Panduit CT-260 Bedienungsanleitung

C -260

CRIMPING OOL

OPERA ION INS RUC IONS

Page: 1 of 2

PA24429A01

REV.: 02 5-2014

OPERA ION INS RUC IONS

C -260

For echnical Support:

1-888-506-5400, ext. 83255

E-mail:

techsupport@panduit.com

See product packaging or contact Customer Service for

UL/CSA approved tooling/product combination.

CAUTION:

Verify power is “OFF” before working on wiring with this tool.

The plastic grips are for the ser’s comfort,

and are not intended to ins late against electrical shock

while working on live electrical circ its.

NON-INSULA ED AND INSULA ED

PARALLEL SPLICE

INS RUC IONS

1. Insert stripped wire into each end of the

parallel splice. (See product packaging

for proper strip lengths.)

2. Locate parallel splice in proper crimp

pocket.

3. Position crimp pocket on the center of

the metal barrel.

4. Squeeze handles firmly.

WIRE CU ER for No. 10 AWG and

smaller copper wire.

CRIMP POCKE S for Pan-Term

insulated and non-insulated terminals,

disconnects, wire joints and splices on No.

22 to 10 AWG solid or stranded wire.

This tool is made of hardened steel and is

protected with a light coat of oil.

CRIMP POCKET

NON-INS LATED

INS LATED

www.panduit.com

NON-INSULA ED BU SPLICE

INS RUC IONS

1. Insert stripped wire into end of the butt

splice to internal wire stop. (See product

packaging for proper strip lengths.)

2. Locate butt splice in proper non-

insulated crimp pocket.

3. Position crimp pocket on the center of

the metal barrel half with wire inserted.

4. Squeeze handles firmly.

5. Repeat for other end of butt splice.

INSULA ED BU SPLICE

INS RUC IONS

1. Insert stripped wire into end of the butt

splice to internal wire stop. (See product

packaging for proper strip lengths.)

2. Locate butt splice in proper insulated

crimp pocket.

3. Position crimp pocket on the center of

the metal barrel half with wire inserted.

4. Squeeze handles firmly.

5. Close insulation if desired.

6. Repeat for other end of butt splice.

CRIMP POCKET

Page: 2 of 2

OPERA ION INS RUC IONS

NOTE:

In the interest of higher

quality and value, Panduit is

constantly improving and

updating our products.

Consequently, pictures herein may

vary from the actual product.

C -260

NON-INSULA ED

ERMINAL AND DISCONNEC

INS RUC IONS

1. Insert stripped wire into terminal or

disconnect until a minimum of 1/32" of

conductor extends beyond barrel. (See

product packaging for proper strip

lengths.)

2. Locate terminal or disconnect in proper

non-insulated crimp pocket.

3. Position crimp pocket on the center of

the metal barrel.

4. Squeeze handles firmly.

INSULA ED

ERMINAL AND DISCONNEC

INS RUC IONS

1. Insert stripped wire into terminal or

disconnect until a minimum of 1/32" of

conductor extends beyond barrel. (See

product packaging for proper strip

lengths.)

2. Locate terminal or disconnect in proper

insulated crimp pocket.

3. Position crimp pocket on the center of

the metal barrel.

4. Squeeze handles firmly.

5. Close insulation if desired.

NON-INSULA ED WIRE JOIN

INS RUC IONS

1. Twist ends of stripped wire together,

trim and insert into wire joint. (See

product packaging for proper strip

lengths and trimming instructions.)

2. Locate wire joint in proper non-insulated

crimp pocket.

3. Position crimp pocket on the center of

the metal barrel.

4. Squeeze handles firmly.

INSULA ED WIRE JOIN

INS RUC IONS

1. Twist ends of stripped wire together,

trim and insert into wire joint. (See

product packaging for proper strip

lengths and trimming instructions.)

2. Locate wire joint in proper insulated

crimp pocket.

3. Position crimp pocket on the center of

the metal barrel.

4. Squeeze handles firmly.

5. Close insulation if desired.

CRIMP POCKET

CRIMP POCKET CRIMP POCKET

CRIMP POCKET

Inhaltsverzeichnis

Andere Panduit Elektrowerkzeuge Handbücher

Panduit

Panduit PN433 Bedienungsanleitung

Panduit

Panduit BlackFin CT-2980 Bedienungsanleitung

Panduit

Panduit ST2MT Bedienungsanleitung

Panduit

Panduit PTS Bedienungsanleitung

Panduit

Panduit GS2B Bedienungsanleitung

Panduit

Panduit GTH Bedienungsanleitung

Panduit

Panduit GS4EH Bedienungsanleitung

Panduit

Panduit BT2HT Bedienungsanleitung

Panduit

Panduit CTFP-40 Bedienungsanleitung

Panduit

Panduit RT2HT Bedienungsanleitung

Panduit

Panduit GTH Bedienungsanleitung

Panduit

Panduit BlackFin CT-2920 CCP Series Bedienungsanleitung

Panduit

Panduit CP-881 Bedienungsanleitung

Panduit

Panduit CP-991 Bedienungsanleitung

Panduit

Panduit CT-720 Bedienungsanleitung

Panduit

Panduit CT-1700 Bedienungsanleitung

Panduit

Panduit ST-100 Bedienungsanleitung

Panduit

Panduit PDM Bedienungsanleitung

Panduit

Panduit CT-2940 Series Bedienungsanleitung

Panduit

Panduit CP-881/E Bedienungsanleitung

Panduit

Panduit CT-400 Bedienungsanleitung

Panduit

Panduit PA24849A01 Bedienungsanleitung

Panduit

Panduit PBTMT Bedienungsanleitung

Panduit

Panduit CT-2980/L Bedienungsanleitung

Beliebte Elektrowerkzeuge Handbücher anderer Marken

AEG

AEG OMNI-JS Bedienungsanleitung

SIP

SIP 01533 Bedienungsanleitung

Ribimex

Ribimex PRS499 Bedienungsanleitung

3M Fiber Optic Connector Crimp Tool Bedienungsanleitung

Ryobi

Ryobi P524 Bedienungsanleitung

ROJEK

ROJEK FSN 300A Bedienungsanleitung

Kemper

Kemper 1740PRO Bedienungsanleitung

WABCO

WABCO OptiTire Bedienungsanleitung

EINHELL

EINHELL TE-MS 18/210 Li Bedienungsanleitung

Orgapack

Orgapack OR-T 85 Kurzanleitung

TOUGHCUT

TOUGHCUT Diamond 400 Bedienungsanleitung

Yaros

Yaros PB-3603 Bedienungsanleitung

Fein

Fein BSS 2.0 E Einrichtungshandbuch

Baileigh Industrial

Baileigh Industrial SS-2725 Bedienungsanleitung

Milwaukee

Milwaukee 2674-20 Bedienungsanleitung

Fein

Fein BLs 1.6 Bedienungsanleitung

Princess

Princess Electric Multi Sharpener Bedienungsanleitung

FOREDOM

FOREDOM K.1050 Handbuch