Parktool PRS-3M Bedienungsanleitung

Park Tool Co. 5115 Hadley Ave. N., St. Paul, MN 55128 (USA) www.parktool.com

PRS-3M

Deluxe Single Arm Repair Stand

A B C D E F

Assembly

A.Attach base support upright (#2) to steel base (#15) using four

button head cap screws (#6), 3/16”washers (#8) and 1/4-20 hex

nuts (#9). Place lock block assembly without spring (#5) into

square tube on base support upright.

B.Install locking pin (#12) in one of three positioning holes on

upright tube (#7) and slide into base support upright (#2). Tighten

handle of lock block assembly (#5) to secure upright tube.

C. Slide aluminum tool tray (#14) onto upright tube (#7), leaving at

least a 2” gap between tray and locking pin (#12). Tighten set

screw in tray to secure.

D.Attach horizontal tube (#3) to upright tube (#7) using 7/16” hex

head bolt (#10) and 7/16” washer (#11).

E. Place lock block assembly with spring (#4) into square tube

on horizontal tube (#3). Press end cap (#13) into top of upright

tube (#7).

F. Place clamp (#1) into horizontal tube (#3) and tighten handle of

lock block assembly (#4) to secure.

For safety and stability, the clamp (#1) and horizontal tube (#3) should always extend directly over the middle of the base (#15).

Park Tool Co. 5115 Hadley Ave. N., St. Paul, MN 55128 (USA) www.parktool.com

Clamp Rotational Adjustment

The clamp can be rotated 360 degrees, allowing easy access to any component. To adjust the angle of the clamp:

A.Loosen handle on lock block assembly

(#4) in horizontal tube (#3).

B.Rotate 100-3D clamp to desired position. C. Retighten handle of lock block assembly

(#4) to secure clamp.

AB C

Height Adjustment

The PRS-3M has three height adjustment positions. To adjust the height:

A.Remove any clamped component or part from repair stand.

Hold upright tube (#7) ﬁrmly and loosen handle of lock block

assembly (#5) in base support upright (#2).

B.Continue to hold upright tube (to prevent it from dropping) and

pull locking pin (#12) from upright tube (#7).

C. Raise or lower upright tube (#7)

D.Reinstall locking pin (#12) into desired height adjustment hole.

E. Retighten handle of lock block assembly (#5).

5 5

A B C D E

Notes

• For bolting the repair stand directly to the ﬂoor, use the Park Tool FP-2 Floor Plate (sold separately).

PRS-3M

Deluxe Single Arm Repair Stand

Park Tool Co. 5115 Hadley Ave. N., St. Paul, MN 55128 (USA) www.parktool.com

PRS-3M

Deluxe Single Arm Repair Stand

Part No. Description Qty.

100-3D Micro Adjust Clamp 1

125B.2 Base Support Upright 1

124A Horizontal Tube 1

180 Lock Block Assembly (with spring) 1

180-2 Lock Block Assembly (without spring) 1

133S Button Head Cap Screw 1/4”-20x 7/8” 4

125A Upright Tube 1

132S Washer, 3/16” 4

Part No. Description Qty.

131S Hex Nut, 1/4”-20 4

128B Hex Head Bolt, 7/16”-14x 2-1/2” 1

128-3 Flat Washer, 7/16” 1

123 Locking Pin 1

179A End Cap 1

105 Aluminum Tool Tray 1

130 Steel Base (sold separately) —

PRS-3M Part Numbers

Park Tool Co. 5115 Hadley Ave. N., St. Paul, MN 55128 (USA) www.parktool.com

100-3D Micro-Adjust

Repair Stand Clamp

100-3D Micro-Adjust Repair Stand Clamp

Part No. Description Qty.

1957 Moveable Jaw 1

1955 Main Body 1

1951 Threaded Bullet 1

1962X Non Threaded Barrel 1

1961X Threaded Barrel 1

1963X Clamp Screw 1

1960 Jaw Cover Set 1

1950L Donut 1

1808X Clamp Handle Spacer 1

1959 Clevis Pin 1

467-1 Jaw Cover Clip 4

107-2 E-Clip 1

Part No. Description Qty.

1809X Nylon Washer 1

1967 Cam Handle Knob 1

1966 Cam Handle 1

1956 Saddle Cradle 1

1965 Handle Screw Cap 1

1958 Clamp Spring 1

1964 Handle Screw 1

1968 Clamp Knob Screw 1

1954L Socket Head Cap Screw 1

1948-2 Saddle Nose Cover Screw 2

1953L Sleeve 1

1949 Extension Bolt 1

Andere parktool Rack & Stand Handbücher

parktool

parktool ES-1 Bedienungsanleitung

parktool

parktool PRS-2.2 Series Bedienungsanleitung

parktool

parktool TS-7M Bedienungsanleitung

parktool

parktool PRS-25 Bedienungsanleitung

parktool

parktool PRS-4 OS-1 Bedienungsanleitung

parktool

parktool PRS-25 Bedienungsanleitung

parktool

parktool PRS-2.3 Series Bedienungsanleitung

parktool

parktool PRS-20 Bedienungsanleitung

parktool

parktool PCS-10.3 Bedienungsanleitung

parktool

parktool TS-4 Bedienungsanleitung

parktool

parktool PRS-2 OS-1 Bedienungsanleitung

parktool

parktool PRS-4W-1 Bedienungsanleitung

parktool

parktool PRS-25 Bedienungsanleitung

parktool

parktool PRS-15 Bedienungsanleitung

parktool

parktool PRS-3 OS-1 Bedienungsanleitung

parktool

parktool PRS-22.2 Bedienungsanleitung

parktool

parktool TS-25 Bedienungsanleitung

parktool

parktool PRS-3 OS-2 Bedienungsanleitung

parktool

parktool PRS-3 OST Bedienungsanleitung

parktool

parktool PCS-4T Handbuch

parktool

parktool PCS-9.3 Bedienungsanleitung

parktool

parktool PRS-33.2 Bedienungsanleitung

parktool

parktool PCS-10 Bedienungsanleitung

parktool

parktool PRS-7 Series Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung

parktool PRS-3M Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken