Parkside PDSP 1000 A1 SANDBLASTER GUN Bedienungsanleitung

PDSP 1000 A1

DRUCKLUFT-SANDSTRAHLPISTOLE

Bedienungs- und Sicherheitshinweise

Originalbetriebsanleitung 3

BLÄSTRINGSPISTOL, TRYCKLUFT

Bruksanvisning och säkerhetsanvisningar

Översättning av bruksanvisning i original

TRYKLUFT-SANDBLÆSERPISTOL

Brugs- og sikkerhedsanvisninger

Oversættelse af den originale driftsvejledning

PAINEILMAKÄYTTÖINEN

HIEKKAPUHALLUSPISTOOLI

Käyttö- ja turvaohjeet

Alkuperäisen käyttöohjeen käännös

SANDBLASTER GUN

Operation and Safety Notes

Translation of original operation manual

ΠΙΣΤΟΛΙ ΑΜΜΟΒΟΛΗΣ ΠΙΕΣΗΣ

Υποδείξεις χειρισμού και ασφαλείας

Μετάφραση των αυθεντικών οδηγιών λειτουργίας

GB/IE/CY Operation and Safety Notes Page 5

FI Käyttö- ja turvaohjeet Sivu 17

SE Bruksanvisning och säkerhetsanvisningar Sidan 29

DK Brugs- og sikkerhedsanvisninger Side 41

GR/CY Υποδείξεις χειρισμού και ασφαλείας Σελίδα 53

DE/AT/CH Bedienungs- und Sicherheitshinweise Seite 65

Before reading, unfold the page containing the illustrations and familiarise yourself with all

functions of the device.

Käännä ennen lukemista kuvallinen sivu esiin ja tutustu seuraavaksi laitteen kaikkiin

toimintoihin.

Vik ut bildsidan och ha den till hands när du läser igenom anvisningarna och gör dig

bekant med apparatens/maskinens funktioner.

Før du læser, vend siden med billeder frem og bliv bekendt med alle apparatets funktioner.

Πριν ξεκινήσετε την ανάγνωση, ανοίξτε τη σελίδα με τις εικόνες και εξοικειωθείτε με όλες τις

λειτουργίες της συσκευής.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich

anschließend mit allen Funktionen des Gerätes vertraut.

A EB

5GB/IE/CY

Introduction

Proper use............................................................. Page 7

Features and equipment ...................................... Page 7

Included items ...................................................... Page 8

Technical data...................................................... Page 8

Safety advice................................................ Page 8

Operation

Connecting the compressed air source .............. Page 10

Filling the blast medium container....................... Page 11

Using the sandblasting gun (see Figs. B, C)......... Page 11

Cleaning ............................................................ Page 12

Service................................................................ Page 12

Warranty.......................................................... Page 13

Disposal............................................................. Page 14

Declaration of Conformity/

Manufacturer............................................... Page 15

Table of contents

6 GB/IE/CY

The following pictograms are used in these operating

instructions/on the device:

Read instruction manual!

Observe caution and safety notes!

Risk of explosion!

Wear hearing protection, dust protection mask

and protective glasses.

Keep children away from the device!

Never point the device at people or animals.

No smoking!

Dispose packaging and appliance in an

environmentally-friendly way!

7GB/IE/CY

Sandblaster gun PDSP 1000 A1



Introduction

Please make sure that you familiarise yourself fully with the

way the sandblasting gun works before you use it for the ﬁrst

time and that you understand how to handle compressed

air sand blasting guns correctly. To help you do this, please read the

accompanying operating instructions. Keep these instructions in a safe

place. If you pass the sandblasting gun on to anyone else, please ensure

that you also pass on all the documentation. Keep these instructions in

a safe place. If you pass the device on to anyone else, please ensure

that you also pass on all the documentation.



Proper use

This device is intended for the removal of rust and paint from metal

surfaces. Any other use or modiﬁcation to the device shall be considered

as improper use and could give rise to considerable risk of accident.

We will not accept liability for loss or damage arising from improper

use. The device is intended for private, domestic use only.



Features and equipment

1Sandblasting gun

2Trigger

3Plug-in nipple for compressed air connection

4Blast medium container

5Blast nozzle

Introduction

8 GB/IE/CY

Introduction/Safety advice



Included items

1 Sandblaster gun PDSP 1000 A1

1 Operating instructions



Technical data

Max. Working pressure: 8bar

Recommended working air pressure: 3–5bar

Compressed air consumption: 130–260l/min

Nozzle ø: 2.8mm

Container capacity: 1000ml

Volume ﬂow rate: typically 200–220g/Min.

Required air quality: Cleaned and oil-free

Working settings: Working air pressure setting at

the pressure reducer max. 8bar.

Sound pressure level: xxdB(A)

Sound power level: xxdB(A)

Values determined in accordance with EN 14462 (EN1953/A1:2009).

Safety advice

WARNING! Read all the safety advice and instructions.

Even minor failures to observe the safety advice and instructions could

lead to severe injury.

KEEP ALL THE SAFETY ADVICE AND INSTRUCTIONS IN A SAFE

PLACE FOR FUTURE REFERENCE.

9GB/IE/CY

Safety advice

 Check the device for damage before bringing it into

use. Do not use the device if you discover any defects.

 Keep children and other people away while

you are operating the sandblasting gun. Dis-

tractions can cause you to lose control of the device.

 RISK OF INJURY! IMPROPER USE! Never point

the device at people or animals.

 For your own safety, wear suitable personal

protective equipment.

 Wear an approved dust mask/

protective hood!

 Wear protective glasses!

 RISK OF EXPLOSION! Do not use the sandblasting

gun 1in environments containing gases, open ﬂames,

ﬁres or gas-operated water heaters.

 NO SMOKING!

 Work in adequately ventilated spaces only.

 Never use oxygen or other combustible gas as the

energy source.



Never exceed the maximum working air pressure of 8bar.

 WARNING! RECOIL FORCES! High working pressures can

give rise to recoil forces that under certain conditions can result in

danger from continuous loading.

 DANGER OF INJURY! Disconnect the device from the compressed

air source before carrying out any repairs or maintenance of the

device or moving it to another location.

10 GB/IE/CY

 DANGER OF INJURY! Disconnect the device from the compressed

air source before ﬁlling it with blast medium.

 NOTE! Please observe the safety advice provided by the manu-

facturer of the blast medium.

 Use only materials for the blast medium that are suit-

able for the sandblasting gun. Do not use quartz sand.

There is the danger of toxic silicon dust forming.

 Take precautions to ensure that other people are not

contaminated (dust generation).

 Ensure that the spent blast medium is trapped and

collected so that it can be disposed of in an environ-

mentally compatible manner.

 Do not remove rating plates or labels - they are safety-relevant

parts of the device.

 If you are inexperienced in the use of this type of device, you should

seek out information or training to learn how to handle it safely.



Operation



Connecting the compressed air source

NOTE: Operate the sandblasting gun 1only with cleaned, conden-

sate- and oil-free compressed air and never exceed the maximum

working air pressure at the device of 8bar.

NOTE: The compressed air source must be ﬁtted with a (ﬁlter)/pres-

sure reducer so that the air pressure can be regulated.

 Connect the sandblasting gun to a suitable compressed air source

by connecting the quick-release coupling of the air supply hose with

the plug-in nipple 3to the sandblasting gun 1. It locks itself in

place automatically.

Safety advice/Operation

11GB/IE/CY

Operation



Filling the blast medium container

 Always use a suitable blast medium for your sand blasting work.

NOTE: We recommend using a silica-free blast medium

(e.g. ground blast furnace slag) with a grading of 0.2mm–0.8mm.

 Ensure that the blast medium is completely dry and not too coarse.

NOTE: The maximum particle size is 0.8mm.

 Turn the bayonet cap of the blast medium container 4to open it.

