ParaBody Parabody 660 Bedienungsanleitung

660 GYM SYSTEM

CLASSH

PART # 7034501

REV. C Revision: 06/21/01

USER’S GUIDE

WARNING:

Read and follow all directions

for each step to insure proper

assembly of this product.

Version: 660101

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF

EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!

1. Before using, read all the warnings and instructions

on the use of this machine. Use only for intended

exercise. DO NOT modify the machine.

2. Obtain a medical exam before beginning any

exercise program.

3. Keep body and clothing free of all moving objects.

4. Inspect the machine before use. DO NOT use it if it

appears damaged. DO NOT attempt to fix a broken or

ammed machine. Notify your authorized ParaBody

dealer before use and have repairs made by an

authorized service technician.

5. Be certain that weight pin is completely inserted.

Use only the pin provided by the manufacturer. If

unsure, call your authorized ParaBody dealer.

6. Never pin the weights or prop plate into an elevated

position. DO NOT use the machine if found in this

condition. DO NOT attempt to fix. Notify your

authorized ParaBody dealer.

7. Inspect cables and their connections before using

machine. Pay particular attention to the cable ends.

DO NOT attempt to fix. Notify your authorized

ParaBody dealer before use and have repairs made by

an authorized service technician.

8. Make sure all spring loaded pull pins are fully

engaged in the adjustment position and fully tighten

thumbscrew before use.

9. Children must not be allowed near this machine.

Supervise teenagers.

IMPORTANT SAFETY INFORMATION

TABLE OF CONTENTS

Safety Statement.............2

General Notes..................3

Tools Required................3

Gym Layout.....................4

NOTE: In a continual effort to improve our products, specifications are subject to change

ParaBody is a trademark of Brunswick Corporation

www.parabody.com

Parts list..........................5

Assembly Instructions.....6-48

General Maintenance.......49

Warranty Statement..........50

Product Services..............51

Insert-Registration Card

IMPORTANT NOTES

Please note:

Tools Required forAssembly

* Thank you for purchasing the ParaBody 660 Gym System. Please read these

instructions thoroughly and keep them for future reference.

NOTE:BOLTLENGTH IS MEASURED FROMTHEUNDERSIDE OFTHEHEADOFTHEBOLT.

BOLT LENGTH RULER:

* This product must be assembled on a flat, level surface to assure its proper function. DO NOT

securely tighten any frame connections until the entire frame has been assembled, unless

otherwise stated.

Bolt Length Ruler

0123456

1/2 1/2 1/2 1/2 1/2 1/2

BOLT LENGTH

* Rubber mallet or hammer

* 3/4” wrench

* 9/16” wrench

* Ratchet with 3/4” and 9/16” sockets

* 5/32”, 7/32”, 5/16”Allen wrench

*Adjustable wrench

* Tape measure

1 Square = 1’ X 1’

9’

1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’

1’

6’

5’

4’

3’

2’

9’

7’

8’

PART #

6732608

7041908

6726902

6732708

6732402

7042008

6725902

6723808

6731602

6733502

6732202

6733402

6732308

6732508

6731508

6726702

7042108

6737808

6731308

6731208

6723208

6725502

6731408

6736702

6733308

6723902

6737508

6540202

6686802

6539102

6726501

7041601

6489902

7012102

6125101

6523401

6194601

6654721

6654321

6726421

6726221

3116201

3116101

6166701

6533501

6405201

3118401

3106803

6480301

3105401

6412001

6466901

6140701

3103801

3117401

3117901

KEY

QTY

PART #

3226301

3119201

3114407

6321202

6145801

6416601

6535501

3203401

6177001

6427101

6271801

3201501

3118701

3108002

3102503

6953702

7095701

6075906

6972201

3104901

6619501

6020601

6382301

6389701

6409101

6375801

3102901

3102933

3102922

3102902

3102910

3102917

3102937

3102943

3102501

3102802

3102502

3102801

3102804

3202401

3104301

6535601

6724801

6724901

6724701

7041801

6725101

6978101

6939202

6535001

6690901

3102701

6122702

6866601

6866801

3221702

DESCRIPTION

JOINT CONNECTOR CAP

8-32 X 3/16” SCREW

#10 FLAT WASHER

CONTROLLEVER

3-PRONG KNOB

PARAGLIDE

3" WHEELS

3/8 X 2-3/4” SOCKET HD SCREW

2-1/2 X 5-1/2” NONSKID STRIP

KEYHOLECLEVIS

72” ELASTIC CORD

SWIVELSNAP

2” PULLEY

WEIGHT STACK CUSHION

3/4"WASHER

HEADPLATE

15 HOLE SELECTOR SHAFT

12 LINK CHAIN

WEIGHT STACK PIN

3/4” FLANGE BEARING

3/4” SLEEVE BEARING

1/2” FLANGE BEARING

PLATE BUSHING 10 CT.

