO TIGHT AREAS.

TOOL MAINTENANCE

TO INHIBIT CORROSION AND AINTAIN PERFOR ANCE OF THE TOOL, KEEP THE ETAL SURFACES COATED

WITH A LIGHT OIL (WD-40®OR EQUIVALENT).

BT2HT

Page: 3 of 4

TEP 1 TEP 2

Slide in buckle and bend the end of strap. Loop strap around bundle.

Thread strap into nose of tool

and through slot of tensioning mandrel.

TEP 3 TEP 4

Pull front handle to tension strap and rotate the tool

to touch the buckle (as shown).

Under controlled tension, the front handle will

break free when pre-determined tension is attained.

Push cutter lever downward to cut strap.

Remove cut-off portion of strap from tool.

BT2HT

Page: 4 of 4

TEP 5 TEP 6

Bend cut-off end of strap down. Position tab of the tool inside the buckle slot.

TEP 7 TEP 8

Bend the buckle lock down as shown. Strap correctly installed.

BT2HT

Andere Panduit Elektrowerkzeuge Handbücher

Panduit

Panduit RT2HT Bedienungsanleitung

Panduit

Panduit GS4EH Bedienungsanleitung

Panduit

Panduit CT-1525 Bedienungsanleitung

Panduit

Panduit PA24849A01 Bedienungsanleitung

Panduit

Panduit CT-2980/L Bedienungsanleitung

Panduit

Panduit GTH Bedienungsanleitung

Panduit

Panduit CT-2930/L Bedienungsanleitung

Panduit

Panduit CT-720 Bedienungsanleitung

Panduit

Panduit CP-991 Bedienungsanleitung

Panduit

Panduit PN433 Bedienungsanleitung

Panduit

Panduit CT-1701 Bedienungsanleitung

Panduit

Panduit CT-1090 Bedienungsanleitung

Panduit

Panduit CP-881 Bedienungsanleitung

Panduit

Panduit CA-800EZ Bedienungsanleitung

Panduit

Panduit PDM Bedienungsanleitung

Panduit

Panduit BlackFin CT-2920 CCP Series Bedienungsanleitung

Panduit

Panduit PBTMT Bedienungsanleitung

Panduit

Panduit GTH Bedienungsanleitung

Panduit

Panduit CP-881/E Bedienungsanleitung

Panduit

Panduit CT-2940 Series Bedienungsanleitung

Panduit

Panduit CT-1700 Bedienungsanleitung

Panduit

Panduit GS2B Bedienungsanleitung

Panduit

Panduit PTS Bedienungsanleitung

Panduit

Panduit CT-400 Bedienungsanleitung

Beliebte Elektrowerkzeuge Handbücher anderer Marken

AEG

AEG OMNI-JS Bedienungsanleitung

SIP

SIP 01533 Bedienungsanleitung

Ribimex

Ribimex PRS499 Bedienungsanleitung

3M Fiber Optic Connector Crimp Tool Bedienungsanleitung

Ryobi

Ryobi P524 Bedienungsanleitung

ROJEK

ROJEK FSN 300A Bedienungsanleitung

Kemper

Kemper 1740PRO Bedienungsanleitung

WABCO

WABCO OptiTire Bedienungsanleitung

EINHELL

EINHELL TE-MS 18/210 Li Bedienungsanleitung

Orgapack

Orgapack OR-T 85 Kurzanleitung

TOUGHCUT

TOUGHCUT Diamond 400 Bedienungsanleitung

Yaros

Yaros PB-3603 Bedienungsanleitung

Fein

Fein BSS 2.0 E Einrichtungshandbuch

Baileigh Industrial

Baileigh Industrial SS-2725 Bedienungsanleitung

Milwaukee

Milwaukee 2674-20 Bedienungsanleitung

Fein

Fein BLs 1.6 Bedienungsanleitung

Princess

Princess Electric Multi Sharpener Bedienungsanleitung

FOREDOM

FOREDOM K.1050 Handbuch