Paradyne FrameSaver 9123 Bedienungsanleitung

FrameSaver®9123 Router

Installation Instructions

Document Number 9123-A2-GN11-00

March 2003

Contents

Product Documentation Online ..................................................................... 2

Upgrading a Unit to the Advanced SLM Feature Set .................................... 2

Package Checklist ......................................................................................... 2

Preparation ................................................................................................... 3

Cables You May Need to Order .................................................................... 3

Safety Instructions ........................................................................................ 4

Installing the Power Supply and Cord ........................................................... 4

Connecting to an Asynchronous Terminal or PC .......................................... 5

Verifying that Self-Test Passed ..................................................................... 5

Menu Hierarchy ............................................................................................. 6

A Quick Guide to Configuration .................................................................... 9

Full Installation and Setup ............................................................................ 10

About the Installation Procedures ................................................................. 10

Minimal Installation for Service Providers (Leased Line Mode) .................... 12

Setting Up Local Management at the Central Site ........................................ 14

Automatic Configuration ................................................................................ 14

Connecting to the Network ........................................................................... 15

Configuring SNMP Trap Managers and Traps .............................................. 16

Verifying the End-to-End Path ....................................................................... 16

Connecting to the Ethernet ........................................................................... 17

Connecting to the DTE (Router or FRAD) .................................................... 18

Verifying That Data is Being Received .......................................................... 19

Checking PVC Connections .......................................................................... 19

Important Safety Instructions ....................................................................... 20

EMI Notices .................................................................................................. 21

Government Requirements ........................................................................... 21

Warranty, Sales, Service, and Training Information ...................................... 24

Document Feedback ..................................................................................... 24

Trademarks ................................................................................................... 24

Patent Notification ......................................................................................... 24

Product Documentation Online

Complete documentation for this product is available at www.paradyne.com.

Select

Support

→

Technical Manuals

→

FrameSaver Frame Relay Devices.

Select the following documents:

FrameSaver SLV Technical Description

(9000-A2-GB30)

FrameSaver SLV Configuration Reference

(9000-A2-GB31)

FrameSaver SLV SNMP Reference

(9000-A2-GB32)

FrameSaver SLV Operations Guide

(9000-A2-GB33)

FrameSaver SLV Router Command Line Interface

(9000-A2-GB34)

To order a paper copy of a Paradyne document, or to speak with a sales representative,

please call 1-727-530-2000.

Upgrading a Unit to the Advanced SLM Feature Set

Full Service Level Management (SLM) capability can be activated in units that have the

basic diagnostic feature set at any time. This is an optional feature that adds real-time

and historical network performance monitoring and SLA (Service Level Agreement)

reporting capabilities to your FrameSaver unit and network. Simply order a Feature

Activation Certificate and provide the model to be activated, your OpenLane®SLM

system license key number, and the number of FrameSaver units to be activated to SLM

capability. You can order the certificate for a single unit or for many units.

OpenLane SLM Release 5.3 or above is required to schedule activation of SLM features

in units, and to manage the number of activations remaining on the certificate.

OpenLane also provides a Certificate Summary Report to assist you in the management

of the certificate.

When the Feature Activation Certificate arrives, add the Activation Certificate Number to

your OpenLane SLM application’s database. Activations can occur at any time, for as

many units as desired, until no activations remain for the certificate. When ready to

activate units, simply select the units to be activated and schedule the activations. The

activations occur when scheduled, and OpenLane updates the certificate information.

Contact your sales representative for additional information.

Package Checklist

Verify that your package contains the following:

❑FrameSaver Router

❑Power cord with a wall-mount 120 VAC power transformer

❑Self-mounting tie wrap for power cord strain relief

❑RJ48C modular cable for U.S. network access

Be sure to register your warranty at www.paradyne.com/warranty.

