Parktool PCS-4T Handbuch

Park Tool Co. www.parktool.com

PCS-4T Portable Trimmer Stand

Assembly and Setup

Assemble upper and lower leg tubes (#9 and #12) with

left and right elbows (#10 and #11) and bolts (#14) and

nuts (#15). Press end caps (#13) on lower legs.The end

caps are eccentric so they can be rotated to level the

PCS-4 on uneven surfaces (Figure 1).

Attach leg assemblies to upright weldment (#8) using

bolts (#14) and nuts (#15).Tighten bolts and nuts until

play is removed but legs are free to fold together for

storage (Figure 2).

Loosen socket head cap screw on sleeve assembly (#7).

Press sleeve assembly onto upright weldment (#8) so

half the sleeve ﬁts over the upright and half the sleeve

extends above the upright.Tighten socket head cap

screw with 4mm hex wrench but do not over tighten

(Figure 3).

Open quick release lever on sleeve assembly (#7). Install

extension tube (#6) into sleeve assembly and upright

weldment tube. Set extension tube at desired height and

close quick release lever to lock. If quick release assem-

bly does not securely lock extension tube, open quick re-

lease lever, tighten nut and close lever to lock (Figure 4).

Note: At least 7” of extension tube must be inserted into

the sleeve assembly and upright weldment tube.

Press nylon shim (#16) and top tube assembly (#4) onto

extension tube (#6).Tighten socket head cap screws (#5)

with 4mm hex wrench but do not over tighten (Figure 5).

Place tapered sleeve (#3) on tapered portion of clamp

(PCS-4-1 only). Place clamp (#1 or #2) in top tube assem-

bly (#4) and engage threads of handle with threads of

clamp.Turn handle clockwise to secure clamp (Figure 6).

Notes

• The clamp of the repair stand can be rotated 360

degrees, allowing easy access to any component

of the trimmer.To adjust the rotational angle of the

clamp, loosen the handle on the back of the top

tube assembly, rotate the clamp to the desired po-

sition and re-tighten the handle to lock the clamp.

• To avoid injury and/or damage to the trimmer or

the stand, always remove the trimmer from the

stand before making height adjustments.

Part No. Description Qty.

100-5CT Adjustable Linkage Clamp 1

469 Jaw Cover Set 1

149 Tapered Sleeve 1

939C Universal Top Tube Assembly 1

943-1/944

M5 x 25 Socket Head Cap Screw with 5mm nut

927 Extension Tube 1

928A Sleeve Assembly 1

185-2R Upright Weldment 1

Part No. Description Qty.

472-2 23” Upper Leg Tube 2

474-2L Left Elbow 2

473-2R Right Elbow 2

475-2 26” Lower Leg Tube 2

190-2 Leveling End Cap 4

479-6 Hex Head Bolt 1/4 - 20 x 2 6

480-6 Jam Nylok Nut 1/4 - 20 6

926 Nylon Shim 1

11 13

Park Tool Co. www.parktool.com

PCS-4T Portable Trimmer Stand

Figure 1 Figure 2 Figure 3

Figure 4 Figure 5 Figure 6

4mm

open

lock

4mm 1

Park Tool Co. 6 Long Lake Rd. St. Paul, MN 55115 (USA) www.parktool.com

100-3CT & 100-5CT Adjustable

Linkage Repair Stand Clamp

Part No. Description Qty.

138 Handle Grip 1

103S Handle 1

107S-2 Pin with Washer and Circlip 2

101-3 Moveable Jaw 1

469 Jaw Cover Set (Includes Circlips) 1

102-3 Rotating Shaft (100-3C clamp only) 1

102-5 Rotating Shaft (100-5C clamp only) 1

Part No. Description Qty.

108S-2 Pin with Washers and Circlip 1

117S-1 Eyebolt 1

118S Adjusting Barrel 1

121S Adjusting Barrel Pivot 1

136 Nut 1/4” - 28 1

122S

Linkage Assembly, Includes Items 8 through 11

116S Cap Screw 2

Andere parktool Rack & Stand Handbücher

parktool

parktool PCS-10.2 Bedienungsanleitung

parktool

parktool PRS-25 Bedienungsanleitung

parktool

parktool PCS-10.2 Bedienungsanleitung

parktool

parktool TS-4 Bedienungsanleitung

parktool

parktool PRS-2 OS-1 Bedienungsanleitung

parktool

parktool PCS-10 Bedienungsanleitung

parktool

parktool TS-25 Bedienungsanleitung

parktool

parktool TS-RK Bedienungsanleitung

parktool

parktool PRS-7 Series Bedienungsanleitung

parktool

parktool PRS-3 OS Bedienungsanleitung

parktool

parktool PRS-2.2 Series Bedienungsanleitung

parktool

parktool PRS-3M Bedienungsanleitung

parktool

parktool PRS-4 OS-1 Bedienungsanleitung

parktool

parktool PRS-4W Bedienungsanleitung

parktool

parktool PRS-33 Bedienungsanleitung

parktool

parktool PRS-3 OS-2 Bedienungsanleitung

parktool

parktool PRS-15 Bedienungsanleitung

parktool

parktool PRS-4.2 Series Bedienungsanleitung

parktool

parktool PCS-10.2 Bedienungsanleitung

parktool

parktool PRS-33 Bedienungsanleitung

parktool

parktool PRS-26 Bedienungsanleitung

parktool

parktool PRS-20 Bedienungsanleitung

parktool

parktool PCS-4 Series Bedienungsanleitung

parktool

parktool PCS-9.2 Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung

parktool PCS-4T Handbuch

Beliebte Rack & Stand Handbücher anderer Marken