Paradox DigiplexNE DGP2-641 Bedienungsanleitung

LCD Keypad V1.1

DGP2-641

Reference and Installation Manual

Table Of Contents

Introduction..................................................... 3

Specifications ...................................................... 3

Installation ....................................... ................ 4

Connecting Keypad Zones.................................. 4

Programmable Output......................................... 5

Programming .................................................. 6

Entering Module Programming Mode.................. 6

Programming Methods ........................................ 7

Feat ure Select Programming ...... .. .. .. ...... .. .. .. ...... .. .. 7

Dec imal Program ming .. .. .. .. ...... .. .. .. ...... .. .. .. ...... .. .. .. 7

Module Broadcast ............................................... 7

Memory Key ........................................................ 8

Download Contents of Memory Key to Keypad... 8

Copy the Keypad Contents to the Memory Key .. 9

System Options ............................................ 11

Partition Assignment ......................................... 11

Display Access Code Entry............................... 11

Display Exit Delay Timer ................................... 11

Display Entry Delay Timer ................................. 12

Confidential Mode ............................................. 12

Confidential Mode Timer ................................... 13

Time Display Option .......................................... 14

Muting................................................................ 14

Beep on Exit Delay ............................................ 14

Chime on Zone Closure..................................... 15

Beep on Trouble ................................................ 15

Keypad Tamper Enable..................................... 16

Communication Bus Voltmeter .......................... 16

Programmable Output Options ................... 18

PGM State ......................................................... 18

PGM Deactivation Mode.................................... 18

PGM Base Time ................................................ 19

PGM Override .................................................... 19

PGM Timer ........................................................ 19

PGM Activation Event........................................ 20

PGM Deactivation Event ................................... 20

Message Programming ................................ 22

Special Function Keys ....................................... 23

Digiplex/DigiplexNE LCD Keypad 3n

1.0 Introduction

Thank you for choosing Paradox Security Systems. Digiplex/

DigiplexNE Security Systems are advanced technology security

systems that will provide reliable security protection and powerful

features that are easy to use. The elegant and user-friendly LCD

Keypad will allow easy access to the security system's functions

and information at the touch of a button. Since all programming

is accomplished through the keypad, please read this manual

carefully.

1.1 S pe cific ations

Power input: 12 to 16 Vdc, 80mA maximum

PGM current limit: 50 mA

Numberof inputs: 1

Po we r in di ca ti on: Ye llo w LE D on

Locate indica tion:

Green a nd ye ll ow LE Ds fl ash si mul tane ousl y

Bu s fau lt i nd ication : Red an d ye ll o w LED s f la sh al ter n ate ly

An ti-ta mp er sw itch: Ye s ( also used to de act iva te lo cat e)

LCD: Super Twisted Nematic display (STN), wide

viewing ang le, 2 line s of 1 6 char a cter s, b ackl igh t

an d co ntr a st ad j usta bl e

Compatibility: Any Digiplex/DigiplexNE Control Panel

4 Reference & Installation Manual

2.0 Installation

The LCD keypad (DG2P-641) is connected to the control panel's

communication bus in a star and/or daisy chain configuration.

The 4-wire communication bus provides power and two-way

communication between the control panel and all modules

connected to it. Connect the four terminals labeled red, black,

green and yellow of each keypad to the corresponding terminals

on the control panel (refer to Figure 2.1 on page 5). Refer to the

Digiplex or DigiplexN E Reference & Installation Manual f or the

maximum allowable installation distance from the control panel.

2.1 Connecting Keypad Zones

Each keypad has one traditional hardwired input terminal,

allowing you to connect one detector or door contact directly to

the keypad. For example, a door contact located at the entry

point of an establishment can be wired directly to the input

terminal of the entry point keypad instead of wiring the door

contact all the way to the control panel.

Connect the device to the keypad's input terminal as shown in

Figure 2.1 on page 5. In order to communicate its status to the

control panel, devices connected to the keypad's input terminal

must be assigned to a zone in the control panel and the zone's

parameters must be defined. For more information on zone

assignment, please refer to the Digiplex or Digiplex NE

Reference & Installation Manual. Please note that even with the

ATZ (zone doubling) feature enabled, the keypad supports only

one detection device.

Digiplex/DigiplexNE LCD Keypad 5n

2.2 Programmable Output

Each keypad has one on-board PGM. A PGM is a programmable

output that toggles to its opposite state (i.e. a normally open

PGM will close) when a specific event has occurred in the

system (refer to sect ion 5.0 on page 17). Upon act iv ation, the

PGM can provide 50mA to any device connected to it. If the

current drawn is to exceed the current limit, a relay should be

connected to the PGM as shown in Figure 2.1.

Figure 2.1: Connecting the Keypad and Keypad Zone

6 Reference & Installation Manual

3.0 Programming

To program the DGP2-641 keypad, enter Module Programming

Mode and then enter the desired section followed by the required

data. When programming the keypad, use the keypad’s

programming sheets (found in the Digiplex/DigiplexNE Modules’

Programming Guide) to keep track of which sections were

programmed and how. We strongly recommend you read this

entire manual before you begin programming.

The LCD keypad can also be programmed using the WinL oad

Security System Management Software. For more information,

refer to the WinLoad instructions or visit our Web site at

www.paradox.ca.

3.1 Entering Module Programming Mode

The keypad, like all other modules in the system , is programmed

through the control panel. To do so, you must first enter Module

Programming Mode:

1. Fr o m No r ma l Mo de pr e ss an d h o l d th e [0] key.

2. E nt er th e [INSTALLER CODE](by default 000000).

3. Enter section [953] (DGP-48) / [4003] (DGP-NE96).

4. E nt er th e ke yp ad ’ s 8 - d igi t [SERIAL NUMBER].

5. Enter the 3-digit [SECTION] you want to program.

6. Enter the required [DATA].

The control panel will then redirect all programming to the

selec ted keypad. Ev ery time t he [CL EA R ]key is pressed it will

revert to the preceding step, unless entering in data in which

Digiplex/DigiplexNE LCD Keypad 7n

case it will erase the current data entry. Please note that the

se r ia l n u m b er is l o ca te d o n th e ke yp ad ' s P C bo a r d or en te r

section [000] in Step 3 to view the keypad’s serial number.

3.2 Programming Methods

The following methods can be used when programming the

keypad:

3.2.1 Feature Select Programming

Some sections are programmed by enabling or disabling

options. Within the sections, numbers from[1] to [8 ]

represent a specific keypad option. Press the key

corresponding to the desired option and the digit will

appear in the display. This means the option is enabled.

Press the key again to remove the digit from the display

thereby disabling the option. Press [ENTER]when options

are set.

3.2.2 Decimal Programming

Some sections require that a decimal value be entered. In

this method, any digit from 000 to 255 can be entered.

3.3 Module Broadcast

The control panel’s Module Broadcast feature can be used to

copy the contents of one keypad to one or more keypads.

1. From Normal Mode press and hold the [0] key.

2. E nt er [INSTALLE R CODE](default: 000000).

3. Enter section [954] (DGP-48) / [4004] (DGP-NE96).

4. E nt er th e [SERIAL #] of the source keypad. The sourceis

the programmed keypad whose data you want to copy to

8 Reference & Installation Manual

other keypads.

5. E nt er th e [SERIAL #] of the destination keypads. The

des tination is the keypad(s)you want toprogram with the

source’s data. If you want to program more than one

keypad with the source’s data, enter the serial numbers

of the keypads one at a time.

6. O nc e yo u ha ve e n te re d th e se rial nu mb er s o f t he

keypads you want to program, press the [ACC] key.

3.4 Memory Key

SECTIONS [510] AN D [520]

Download information to and from an LCD keypad using the

memory key (PMC-3).

Only the PMC-3 memory key will function with the

LCD keypad.

3.5 Download Contents of Memory Key to Keypad

SECTION [510]

1. Insert the memory key into the keypad’s c onnec tor

labelled “KE Y” (refer to Figure 2.1 on page 5).

2. To download the contents of the memory key, enter the

Section [510] = Download all from the memory key (LCD

keypad s ec tions [001] to [396] and all

messages) to the LCD keypad.

Section [520] = Copy the LCD keypad sections [0 01] to [396]

and all messages to the memory key.

Inhaltsverzeichnis

Andere Paradox Tastenfeld Handbücher

Paradox

Paradox Spectra 1641 Bedienungsanleitung

Paradox

Paradox Esprit 640 Bedienungsanleitung

Paradox

Paradox Esprit 639 Bedienungsanleitung

Paradox

Paradox Spectra 1689 Bedienungsanleitung

Paradox

Paradox Esprit 616 Bedienungsanleitung

Paradox

Paradox K32+ Bedienungsanleitung

Paradox

Paradox Spectra 1689 Bedienungsanleitung

Paradox

Paradox Digiplex DGP-641 Bedienungsanleitung

Paradox

Paradox Esprit Bedienungsanleitung

Paradox

Paradox Digiplex DGP-641 Bedienungsanleitung

Paradox

Paradox DGP2-641 Benutzerhandbuch

Paradox

Paradox Grafica DNE-K07 Betriebsanleitung

Paradox

Paradox K70C Bedienungsanleitung

Paradox

Paradox Grafica Bedienungsanleitung

Paradox

Paradox Digiplex DGP2-648 Montageanleitung

Paradox

Paradox K35 Bedienungsanleitung

Paradox

Paradox K656 Touch Sense Bedienungsanleitung

Paradox

Paradox Digiplex DGP-641 Bedienungsanleitung

Paradox

Paradox REM3 Bedienungsanleitung

Paradox

Paradox Esprit+ 642 Bedienungsanleitung

Paradox

Paradox Digiplex DGP-620 Betriebsanleitung

Paradox

Paradox Imperial Digiplex Evo R915 Bedienungsanleitung

Paradox

Paradox K32LCD+ Bedienungsanleitung

Paradox

Paradox Paradox Esprit 616LED Bedienungsanleitung

Beliebte Tastenfeld Handbücher anderer Marken

BFT

BFT SELETTO Bedienungsanleitung

Micro Id

Micro Id MP7G3BL Gebrauchsanweisung

WindowMaster

WindowMaster WLI 130 Bedienungsanleitung

ACT

ACT ACT PRO 1030 Bedienungsanleitung

Cardin

Cardin SSB Series Bedienungsanleitung

Harman Kardon

Harman Kardon KP 1 Bedienungsanleitung

Chamberlain

Chamberlain KPR2000 Benutzerhandbuch

CYP

CYP CR-KP1 Bedienungsanleitung

Aeware

Aeware k-35 Series Referenzhandbuch

Aritech

Aritech CS-175 Series Bedienungsanleitung

GE NetworX NX-1600E Series Bedienungsanleitung

Lenze AC Tech

Lenze AC Tech MC SERIES Bedienungsanleitung

Burg Wächter

Burg Wächter secuENTRY 7711 Bedienungsanleitung

Aeware

Aeware in.k450 Bedienungsanleitung

Lenze

Lenze EPM-H410 Bedienungsanleitung

Toshiba

Toshiba RKP007Z Bedienungsanleitung

Gemini

Gemini GEM-DXK1 KEYPAD Bedienungsanleitung

Russound

Russound MDK-C5 Betriebsanleitung