Preparation

Make sure you have:

❑A dedicated, grounded power outlet that is protected by a circuit breaker within

6 feet of the FrameSaver unit

❑A clean, well-lit, and ventilated site that is free from environmental extremes

❑One to two feet of clearance for cable connections

❑A physical connection to the frame relay T1 network

❑An asynchronous terminal or PC (personal computer)

❑If desired, an operable Ethernet LAN (Local Area Network) connection for access

by an NMS (Network Management System)

❑Configuration information for the FrameSaver unit being installed or replaced

❑Appropriate cables (see

Cables You May Need to Order

, below)

For additional information, see the

FrameSaver SLV Technical Description

(9000-A2-GB30)

Cables You May Need to Order

Contact your sales representative to order cables.

If connecting to . . . Order a . . .

Feature

Number Part Number

T1 line interface/

connector

For use in Canada.

T1 line interface cable,

RJ48C-to-CA81A

(20feet/6.1meters)

3100-F1-510 035-0221-2031

Asynchronous

terminal or PC with an

8-pin modular

interface/connector

Standard EIA-232

straight-through cable,

8-pin modular-to-DB25

(14feet/4.3meters)

3100-F2-540 035-0314-1431

PC with a D-Sub9

interface/connector

Standard EIA-232

straight-through cable,

D-Sub9-to-DB25

(14feet/4.3meters)

3100-F2-550 035-0313-1431

External device

(such as a modem)

Standard EIA-232-D

crossover cable

(14feet/4.3meters)

9008-F1-550 035-0336-1431

Safety Instructions

Please refer to the

Important Safety Instructions

on page 19.

Installing the Power Supply and Cord

Procedure

1. Insert the power cord’s plug into the POWER jack.

2. Plug the power supply into the grounded power outlet and check the LEDs.

If any LEDs light, you have power. If not, refer to

Troubleshooting

in the

FrameSaver

SLV Operations Guide (9000-A2-GB33)

for possible explanations.

3. Insert the self-mounting tie wrap in the leftmost hole (hole with a dark circle around

it) until it snaps securely into place. The tie wrap provides strain relief for the power

cord.

4. Loop the tie wrap around the power cord, thread it through the hole at the base of

the wrap, and pull it snugly around the cord.

00-16684

Grounded

Power

Outlet

ALM

TEST

SIG

OOF

ALM

NetworkSystem Por t

FrameSaverTM SLV

FrameSaver

®FLEX

9123-C

ALM

System

COM

NET

POWER

ETHERNET

Connecting to an Asynchronous Terminal or PC

A VT100-compatible asynchronous terminal or a PC providing VT100 terminal

emulation must be used to set up access to and management of the unit.

Procedure

1. Configure the terminal or PC so it is compatible with the FrameSaver unit:

— Baud Rate set to 19.2 kbps.

— Character length set to 8 data bits.

— Parity set to none.

— Stop bit set to 1.

— Flow Control set to None.

2. Insert the DB25 end of the EIA-232 cable into the FrameSaver unit’s COM port.

3. Insert the other end of the cable into the terminal or PC.

4. Tighten the screws on each side of the connector to secure the cable.

5. Press Enter on the keyboard to display the Main Menu.

If the Main Menu does not appear, recheck the terminal or PC settings (see Step 1),

or press the Enter key. Refer to

Troubleshooting

in the

FrameSaver SLV Operations

Guide (9000-A2-GB33)

for other possible explanations.

Verifying that Self-Test Passed

To verify that the unit passed its self-test, go to the System and Test Status screen.

Main Menu

→

Status

→

System and Test Status

The results of the self-test appear directly under the screen title.

If any failure messages appear, reset the unit by disconnecting, then reconnecting the

power cord. The unit will perform the self-test again. If the failure reappears, call your

service representative for assistance.

COM

NET

POWER

ETHERNET

COM

Port

00-16685

Menu Hierarchy

The Menu Hierarchy shows the organization of the FrameSaver unit’s screens. Support

for all features may not be available in the firmware release you are running.

S t a t u s System and Test

Status

Self-Test Results

Last Reset

Health and Status

Te s t S t a t us

LMI Reported

DLCIs

DLCI

Status

CIR (bps)

IP Path

ConnectionStatus

Device Name

IP Address

Status

Discovery Source

PVC Connection

Status

Source Link, DLCI, EDLCI

Primary Destination Link, DLCI, EDLCI,

Status

Timeslot

Assignment Status

Network Timeslot Assignment Status

IP Routing Table

(Management

Traffic)

Destination

Mask

Gateway

Hop

Ty p e

Interface

TTL

Performance

Statistics

Service Level Verification

DLCI

Frame Relay

ESF Line

Ethernet

Clear All Statistics

Tr a p E v e n t L o g Number of Trap Events

Time of Day

Event

Display LEDs and

Control Leads

I d e n t i t y System

NAM

Test NetworkPVCTests PVC Loopback

Send Pattern

Monitor Pattern

Network Physical

Tests

Local Line Loopback

Local Payload Loopback

Remote Send Line Loopback

Send Pattern

Monitor Pattern

IP Ping

Lamp Test

Abort All Tests

Configuration System Frame Relay and LMI

PPP

Class of Service Definitions

Service Level Verification

General

Network Physical

Frame Relay

PPP

DLCI Records

Virtual Router

Ports

PPP

DLCI Records

Time Slot

Assignments

Link Layer Network Assignments

Clear Assignments

PVC Connections Source Link, DLCI, EDLCI

Primary Destination Link, DLCI, EDLCI

IP Path List Add and Display Static Paths

Management and

Communication

Options

Node IP

Management PVCs

General SNMP Management

Telnet and FTP Sessions

SNMP NMS Security

SNMP Traps

Ethernet Management

Communication Port

External Modem (on COM Port)

Auto-

Configuration

Frame Relay Discovery Mode

Automatic Circuit Removal

Control System

Information

Device Name

System Name, Location, Contact

Date

Time

Administer Logins Login ID

Password

Access Level

Change Operating

Mode

Back-to-Back Mode

Standard Mode

Select Software

Release

Current Release

Alternate Release

Switch & Reset

LMI Packet

Capture Utility

Capture Interface

Packet Capture Start/Stop

Status

Packets in Buffer

Display LMI Trace Log

Clear Device Fail

Telnet

Reset Device

Easy Install Service Type

Node IP Address

Node Subnet Mask

TS Access

Create Dedicated Network Mgmt Link

Ethernet Management Options Screen

Time Slot Assignment Screen

Network 1 Line Framing Format

Network 1 Line Build Out

Network 1 Line Coding Format

DS0 Base Rate

A Quick Guide to Configuration

The FrameSaver unit should operate using the default (factory-set) configuration

options, with exception to the changes specified in these installation instructions. Refer

to the following table for help in navigating through the menus.

As an example, follow these steps to go to the Configuration Edit/Display menu so you

can start setting up the unit.

To load a configuration for editing:

1. From the Main Menu, press the down arrow key twice so the cursor is on

Configuration.

2. Press Enter to display the Configuration menu. The Load Configuration From menu

appears.

3. Press Enter to select Current Configuration (the cursor is already on this selection).

The Configuration Edit/Display menu appears.

This sequence of steps would be shown as the menu selection sequence:

Main Menu

→

Configuration

To save a configuration option change:

1. Press Ctrl-a to switch to the function keys area at the bottom of the screen.

2. Ty p e sor S(Save) and press Enter. The Save Configuration To menu appears.

3. Press Enter again to save your changes to the Current Configuration.

4. Press Esc until the Configuration Edit/Display menu reappears to continue

configuring the unit.

Press Ctrl-a, type m(MainMenu), and press Enter to return to the Main Menu.

In the sections that follow, only the minimum option changes required are included so

you will have a quick and trouble-free installation. See the

FrameSaver SLV

Configuration Reference (9000-A2-GB31)

for more information.

Press the . . . To . . .

Esc key Go back one screen or menu level. To see a visual

representation of the menu levels, see

Menu Hierarchy

page 6.

Tab key, or

Up (

↑

), Down (

↓

Left (

←

) and Right (

→

)

Arrow keys

Move the cursor from one menu item to the next.

Enter or Return key Complete the menu or option selection.

Spacebar Display the next available setting when changing a

configuration option. All the available settings for an option

appears at the bottom of the screen.

About the Installation Procedures

There are two methods for installing and setting up the FrameSaver unit.



