Panini My Vision X Bedienungsanleitung
Panini My Vision X
Operator Manual
Panini My VisionX_07.06 6-10-2006 10:21 Pagina 1
CONTENTS
0. Preface
1. General
1.1 Audience
1.2 Safety Precautions
1.3 If the Machine is Damaged
2. Learning about the Panini My Vision X
2.1 Packaging List
2.2 External Parts Description
2.3 Internal Parts Description
3. Operating your Panini My Vision X
3.1 Document Support Installation
3.2 Extension Plate Installation
3.3 Power Cables Connection
3.4 USB 2 Cable Connection
3.5 HP C6602A Ink-Jet Cartridge Installation
3.6 HP 51604A rev.B Ink-Jet Cartridge Installation
3.7 Pocket Length Adjustment
Page 2
OPERATOR MANUAL Preface
Panini My VisionX_07.06 6-10-2006 10:21 Pagina 2
Page 3
OPERATOR MANUAL Preface
4. Getting started
4.1 Status Lights
4.2 How to Prepare and Load Checks
4.3 Clearing Jams
5. Maintenance
5.1 Cleaning the Transport
5.2 Cleaning the Contact Image Sensors
5.3 Cleaning the HP C6602A Ink-Jet cartridge
5.4 Cleaning the HP 51604A rev.B Ink-Jet Cartridge
5.5 Cleaning Photocells Detector
5.6 Replacing the Feeder and Separator Rollers
5.7 Cleaning the Reading Transport Belt
5.8 Install the External Covers
6. Specifications
6.1 Technical specifications of the Panini My Vision X
6.2 Technical specifications of the PC
7. My Vision X SD Addendum
8. My Vision X AGP Addendum
Panini My VisionX_07.06 6-10-2006 10:21 Pagina 3
Page 4
OPERATOR MANUAL Preface
Fifth Edition:
July 2006
Panini Part No.
HA-00093-04
© 2006
PANINI SpA
Via Po, 39
10124 Torino Italy
Internet: www.panini.com
PANINI NORTH
AMERICA
(Subsidiary)
577 Congress Park Drive
Dayton, OH 45459
(USA)
This manual and the software described in it are protected under the
Panini S.p.A Copyright. All rights reserved. Reproduction of this
material in any form without the express written consent of Panini
SpA or its subsidiaries is prohibited.
PANINI SpA PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY
OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED
TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE. PANINI SpA MAY MAKE IMPROVEMENTS
AND OR CHANGES IN THE PRODUCT(S) AND OR THE PROGRAM(S)
DESCRIBED IN THIS MANUAL AT ANY TIME AND WITHOUT NOTICE.
This manual could contain technical inaccuracies or typographical
errors. Changes are periodically made to the information herein; these
changes will be incorporated in new editions of this publication.
Panini My VisionX_07.06 6-10-2006 10:21 Pagina 4
Page 5
OPERATOR MANUAL Preface
Trademark Acknowledgement
PANINI logo, My Vision X, Vision API, ICR Vision and MICR Plus are trademarks or registered trademarks
of Panini SpA.
The Panini My Vision X is also UL 950 compliant:
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
The mark affixed to the product certifies that
the product satisfies the basic quality requirements.
© 2006 PANINI S.p.A., ALL RIGHTS RESERVED
Panini My VisionX_07.06 6-10-2006 10:21 Pagina 5
Page 6
OPERATOR MANUAL Preface
Proper Disposal of WEEE
FOR COUNTRIES IN THE EUROPEAN UNION (EU)
The European Commission of the European Union has determined that electrical and electronic equipment on the
market today contain parts and components that may be properly reused or recycled to reduce quantities of
materials ultimately disposed in landfills and other disposal arenas. To address this determination, waste electrical
and electronic equipment (WEEE) should not be collected or disposed with unsorted waste from private
households or businesses. Rather, it must be collected separately. Offenders will be subjected to the penalties and
measures laid down by the law
To that end, Panini products are appropriately marked with the European Union WEEE Directive’s crossed-out
dustbin symbol to indicate:
• the requirement for separate collection of electrical and electronic equipment put on the market
after August 13, 2005.
• Panini guarantees the activation of the treatment, collection, recycling and disposal procedures in
accordance with the directive 2003/108/CE (and subsequent amendments).
To dispose of our devices correctly:
• Contact the Local Authorities, who will give you the pratical information you need and the instructions
for handling the waste correctly, for example: location and times of the waste collection centres,etc.
• When you purchase a new device of ours, give a used device similar to the one purchased to our distributor
for disposal.
FOR OTHER COUNTRIES (NOT IN THE EU)
The treatment, collection, recycling and disposal of electric and electronic devices will be carried out in accordance
with the laws in force in the country in question.
Panini My VisionX_07.06 6-10-2006 10:21 Pagina 6
Page 7
OPERATOR MANUAL Preface
O. Preface
Here is an overview of the manual layout:
Chapter 1: “General” introduces you to all the general information regarding the manual or the
Panini My Vision X.
Chapter 2: “Learning about Panini My Vision X” introduces you to all the major components of
your machine.
Chapter 3: “Operating your Panini My Vision X” describes simple installation procedures.
Chapter 4: “Getting started” explains how to operate the My Vision X.
Chapter 5: “Maintenance” describes how to solve problems that you may encounter using this
machine.
Chapter 6: “Specifications” lists the main functions of the My Vision X and the features of the PC.
Panini My VisionX_07.06 6-10-2006 10:21 Pagina 7
1. General
Congratulations on your selection of the Panini My Vision X!
The Panini My Vision X is a new generation of check scanners.
With a small footprint, sleek design and quiet operation, the Panini My Vision X fits perfectly in a small
area such as a teller window, or on the back counter of bank branches.
The Panini My Vision X incorporates the latest, state-of-the-art technology and the latest standards for
check processing in the marketplace.
A unique, patent-pending 3-mode feeder can be found in the Panini My Vision X, allowing for single item
feeding, up to 30 items batch feeding with single hand insertion (in this case it is always possible to insert
documents with one hand only) or up to 100 items batch insertion by manually moving the pressure plate.
Options with limited feeder capacity are also available to cover specific customer needs.
MICR reading technology available with the Panini My Vision X is comparable to the larger and faster
reader sorter, thanks to the Panini MICR PlusTM technology.
Taking advantage of the most up to date technology, the Panini My Vision X connects to computers via
USB2.0 interface, allowing for fast data transfer at no additional cost.
A rear Ink-Jet endorser can also be found on the Panini My Vision X.
The Panini Vision API is standard on the My Vision X, guaranteeing easy and reliable software integration.
Finally, the Panini My Vision X has been designed specifically to allow for entire track accessibility,
including scanner area, for easy intervention and for maintenance purposes.
Page 8
OPERATOR MANUAL General
Panini My VisionX_07.06 6-10-2006 10:21 Pagina 8
Page 9
OPERATOR MANUAL General
1.1 Audience
1.2 Safety Precautions
This manual is written primarily for personnel who process checks or other documents.
Before you begin operating or servicing your My Vision X as instructed in this manual, please make sure
you read and understand these important safety instructions.
• Dress safely. Do not wear loose clothing, long hair or jewelry that can become entangled in moving parts.
• Do not allow anything to rest on the power cord. Do not locate the My Vision X where people may
walk on the cord.
• Always unplug the My Vision X before cleaning.
• Do not attempt to service or repair the My Vision X, except as instructed elsewhere in this manual.
• Attempting to service or repair the external power supply of the My Vision X may expose you to
dangerous voltage points or other risks.
• Refer all servicing to qualified service personnel.
Panini My VisionX_07.06 6-10-2006 10:21 Pagina 9
1.3 If the Machine is Damaged
Unplug the My Vision X from the wall outlet and refer servicing to qualified personnel under the following
conditions:
• If the power cord is damaged or frayed.
• If liquid has been spilled into the product.
• If the equipment has been exposed to rain or water.
• If the equipment does not operate normally when the operating instructions are followed.
• If the equipment has been dropped or damaged.
• If the equipment exhibits a distinct change in performance, indicating a need for service.
Adjust only those controls and replace only those items that are covered by the instructions in this manual.
If you attempt to make adjustments not covered in this manual, you may damage the
equipment and void the warranty.
Unauthorized adjustments or repairs may result in the need for extensive work by a qualified technician
to return the equipment to its proper working condition.
Page 10
OPERATOR MANUAL General
Panini My VisionX_07.06 6-10-2006 10:21 Pagina 10
Andere Handbücher für My Vision X
3
Inhaltsverzeichnis
Andere Panini Scanner Handbücher
Panini
Panini mI:Deal Bedienungsanleitung
Panini
Panini Vision NeXt Bedienungsanleitung
Panini
Panini My Vision X Handbuch
Panini
Panini EverneXt Bedienungsanleitung
Panini
Panini Vision X Bedienungsanleitung
Panini
Panini Vision 1 Bedienungsanleitung
Panini
Panini My Vision X Bedienungsanleitung
Panini
Panini My Vision X Bedienungsanleitung
Panini
Panini I:Deal Bedienungsanleitung