CHROME LOW ROW BAR

ANKLESTRAP

AB CRUNCH STRAP

3/8 X 1-1/4” BOLT

3/8 X 2” BOLT

3/8 X 2-3/4” BOLT

3/8 X 2-1/4” BOLT

1/2 X 3” BOLT

1/2 X 4” BOLT

1/2 X 4-1/2” BOLT

1/2 X 3-1/2” BOLT

3/8” WASHER

3/8” LOCKNUT

1/2” WASHER

1/2” LOCKNUT

1/2” LOW HT LOCKNUT

3/8” BUTTON HD CAP SCREW

3/4” SQ. RUBBER BUMPER

PEC DEC CABLE

LATCABLE

PRESS CABLE

LEG EXT CABLE

HEADPLATE CABLE

ABCABLE

WEIGHTSTACKLABELS

WEIGHTPLATE

3/8 X 4” THREADED SHAFT

3/4 X 11” SHAFT

3/8” HEX NUT

3/8 X 1/2” SPACER

BOLTCOVER

BOLTCOVERWASHER

3/4” E-RING

QTY

DESCRIPTION

BASE

CALF/LOW ROW

COUNTER LEVER

REAR UPRIGHT

PEC SEAT

BEARING HOUSING

D-RING

MIDDLE UPRIGHT

PECSEATADJUST

PRESS SWIVEL

ROLLER PADADJUST

PRESSSEATADJUST

RECEIVINGTUBE

TOMALOCKHANDLE

LEG CURL/EXT

BACKPADADJUST

TOP BOOM

PRESS BASE

PECARM LEFT

PECARM RIGHT

PRESS SUPPORT TUBE

PRESSADJUSTTUBE

PRESS BACK SUPPORT

PEC CAM

FRONT UPRIGHT

CENTERPULLEYBRACKET

PRESSARM

LATBAR

PULLEYBRACKET

SWIVELPULLEY

SHROUD

660 SHROUD LABEL

1/4 X 2 X 7-1/4” PLATE

WEIGHT STACK SPACER

3/4 OD X 16” TUBE

72-3/8” GUIDE ROD

ROLLER PAD 4 X 7

PRESS SEAT PAD

PRESS BACK PAD

PEC BACK PAD

PEC SEAT PAD

3-1/2” PULLEY

4-1/2” PULLEY

2-7/8” L BRACKET

2-3/8” L BRACKET

2” SQ. END CAP

4”VINYL CAP

5/16” SET SCREW

3/8” FLANGE SPACER

3/4" STARLOCK COLLAR

3/8” SPRING PINASSEMBLY

1/2” SPRING PINASSEMBLY

1 X 1” GLIDE

5/16” SNAP LINK

CAP PLUG

E-RING

KEY

100

101

102

103

104

105

106

107

108

109

110

111

112

PARTS LIST

FIGURE 1

STEP 1

• SECURELY assemble the LOW ROW/CALF RAISE (2) to the PRESS BASE (18) using two 1/2 X 3" BOLTS (87), two 1/2"

WASHERS (93), and one 1/2" LOCK NUT (94).

• Insert two 1/2" FLANGE BEARINGS (78) into the SWIVEL PULLEY BRACKET (30) as in FIGURE 1.

• Assemble the SWIVEL PULLEY BRACKET (30) to the PRESS BASE (18) using one 1/2 X 3-1/2" BOLT (90) and one 1/2” LOW

HEIGHT LOCK NUT (95). (TIGHTEN THE CONNECTION ENOUGH TO REMOVE THE PLAY, YETALLOWING THE

SWIVELBRACKETTOROTATEFREELY.)

• SECURELY assemble one 3-1/2” PULLEY (42) to the SWIVEL PULLEY BRACKET (30) using one 3/8 X 2" BOLT (84), two 3/

8” WASHERS (91), and one 3/8” LOCK NUT (92). See FIGURE 1.

• SECURELY assemble one 3-1/2" PULLEY (42) to the rear horizontal flat of the PRESS BASE (18) using one 3/8 X 2" BOLT (84),

one 2-3/8" CABLE RETAINING CLIP (45), two 3/8" WASHERS (91), and one 3/8" LOCK NUT (92) as shown in FIGURE 1.

(NOTE: 2-3/8” CABLE RETAINING CLIP (45) should face as shown in FIGURE 1.)

• Attach two 5-1/2 X 2-1/2" NON SKID STRIPS (65) to the LOW ROW/CALF RAISE (2) approximately where shown in FIGURE 1.

• SECURELY assemble one 4-1/2" PULLEY (43) to the lower horizontal flat of the PRESS BASE (18) using one 3/8 X 2" BOLT

(84), two 3/8" WASHERS (91), and one 3/8" LOCK NUT (92) as shown in FIGURE 1. (NOTE: Make sure there is no contact

between the two pulleys.)

93 43

42 4591

90 1/2 X 3-1/2”

84 3/8 X 2”

1/2 X 3” 87 3/8 X 2” 84

3/8 X 2” 84

LOW HT.

FIGURE 2

STEP 2

0123456

1/2 1/2 1/2 1/2 1/2 1/2

• LOOSELY assemble the REAR UPRIGHT (4) to the BASE (1) using two 1/2 X 3” BOLTS (87), two 1/2” WASHERS (93), and two

1/2” LOCK NUTS (94) as shown in FIGURE 2.

87 1/2 X 3”

FIGURE 3

STEP 3

• SECURELYassembleone 4-1/2” PULLEY(43) to theupperflat on theBASE (1) using one3/8 X 2-1/4” BOLT(86), two 3/8”WASHERS

(91),one 2-7/8” L-BRACKET (44),one 3/8” HEXNUT(108),one SWIVELSNAP (68) and one 3/8”LOCK NUT (92).SeeFIGURE 3.

86 3/8X 2-1/4”

108 HEXNUT 1

FIGURE 4

STEP4

• SECURELYassemblethree 4-1/2” PULLEYS(43) to theflats on theBASE (1)usingthree 3/8X2” BOLTS(84), six3/8”WASHERS (91),

two2-7/8” L-BRACKETS (44),andthree 3/8” LOCKNUTS(92). See FIGURE4.

84 3/8 X 2”

86 3/8 X 2”

0123456

1/2 1/2 1/2 1/2 1/2 1/2

FIGURE 5

STEP5

• LOOSELYassemble the FRONT(25) &MIDDLEUPRIGHTS(8) to the BASE (1) using four 1/2 X 4” BOLTS(88) and four 1/2” LOCK

NUTS(94) as shown inFIGURE 5.

1/2 X 4” 88 94

Inhaltsverzeichnis

Andere ParaBody Heim-Fitnessstudio Handbücher

ParaBody

ParaBody 843 Bedienungsanleitung

ParaBody

ParaBody 874 Bedienungsanleitung

ParaBody

ParaBody Free Standing Pec Dec 054 Bedienungsanleitung

ParaBody

ParaBody GS6 Bedienungsanleitung

ParaBody

ParaBody 216 Bedienungsanleitung

ParaBody

ParaBody 911101 Bedienungsanleitung

ParaBody

ParaBody 889 Bedienungsanleitung

ParaBody

ParaBody 897101 Bedienungsanleitung

ParaBody

ParaBody 426103 Bedienungsanleitung

ParaBody

ParaBody 93 Bedienungsanleitung

ParaBody

ParaBody PBF405B Bedienungsanleitung

ParaBody

ParaBody 945101 Bedienungsanleitung

ParaBody

ParaBody 828104 Bedienungsanleitung

ParaBody

ParaBody PBF353 Bedienungsanleitung

ParaBody

ParaBody 440 GYM SYSTEM Bedienungsanleitung

ParaBody

ParaBody 829 Bedienungsanleitung

ParaBody

ParaBody 458 Bedienungsanleitung

ParaBody

ParaBody Parabody 805101 Bedienungsanleitung

ParaBody

ParaBody PBF065 Bedienungsanleitung

ParaBody

ParaBody PBF501 Bedienungsanleitung

ParaBody

ParaBody 220 Bedienungsanleitung

ParaBody

ParaBody 920101 Bedienungsanleitung

ParaBody

ParaBody PBF011 Bedienungsanleitung

ParaBody

ParaBody 221 Bedienungsanleitung

Beliebte Heim-Fitnessstudio Handbücher anderer Marken

Horizon Fitness

Horizon Fitness OXFORD 6 Bedienungsanleitung

Energetics

Energetics Multi Trainer 5.1 Bedienungsanleitung

Matrix

Matrix MG-PL Series Bedienungsanleitung

Reebok

Reebok Tbr2i Bedienungs- und Wartungshandbuch

Weider

Weider 8300 Hard Drive Bedienungsanleitung

Pure Fitness

Pure Fitness 8526HE Bedienungsanleitung

Weider

Weider 8700 I Kurzanleitung

Bowflex

Bowflex Sport 001-6961 Bedienungsanleitung

NordicTrack

NordicTrack E8200 Competition Bench Kurzanleitung

Weider

Weider WEMC10161 Bedienungsanleitung

Body Solid

Body Solid GHYP-345 Bedienungsanleitung

Evo

Evo TAHOE 5105 Bedienungsanleitung

JLL

JLL Ventus Pro Air Power Bedienungsanleitung

Trojan

Trojan Colorado 370 Bedienungsanleitung

Octane Fitness

Octane Fitness xRide xR650 Bedienungsanleitung

Precor

Precor Discovery Series Bedienungsanleitung

Insportline

Insportline RW600 Bedienungsanleitung

Stamina

Stamina 55-1532 Bedienungsanleitung