Parkside PMFWZ 1 A1 Technische Daten

MULTI-PURPOSE TOOL

ACCESSORIES PMFWZ 1 A1

MULTI-PURPOSE TOOL ACCESSORIES

Assembly, operating and safety instructions

PRIBOR ZA VIŠENAMENSKI ALAT

Uputstva o sastavljanju, upotrebi i bezbednosti

ΕΞΑΡΤΉΜΑΤΑ ΠΟΛΥΕΡΓΑΛΕΊΟΥ

Οδηγίες συναρμολόγησης, χειρισμού και ασφάλειας

MULTIFUNKTIONSWERKZEUG-ZUBEHÖR

Montage-, Bedienungs- und Sicherheitshinweise

IAN 385615_2107

GB/CY Assembly, operating and safety instructions Page 3

RS Uputstva o sastavljanju, upotrebi i bezbednosti Strana 16

GR/CY Οδηγίες συναρμολόγησης, χειρισμού και ασφάλειας Σελίδα 30

DE/AT/CH Montage-, Bedienungs- und Sicherheitshinweise Seite 43

3GB/CY

Introduction ................................... Page 4

Intended use .................................. Page 4

Scope of delivery ............................. Page 5

Safety instructions............................ Page 5

Personal safety ................................... Page 5

Safety instructions for all types of use ................. Page 6

Kickback and related safety instructions ............... Page 8

Use.............................................. Page 9

Before use ...................................... Page 9

Sawing / Cutting ................................. Page 9

Sanding ........................................ Page 9

Instructions for mounting ........................... Page 10

Meaning of symbols.......................... Page 11

Cleaning and care ............................ Page 14

Storing ......................................... Page 14

Disposal........................................ Page 15

Service ......................................... Page 15

4 GB/CY

MULTI-PURPOSE TOOL ACCESSORIES

Introduction

We congratulate you on the purchase of your new product. You have

chosen a high quality product. Familiarise yourself with the product

before using it for the ﬁrst time. In addition, please carefully refer to the

operating instructions and the safety advice below. Only use the product

as instructed and only for the indicated ﬁeld of application. Keep these

instructions in a safe place. If you pass the product on to anyone else,

please ensure that you also pass on all the documentation with it.

Intended use

This product is not intended for commercial use.

This product is intended for sawing, cutting and grinding. The following

materials are preferable for processing: wood, plastic, drywall elements,

light and non-ferrous metals, fasteners (e.g. nails, screws) and wall tiles.

It is particularly suitable for near-edge and ﬂush work. Any other usage

is considered improper and carries a signiﬁcant risk of accidents. The

manufacturer accepts no responsibility for damage(s) resulting from

improper usage.

5GB/CY

Scope of delivery

HG08989A: 1x Z85 C3 HSS Segment Saw Blade

1x Z32 C3 HCS Plunge-cut Saw Blade

20x Z80 A2 20 hook & loop sanding papers

1x Z52 A1 Stainless Steel Scraper

HG08989B: 1x Z52 A1 Stainless Steel Scraper

1x Z64 B2 Diamond Disc

1x Z79 B2 Triangular RIFF Sanding Plate

10x Z80 A2 10 pieces of Hook & Loop

Sanding Paper

Safety instructions

Personal safety

Use personal protective equipment. Always wear eye protection.

Protective equipment such as dust mask, non-skid safety shoes, hard

hat, or hearing protection used for appropriate conditions will reduce

personal injuries.

6 GB/CY

Do not overreach. Keep proper footing and balance at all times. This

enables better control of the power tool in unexpected situations.

Dress properly. Do not wear loose clothing or jewellery. Keep your

hair, clothing and gloves away from moving parts. Loose clothes and

gloves away from moving parts. Loose clothes, jewellery or long hair

can be caught in moving parts.

Safety instructions for all types of use

Only use equipment expressly intended for use with this tool set and

recommended by the manufacturer.

The exterior diameter and thickness of the attachment must correspond

to the size requirements of your power tool. Incorrectly measured

attachments cannot be suﬃciently shielded or controlled.

All attachments must ﬁt exactly on your power tool’s reception spindle.

Attachments that do not ﬁt exactly on your power tool’s reception

spindle cause a loss of control.

Do not use any damaged attachments. Before use, always check your

attachments for damages. Check grinding disks for tears or high wear.

7GB/CY

If you drop a power tool or attachment, check it for damages or use

undamaged attachments. You and all people in your vicinity should

keep on a diﬀerent level as the oscillating attachment as soon as you

have mounted it.

Make sure that anyone who enters your workspace is wearing

appropriate personal protective clothing. Broken pieces of the object

you are working on or broken pieces from your tool attachments may

ﬂy around and cause injury even outside your direct working vicinity.

Keep the power cable away from all oscillating tool attachments. If

you lose control of the device, the power cable may be severed or

caught, causing the oscillating attachment to come into contact with

your hand or arm.

Allow all tool attachments to come to a complete stop before setting

down your power tool. Oscillating attachments may come into contact

with the surface. This may cause you to lose control of the power tool,

leading to injury of yourself or others.

Turn oﬀ the power tool when carrying it about. Your clothing may

otherwise become tangled up in the oscillating attachment, causing

personal injury.

Do not use the power tool near ﬂammable materials. Sparks may

ignite such materials.

8 GB/CY

Kickback and related safety instructions

Kickback is a sudden reaction arising when an oscillating power tool

attachment.

Kickback is the result of improper use of the power tool. Heed the

following safety precautions to prevent kickback:

Always maintain a ﬁrm grip on the power tool and use any available

additional handle to better control kickback.

Keep your hands away from oscillating tool attachments

at all times. The attachment may come into contact with your hand

in case of kickback.

Keep your body out of the area that the power tool

would enter in case of kickback. Exercise extreme

caution when working on corners, sharp edges, etc.

Prevent your tool attachments from jumping back from

the workpiece and jamming. The oscillating tool attachment

tends to jam when working on corners, sharp edges or when it jumps

back from the workpiece. This leads to loss of control or kickback.

9GB/CY

Use

Before use

Always check the tools for damages before use.

Do not use any damaged tools.

Rust build-up or other signs of chemical or mechanical alteration to the

ﬁtting equipment may cause premature failure of the tool.

Before use, please study the manual of the power tools.

Sawing / Cutting

Use only undamaged saw blades that are in perfect working order.

Bent, blunt or otherwise damaged saw blades may break.

When sawing lightweight construction materials, follow the statutory

regulations and all recommendations from the material manufacturers.

Only soft materials such as wood, plasterboard or similar should be

processed using the plunge saw process.

Sanding

To prolong the service life of the sanding sheets, ensure that you apply

even pressure.

Ensure that your workplace is adequately ventilated.

Sanding sheets are attached to the sanding pad by means of the hook

and loop fastening.

Before ﬁtting a new sanding sheet, remove any dust and dirt from the

sanding pad.

10 GB/CY

Instructions for mounting

Follow the instructions included with the machine to mount grinding/

buﬃng tools and brushes.

Make sure to use the tools only with devices that have an appropriate

tool attachment.

After mounting, always do a small test run.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Parkside Werkzeuge Handbücher

Parkside

Parkside PSS 65 C1 Bedienungs- und Montageanleitung

Parkside

Parkside PDST 10 B3 Bedienungsanleitung

Parkside

Parkside 73782 Bedienungsanleitung

Parkside

Parkside PAMFW 12 C3 Bedienungsanleitung

Parkside

Parkside PAMFW 12 E4 Bedienungsanleitung

Parkside

Parkside PEH 30 C3 Bedienungsanleitung

Parkside

Parkside PDSP 1000 E6 Bedienungsanleitung

Parkside

Parkside 365023 2204 Bedienungsanleitung

Parkside

Parkside PDLA 6.3 A1 Bedienungsanleitung

Parkside

Parkside PSS 65 A1 Bedienungsanleitung

Parkside

Parkside PDST 10 B3 Bedienungsanleitung

Parkside

Parkside PDSS A1 Bedienungsanleitung

Parkside

Parkside PDT 40 C2 Bedienungsanleitung

Parkside

Parkside PDSS 13 D4 Bedienungsanleitung

Parkside

Parkside 275674 Bedienungsanleitung

Parkside

Parkside PDMH 4500 A2 Kurzanleitung

Parkside

Parkside PGG 15 A1 Bedienungsanleitung

Parkside

Parkside PAMFW 10.8 A1 Bedienungsanleitung

Parkside

Parkside PKGA 20-Li C2 Bedienungsanleitung

Parkside

Parkside 96896 Bedienungsanleitung

Parkside

Parkside PDS 30 A1 Bedienungsanleitung

Parkside

Parkside PDT 40 B2 Bedienungsanleitung

Parkside

Parkside PSS 65 A1 Bedienungsanleitung

Parkside

Parkside PDMH 4500 A2 Bedienungsanleitung

Beliebte Werkzeuge Handbücher anderer Marken

Martor

Martor SECUNORM 175 Bedienungsanleitung

ERKCO

ERKCO 1000 Bedienungsanleitung

jbc

jbc N4473 Bedienungsanleitung

FEINMETALL

FEINMETALL FZWZ-SET-001 Bedienungsanleitung

Worx Professional

Worx Professional Sonicrafter WU676 Bedienungsanleitung

Gage Bilt

Gage Bilt GB713SH Bedienungsanleitung

Hilti

Hilti DX 9-ENP Bedienungsanleitung

norbar

norbar NORTRONIC 34399 Bedienungsanleitung

BGS technic

BGS technic 8578 Bedienungsanleitung

Makita

Makita DHR241 Bedienungsanleitung

Motor Guard

Motor Guard JMB-1250 Bedienungsanleitung

Power Adhesives

Power Adhesives 805-12 Bedienungsanleitung

Clemco

Clemco 24189 Bedienungsanleitung

VVG

VVG VNG 903 Series Bedienungsanleitung

Hilti

Hilti FX 3-A Bedienungsanleitung

axing

axing BWZ 5-02 Bedienungsanleitung

Dh-Robotics

Dh-Robotics RGI-100 Anleitung zur Verwendung

Goobay

Goobay 97790 Bedienungsanleitung