 Pull the blast medium container 4oﬀ downwards.

 Fill the blast medium container 4with the desired amount of

blast medium.

 Ensure that the maximum capacity of the container (1000ml) is

not exceeded.

 Screw the blast medium container 4back on and lock it in place

by inserting and turning it on to the container lid (see Figs. A).



Using the sandblasting gun

(see Figs. B, C)

 Carefully prepare the workpiece before sand blasting it.

Clean it if necessary.

NOTE: Deposits of dust and grease can have a considerably

detrimental eﬀect on the result.

 Carefully mask or tape oﬀ everything that is not to be sand blasted.

 Ensure that there is always a minimum distance of 20cm between

the sandblasting gun 1and the surface being sand blasted.

Switching on:

 Press the trigger 2to start operating the sandblasting gun 1.

Andere Handbücher für PDSP 1000 A1 SANDBLASTER GUN

Inhaltsverzeichnis

Sprachen:

Andere Parkside Sander Handbücher

Parkside

Parkside PDS 290 A1 Bedienungsanleitung

Parkside

Parkside PTSG 140 A1 Bedienungsanleitung

Parkside

Parkside XQ 270 - MANUEL 4 Bedienungsanleitung

Parkside

Parkside KH 3115 BELT SANDER Bedienungsanleitung

Parkside

Parkside PDEXS 125 A1 Bedienungsanleitung

Parkside

Parkside PBS 600 A1 Bedienungsanleitung

Parkside

Parkside PTSG 140 D2 Bedienungsanleitung

Parkside

Parkside PBS 900 C3 Bedienungsanleitung

Parkside

Parkside PMFS 200 C3 Bedienungsanleitung

Parkside

Parkside PBS 900 A1 Bedienungsanleitung

Parkside

Parkside PHS 160 B2 Bedienungsanleitung

Parkside

Parkside PBTS 370 A1 Kurzanleitung

Parkside

Parkside KH 3040 AIR SANDBLASTING GUN Bedienungsanleitung

Parkside

Parkside PDS 290 A1 Bedienungsanleitung

Parkside

Parkside XQ90 - MANUEL 2 Bedienungsanleitung

Parkside

Parkside 315561 Bedienungsanleitung

Parkside

Parkside PSS 310 Bedienungsanleitung

Parkside

Parkside XQ 600 - MANUAL 2 Bedienungsanleitung

Parkside

Parkside PBSD 600 A1 Bedienungsanleitung

Parkside

Parkside 75637 Bedienungsanleitung

Parkside

Parkside PTSG 140 A1 Bedienungsanleitung

Parkside

Parkside PMFS 200 A1 Bedienungsanleitung

Parkside

Parkside 79939 Bedienungsanleitung

Parkside

Parkside PES 600 Bedienungsanleitung

Beliebte Sander Handbücher anderer Marken

Oliver

Oliver 6305 Bedienungsanleitung

Jet

Jet 22-44 Pro-3 Service-Handbuch

Makita

Makita M9204 Handbuch

Makita

Makita M9204 Bedienungsanleitung

Clarke

Clarke Woodworker CBS1-5B Bedienungsanleitung

Chicago Pneumatic

Chicago Pneumatic CP9778 Bedienungsanleitung

Nitto Kohki

Nitto Kohki BB-20 Bedienungsanleitung

Ferm

Ferm FEOS-135 Bedienungsanleitung

Unior

Unior 1510 Bedienungsanleitung

stayer

stayer ls1200 Bedienungsanleitung

Jet

Jet JSG-96 Service-Handbuch

Status

Status XPA Series Bedienungsanleitung

Clarke

Clarke EZ Sand Bedienungsanleitung

Craftsman

Craftsman 113.22521 Bedienungsanleitung

Craftsman

Craftsman 113.225831 Bedienungsanleitung

CLAS

CLAS OP 1429 Bedienungsanleitung

Makita

Makita 9207SPB Bedienungsanleitung

Flex

Flex ST 1005 VE Bedienungsanleitung