One person can install and set up the unit. If this is the case, see

Full Installation

and Setup



An installer can physically install and set up access to the unit, and the network

operation center (NOC) can complete the setup. If this is the case, see

Minimal

Installation for Service Providers

on page 12.

Certain procedures are common to both the full installation and minimal methods. These

procedures are referenced in the full and minimal installation instructions (starting with

Setting Up Local Management at the Central Site

on page 13

Full Installation and Setup

An Easy Install screen is provided to simplify installation and setup. The Easy Install

feature can be used when one person installs and sets up the FrameSaver unit from

beginning to end.

Procedure

1. Select the Easy Install feature.

Main Menu

→

Easy Install

About the Installation Procedures

There are two methods for installing and setting up the FrameSaver unit.



One person can install and set up the unit. If this is the case, see

Full Installation

and Setup



An installer can physically install and set up access to the unit in leased line mode,

and the network operation center (NOC) can switch the unit to frame relay mode

and complete the setup. If this is the case, see



An installer can physically install and set up access to the unit, and the network

operation center (NOC) can complete the setup. If this is the case, see

Minimal

Installation for Service Providers

on page 12.

Certain procedures are common to both the full installation and minimal methods. These

procedures (starting with

Setting Up Local Management at the Central Site

on page 13)

are referenced in the full and minimal installation instructions. Refer to them, as needed.

Easy Install Screen Example

2. Verify that the Service Type is Frame Relay.

main/easy_install 9123

Device Name: Node A 12/27/2002 10:32

EASY INSTALL

Node IP Address: 000.000.000.000 Clear

Node Subnet Mask: 000.000.000.000 Clear

TS Access: DLCI 980

Create a Dedicated Network Management Link

Ethernet Port Options Screen

Time Slot Assignment Screen

Network 1 Line Framing Format: ESF

Network 1 Line Build Out (LBO): 0.0

Network 1 Line Coding Forma B8ZS

DS0 Base Rate (Kbps): Nx64

-----------------------------------------------------------------------------

Ctrl-a to access these functions, ESC for previous menu MainMenu Exit

Save

Inhaltsverzeichnis

Andere Paradyne Netzwerk-Router Handbücher

Paradyne

Paradyne Hotwire 6212 Bedienungsanleitung

Paradyne

Paradyne Hotwire 6301 Bedienungsanleitung

Paradyne

Paradyne Hotwire Routers Bedienungsanleitung

Paradyne

Paradyne 6212-I1 Bedienungsanleitung

Paradyne

Paradyne Hotwire 6381 Bedienungsanleitung

Paradyne

Paradyne FrameSaver DSL 9783 CSU/DSU Bedienungsanleitung

Paradyne

Paradyne Hotwire 6212 Bedienungsanleitung

Paradyne

Paradyne 6382 Bedienungsanleitung

Paradyne

Paradyne iMarc DSL 9783 Bedienungsanleitung

Paradyne

Paradyne Hotwire 6341 Bedienungsanleitung

Paradyne

Paradyne Hotwire 6341 Bedienungsanleitung

Paradyne

Paradyne 6212-A2 Bedienungsanleitung

Paradyne

Paradyne Hotwire 6212 Original Betriebsanleitung

Paradyne

Paradyne 1740 SHDSL Original Betriebsanleitung

Paradyne

Paradyne Hotwire 6381 Kurzanleitung

Paradyne

Paradyne iMarc SLV Bedienungsanleitung

Paradyne

Paradyne FrameSaver DSL 9783 CSU/DSU Bedienungsanleitung

Paradyne

Paradyne Hotwire 6301 Bedienungsanleitung

Paradyne

Paradyne Hotwire 6351 Bedienungsanleitung

Paradyne

Paradyne FrameSaver 9783 Bedienungsanleitung

Paradyne

Paradyne 1740 SHDSL Bedienungsanleitung

Paradyne

Paradyne BitStorm 6211 CPE Bedienungsanleitung

Paradyne

Paradyne Hotwire 6321/6322 IDSL Router Bedienungsanleitung

Paradyne

Paradyne FrameSaver 9783 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise