ParaBody 829 Bedienungsanleitung

1CLASSH

PART # 7078201

REV. B Revision: 06/26/01

USER’S GUIDE

WARNING:

Read and follow all directions

for each step to insure proper

assembly of this product.

829 LEG CURL/EXTENSION

Version: 829107

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF

EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!

1. Before using, read all the warnings and instructions

on the use of this machine. Use only for intended

exercise. DO NOT modify the machine.

2. Obtain a medical exam before beginning any

exercise program.

3. Keep body and clothing free of all moving objects.

4. Inspect the machine before use. DO NOT use it if it

appears damaged. DO NOT attempt to fix a broken or

ammed machine. Notify your authorized ParaBody

dealer before use and have repairs made by an

authorized service technician.

5. Be certain that weight pin is completely inserted.

Use only the pin provided by the manufacturer. If

unsure, call your authorized ParaBody dealer.

6. Never pin the weights or prop plate into an elevated

position. DO NOT use the machine if found in this

condition. DO NOT attempt to fix. Notify your

authorized ParaBody dealer.

7. Inspect cables and their connections before using

machine. Pay particular attention to the cable ends.

DO NOT attempt to fix. Notify your authorized

ParaBody dealer before use and have repairs made by

an authorized service technician.

8. Make sure all spring loaded pull pins are fully

engaged in the adjustment position and fully tighten

thumbscrew before use.

9. Children must not be allowed near this machine.

Supervise teenagers.

IMPORTANT SAFETY INFORMATION

TABLE OF CONTENTS

Safety Statement.............2

General Notes..................3

Tools Required................3

Gym Layout.....................4

NOTE: In a continual effort to improve our products, specifications are subject to change

ParaBody is a trademark of Brunswick Corporation

www.parabody.com

Parts list..........................5

Assembly Instructions.....5-8

General Maintenance.......9

Warranty Statement..........10

Product Services..............11

Insert-Registration Card

IMPORTANT NOTES

Please note:

Tools Required forAssembly

* Thank you for purchasing the ParaBody 829 LEG CURL/EXTENSION. Please read these

instructions thoroughly and keep them for future reference. This product must be assembled

on a flat, level surface to assure its proper function.

NOTE:BOLTLENGTH IS MEASURED FROMTHEUNDERSIDE OFTHEHEADOFTHEBOLT.

BOLT LENGTH RULER:

* This product must be assembled on a flat, level surface to assure its proper function. DO NOT

securely tighten any frame connections until the entire frame has been assembled, unless

otherwise stated.

Bolt Length Ruler

0123456

1/2 1/2 1/2 1/2 1/2 1/2

BOLT LENGTH

* 3/4” wrench

* 9/16” wrench

* Ratchet with 3/4” and 9/16” sockets

* Adjustable wrench

* Tape measure

1 Square = 1’ X 1’

1’ 2’ 3’ 4’ 5’

1’

5’

4’

3’

2’

6’

PARTS LIST

DESCRIPTION

FRONTSUPPORTTUBE

BACK PADADJUSTTUBE

BACK PAD SUPPORTTUBE

1-3/4 SQ X 5" TUBE

1-3/4 SQ X 13-1/2" TUBE

LEG CURL/EXTENSION

BACKPADASSY

SEATPADASSY

LEGEXT HANDLE RHT

LEGEXTHANDLELFT

LEG FRAME

REARBASELEG

3/4 X 16" TUBE

3/4 X 17" TUBE

4 X 7" ROLLER PAD

1/8 X 2 X 8" PLATE

3/8” DIA SPRING PIN

1/2" DIA SPRING PIN

3/8 X 1" BOLT

KEY

PART #

3102904

3102906

3102917

3202102

3102501

3102802

3102804

3102807

6405201

6692601

3102416

6406401

3104301

6416601

6020601

3105401

3103101

6467001

DESCRIPTION

3/8 X 3" BOLT

3/8 X 4" BOLT

1/2 X 4" BOLT

1/2 X 7" BOLT

3/8"FLATWASHER

3/8" NYLOCK NUT

1/2" LOW HT. NYLOCK NUT

3/8" LOW HT. NYLOCK NUT

2" SQ END CAP

3 X 2" END CAP

2 X 1" END CAP

HINGETAB

3/4" SQ RUBBER BUMPER

1-1/2 X 3/4" GLIDE (QTY 8)

1/2"FLANGEBEARING

STARLOCK COLLAR

1-1/4 X 5" GRIP

PARABODYLOGO END CAP

QTY

LEG CURLLEG EXTENSION

PART #

6259108

6625402

6625502

6216702

6668202

6662002

6661221

6661621

6662208

6662308

6668508

6668808

6125101

6549301

6194601

6628302

6412001

6466901

3102909

KEY

QTY

Insert four PARABODY LOGO END

CAPS(37) into the ends of REAR BASE

LEG (12) and FRONT BASE SUPPORT

(1). See FIGURE 1.

STEP 1:

Securelyassemble REAR BASE LEG (12)

to LEG FRAME (11) using two 3/8 X 3”

BOLTS (20), four 3/8” FLAT WASHERS

(24), and two 3/8” NYLOCK NUTS (25).

See FIGURE 2.

STEP 3:

Securely assemble FRONT BASE SUP-

PORT (1) to LEG FRAME (11) using two

3/8 X 3” BOLTS (20), four 3/8” FLAT

WASHERS (24), and two 3/8” NYLOCK

NUTS (25). See FIGURE 3.

STEP 4:

Slide two 1-1/4 X 5" GRIPS (36) over

RIGHT LEG EXT HANDLE (9) & LEFT

LEGEXTHANDLE (10). See FIGURE 4.

STEP 5:

FIGURE 1

37 12

2425

FIGURE 2

3/8 X 3” 20

FIGURE 3

FIGURE 4

Slidetwo 1-1/4 x 5” GRIPS(36) overtubes

on REAR BASE LEG (12). See FIGURE

STEP 2:

20 3/8 X 3”

SecurelyassembleRIGHT(9)&LEFT(10)

LEGEXTHANDLEStoLEGFRAME(11)

usingtwo 3/8 X 4”BOLTS (21), four 3/8”

FLATWASHERS(24),andtwo3/8”LOW

HEIGHTNYLOCKNUTS(27).SeeFIG-

URE5.

STEP 6:

FIGURE 5

27 LOW HEIGHT

Insert two 3 X 2” END CAPS (29) into

the leg frame as shown in FIGURE 5.

STEP 7:

FIGURE 6

FIGURE 7

Securely assemble one 1/2” SPRING PIN AS-

SEMBLY(18) into the spring pin barrel on the

LEG FRAME (11) as shown in FIGURE 6.

STEP 8:

Insert four 2 X 1” END CAPS (30) into the ends

of the BACK PAD ADJUST TUBE (2) & BACK

PAD SUPPORT TUBE (3). See FIGURE 7.

STEP 9:

21 3/8 X 4”

0123456

1/2 1/2 1/2 1/2 1/2 1/2

Securely assemble BACK PAD ADJUST

TUBE (2) & BACK PAD SUPPORT TUBE

(3) to LEG FRAME (11) using one 1/2 X 7”

BOLT (23) and one 1/2” LOW HEIGHT

NYLOCK NUT (26). (NOTE: SECURELY

TIGHTENBOLTTHENBACKNUTOFF

1/4TURNTOALLOWTHETWOPARTS

TO ROTATE FREELY.) See FIGURE 8.

STEP 10:

Securely attach the BACK PAD (7)

to the BACK PAD TUBES (2 & 3)

using four 3/8 X 3” BOLTS (20)

and four 3/8” FLAT WASHERS

(24). See FIGURE 9.

STEP 11:

FIGURE 8

FIGURE 9

7 20 3/8 X 3”

Securely fasten 2 X 8” PLATE (16) to bottom of SEAT

PAD (8) using two 3/8 X 1” BOLTS (19) and two 3/8”

FLAT WASHERS (24). See FIGURE 10.

STEP 12:

FIGURE 10

23 1/2 X 7”

19 3/8 X 1”

Slide two HINGE TABS (31) over posts on

LEG FRAME (11). See FIGURE 11.

STEP 13:

FIGURE 12

FIGURE 13

Securely attach the SEAT PAD (8) to the

HINGE TABS (31) using two 3/8 X 1”

BOLTS(19)andtwo3/8”FLATWASH-

ERS (24). See FIGURE 12.

STEP 14:

19 3/8 X 1”

Attach two ROLLER PADS (15) to the

LEG FRAME (11) using one 17” ROLLER

PAD SHAFT (14) and two STARLOCK

COLLARS (35). See FIGURE 13.

STEP 15:

FIGURE 11

0123456

1/2 1/2 1/2 1/2 1/2 1/2

FIGURE 16

Securely assemble two 3/8” SPRING PIN AS-

SEMBLIES (17) into the spring pin barrels on

the LEG CURL/EXTENSION (6) as shown in

FIGURE 15.

FIGURE 15

FIGURE 14

STEP 17:

4 5

Insert 5” & 13-1/2” ROLLER PAD

ADJUSTERS (4 & 5) in the ends of the

LEG CURL/EXTENSION (6). Pull back

on SPRING PINS until ROLLER PAD

ADJUSTERS (4 & 5) lock in place. See

FIGURE 16.

STEP 18:

Attach eight 1-1/2” X 3/4” GLIDES (33) to 5”

ROLLER PAD ADJUSTER (4) and attach eight

1-1/2” X 3/4” GLIDES (33) to 13-1/2” ROLLER

PAD ADJUSTER (5) as shown in FIGURE 14.

STEP 16:

Insertthree 2” SQUARE END CAPS (28)

into the ends of the LEG CURL/EXTEN-

SION (6). See FIGURE 16.

STEP 19:

Andere Handbücher für 829

Inhaltsverzeichnis

Andere ParaBody Heim-Fitnessstudio Handbücher

ParaBody

ParaBody 400102 Bedienungsanleitung

ParaBody

ParaBody PBF353 Bedienungsanleitung

ParaBody

ParaBody PBF206 Installationsanleitung

ParaBody

ParaBody 909101 ST Bedienungsanleitung

ParaBody

ParaBody 662101 Installationsanleitung

ParaBody

ParaBody 950102 Bedienungsanleitung

ParaBody

ParaBody 426103 Bedienungsanleitung

ParaBody

ParaBody PBF011A Bedienungsanleitung

ParaBody

ParaBody 951 Bedienungsanleitung

ParaBody

ParaBody 942101 Bedienungsanleitung

ParaBody

ParaBody Serious Steel 812102 Bedienungsanleitung

ParaBody

ParaBody 889 Bedienungsanleitung

ParaBody

ParaBody GS6 Bedienungsanleitung

ParaBody

ParaBody PBF506 Bedienungsanleitung

ParaBody

ParaBody 807 BODYSYSTEM Bedienungsanleitung

ParaBody

ParaBody Parabody 805101 Bedienungsanleitung

ParaBody

ParaBody PBF049A Bedienungsanleitung

ParaBody

ParaBody 965101 Bedienungsanleitung

ParaBody

ParaBody 915101 Bedienungsanleitung

ParaBody

ParaBody PBF064 Bedienungsanleitung

ParaBody

ParaBody 701 Bedienungsanleitung

ParaBody

ParaBody Parabody 660 Bedienungsanleitung

ParaBody

ParaBody 701 Bedienungsanleitung

ParaBody

ParaBody 909101 Bedienungsanleitung

Beliebte Heim-Fitnessstudio Handbücher anderer Marken

Horizon Fitness

Horizon Fitness OXFORD 6 Bedienungsanleitung

Energetics

Energetics Multi Trainer 5.1 Bedienungsanleitung

Matrix

Matrix MG-PL Series Bedienungsanleitung

Reebok

Reebok Tbr2i Bedienungs- und Wartungshandbuch

Weider

Weider 8300 Hard Drive Bedienungsanleitung

Pure Fitness

Pure Fitness 8526HE Bedienungsanleitung

Weider

Weider 8700 I Kurzanleitung

Bowflex

Bowflex Sport 001-6961 Bedienungsanleitung

NordicTrack

NordicTrack E8200 Competition Bench Kurzanleitung

Weider

Weider WEMC10161 Bedienungsanleitung

Body Solid

Body Solid GHYP-345 Bedienungsanleitung

Evo

Evo TAHOE 5105 Bedienungsanleitung

cardiobull

cardiobull RA17 Bedienungsanleitung

JLL

JLL Ventus Pro Air Power Bedienungsanleitung

Trojan

Trojan Colorado 370 Bedienungsanleitung

Octane Fitness

Octane Fitness xRide xR650 Bedienungsanleitung

Precor

Precor Discovery Series Bedienungsanleitung

Insportline

Insportline RW600 Bedienungsanleitung