Paradox IP150+ Betriebsanleitung

IP150+-EP00 PARADOX.COM

IP150+ Internet Module

Web Programming Guide

Introduction

The IP150+ Internet Module provides access to Paradox systems. With the IP150+,

connecting to a system is possible with the Insite GOLD application, PC software for

programming, upgrade and monitoring, as well as reporting to the central station by

connecting to Paradox receivers.

Connecting via IP150+ Internet Module

In order to connect to your IP150+, you will need the following information:

• IP address and port

• Panel Master code

To connect with your system from an external computer:

1) Open a web browser (e.g., Google Chrome).

2) In the address bar, enter IP address and Port number or open IP exploring tools and

double-click on the IP device you wish to connect to.

3) Log in using your panel master code.

Receiver Configuration Screen

The Receiver Configuration Screen allows you to configure your module for IP Reporting.

Receiver Status

The IP150+ module status information is displayed in this section.

Domain Name for IP Reporting

Enter a DNS with a DNS or DDNS provider. Also, enter your DNS in the section WAN1, WAN2.

An IP address must be programmed into the reporting section of the control panel for the

Domain Name field to be accessible and functional.

System Information Screen

The system information screen contains important hardware and software information on both

your security system, your IP150+ module, and PCS module (if present), and panel. The PCS

module section is only visible if a PCS module is detected.

IP150+-EP00 PARADOX.COM

I/O Configuration Screen

The I/O Configuration screen provides the I/O terminals that can be configured via the IP150+

web page. Each I/O can be defined as either an Input or an Output. The I/O terminals can

ONLY be defined from the IP150+ web interface. They are independent from the panel and

cannot be related to any panel event. An Output can only be triggered from within the IP150+’s

web interface. Output or Input triggering can allow you to have email notifications sent to

selected recipients.

When defined as an Input or Output, they can be configured as normally open or as

normally closed. However, for the Output, a 12V source must be supplied. Outputs are rated at

50mA. The method of activation is either Toggle or Pulse. If set to Toggle, a Delay Before

Activation can be defined. If set to Pulse, a Delay Before Activation and Duration can be

defined. Refer to the installation manual for input and output connections.

IP150+ Configuration Screen

The IP150+ Configuration screen allows you to configure your IP150+ Internet Module’s

settings.

Module Configuration

When the SWAN disable option is set to YES (only for a closed network), it disables access

to your system through the SWAN server. To access your system, you will need to use the fixed

IP address function in the app. When set to NO, access is enabled and push notifications can

be received.

DHCP: If the IP150+ is connected to a server using a static IP address, the DHCP protocol is

not necessary. Click “No” and configure the IP150+ manually.

Email Configuration Screen

It is not necessary to be logged in to be kept informed of changes in your system’s

status. By selecting Email configuration, you can configure your IP150+ to send email

notifications to up to 16 email addresses.

Email Account

To add an Email address

1. Open the Email selected drop-down box.

2. Select one of the 16 address locations.

3. Enter the email address in the Send to box.

4. Select the Areas and Event groups which will generate an email notification.

5. Click Save.

Note: The first Email address (01) is used in the Email’s “From” field.

If “Web access blocked” is enabled after entering a user code incorrectly after five attempts, the

web page will be blocked for 15 minutes.

Warranty

For complete warranty information on this product, please refer to the Limited Warranty Statement found on

paradox.com/Terms or contact your local distributor. Specifications may change without prior notice.

Patents

US, Canadian and international patents may apply. Paradox is a trademark or registered trademarks of Paradox

Andere Paradox Steuereinheit Handbücher

Paradox

Paradox Digiplex APR-ADM2 Bedienungsanleitung

Paradox

Paradox ZX82 Bedienungsanleitung

Paradox

Paradox ZX22 Bedienungsanleitung

Paradox

Paradox MG-RCV3 Bedienungsanleitung

Paradox

Paradox APR3-HUB2 Bedienungsanleitung

Paradox

Paradox RTX3 Bedienungsanleitung

Paradox

Paradox Digiplex EVO PRT3 Installationshandbuch

Paradox

Paradox IP150 Bedienungsanleitung

Paradox

Paradox Digiplex EVO ZX8D Bedienungsanleitung

Paradox

Paradox VDMP3 Bedienungsanleitung

Paradox

Paradox MAGELLAN RTX3 V1.5 Bedienungsanleitung

Paradox

Paradox IP150 Bedienungsanleitung

Paradox

Paradox ZX16D Bedienungsanleitung

Paradox

Paradox ZX32D Bedienungsanleitung

Paradox

Paradox PCS250G Installationsanleitung

Paradox

Paradox PCS265 Bedienungsanleitung

Paradox

Paradox IP150+ Bedienungsanleitung

Paradox

Paradox Digiplex EVO PRT3 Installationshandbuch

Paradox

Paradox PGM82 Bedienungsanleitung

Paradox

Paradox Digiplex Liberator DGP-319 Montageanleitung

Paradox

Paradox Magellan VG-RTX3 Bedienungsanleitung

Paradox

Paradox PCS265 LTE Installationsanleitung

Paradox

Paradox IP150 Bedienungsanleitung

Paradox

Paradox IP150 Betriebsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung