Paslode T250A-F16 Bedienungsanleitung

T250A-F16, P94225

16 Gauge Angled

Finish Nailer

IMPORTANT!

DO NOT DESTROY

It is the customer’s responsibility to have all

operators and service personnel read and

understand this manual.

OPERATING MANUAL AND

SCHEMATIC

T250A-F16

500910

Piston Assembly

#501460

11 12

21 20

34 35

38 39

Follower

Assembly

#501457

Valve Assembly

#501459

Latch

Assembly

#501461

OPTIONAL:

Bump

Trigger

Assembly

#501048

WARNING

All parts must be periodically inspected and

replaced if worn or broken. Failure to do this can

affect the tool’s operation and present a safety

hazard.

P94225

1 501043 1 T.H.S.C.S. 1/4-20 x 1/2

2 500921 1 Deflector

3 501332 4 S.H.C.S. 10x24 x 7/8

4 500909 1 Cap

*5 500927 1 Gasket

6 500913 1 Piston Stop

7 501288 1 Spring, Main Valve

*8 091023 2 O -Ring

*9 095406 1 O -Ring

10 501277 1 Main Valve Assembly

11 405430 1 O -Ring

12 500911 1 Piston

13 401130 1 Driv Lok Pin

14 500920 1 Driver Blade

15 091863 1 O -Ring

16 500369 1 O -Ring

17 500907 1 Sleeve

18 500917 1 Bumper

19 501404 1 Blade Seal

20 500908 1 Housing

21 501141 1 Label, Logo R

22 501140 1 Label, Logo L

23 026133 2 Roll Pin

24 501757 1 Spring

25 097748 1 Spring

26 097746 1 Pin Valve

27 092174 1 O -Ring

28 401958 1 Valve Body

29 501755 1 Adjustment Knob

30 500937 1 Brad Chanel

31 501039 1 Sequential Trigger

PARTS LEGEND T250A-F16, P94225, 500910

* Denotes Normal Wear Items.

** Make sure Warning Label (501302) is properly affixed.

Replace if necessary.

Label available at no charge through the Service Parts Dept.

DO NOT EXCEED MAXIMUM

RECOMMENDED AIR PRESSURE

120

Always wear hearing protection and eye protection

devices, including side shields when operating or

working in the vicinity of a tool.

Operate the tool using only the recommended air

pressure. Do not exceed the maximum air pressure

marked on the tool. Be sure the air pressure gauge is

operating properly and check it at least twice a day.

SAFETY INSTRUCTIONS

WEAR EYE AND HEARING PROTECTION

32 500940 1 Wire Belt Hook

33 501324 4 S.H.C.S. 10-24 x 3/4

34 501316 1 Pin Dowel

35 501301 1 Nose

36 500918 1 Front Plate

37 500924 1 Latch Clamp Spring

38 500923 1 Clamp Spring

39 404659 2 Roll Pin

40 402730 1 Pin

41 500939 1 Quick Clear Cover

42 501754 1 Upper W.C.E.

43 501753 1 Lower W.C.E.

44 500936 1 No-Mar Tip

45 501414 1 Spring, W.C.E.

46 402963 1 O -Ring

47 500928 1 End Plug

48 501756 1 Pin

49 501362 1 Rail, Magazine

50 500933 1 Follower

51 501150 1 Pull Back Lever

52 500944 1 Negator Spring

53 501148 1 Follower Core Assembly

54 501225 1 Follower Pin

55 500934 1 Spring, Follower

56 501224 1 Screw, #8-16 x 5/8 Plastite

57 501458 1 Right & Left Handle Kit

58 501223 2 Screw, #8-16 x 7/8 Plastite

59 501311 1 Nameplate

60 501302 1 Warning Label

61 501398 1 Torsion Spring, Quick Clear

62 402669 1 Trigger Pin

63 402668 1 Retaining Ring

Never use any bottled air or gases such as

oxygen to operate the tool since they could cause

the tool to explode.

AIR CONSUMPTION CHART

AIR CONSUMPTION - SCFM/FASTENER

70 80 90 100 110 120

.050

.045

.040

.035

.030

.040

AIR PRESSURE - PSIG

➔

Grey PNs Unavailable ANZ. Blue PNs Unavailable AU.

Contact Trip Trigger Kit

The T250A-F16 comes with a Sequential Fire Trigger installed on the

tool. Using the Sequential Trigger, the user must fully depress the

work contact element (w.c.e) before squeezing the trigger and

successfully firing the tool. An optional Contact Trip Trigger,

designed for "bump" or "bounce" firing, is an included accessory.

Using the Contact Trip Trigger, the user is able to successively fire

fasteners by squeezing and holding the trigger and then "bumping" the

w.c.e. along the workpiece. Instructions for changing to the contact

trip trigger are included. Part No. 501048

ACCESSORIES

PRINTED IN U.S.A.

405653-2

03/06

Andere Handbücher für T250A-F16

Dieses Handbuch passt für folgende Modelle

Andere Paslode Nagelpistole Handbücher

Paslode

Paslode FN 1665 Bedienungsanleitung

Paslode

Paslode F250S-PP Bedienungsanleitung

Paslode

Paslode FN1665.1 Bedienungsanleitung

Paslode

Paslode PF 90 S Bedienungsanleitung

Paslode

Paslode 901000 Bedienungsanleitung

Paslode

Paslode PSN50NP Bedienungsanleitung

Paslode

Paslode CF325Li Bedienungsanleitung

Paslode

Paslode 900420 Bedienungsanleitung

Paslode

Paslode F325R Bedienungsanleitung

Paslode

Paslode IM250A-Li2 Bedienungsanleitung

Paslode

Paslode PF350-S Bedienungsanleitung

Paslode

Paslode IM350 Bedienungsanleitung

Paslode

Paslode 575057 Bedienungsanleitung

Paslode

Paslode Impulse PPN35i Bedienungsanleitung

Paslode

Paslode IM65 Bedienungsanleitung

Paslode

Paslode RINGfast A515 Bedienungsanleitung

Paslode

Paslode CF325XP Bedienungsanleitung

Paslode

Paslode 360Xi Bedienungsanleitung

Paslode

Paslode IM200 F18 Bedienungsanleitung

Paslode

Paslode CNW45R Bedienungsanleitung

Paslode

Paslode Positive Placement PF150S-PP Bedienungsanleitung

Paslode

Paslode TrimMaster IM250A-Li Bedienungsanleitung

Paslode

Paslode T200-F18 Bedienungsanleitung

Paslode

Paslode IM250A-Li2 Handbuch

Beliebte Nagelpistole Handbücher anderer Marken

Performance Tool

Performance Tool M643 Bedienungsanleitung

Hitachi

Hitachi VH650 - Fencing Nailer, Full Head Bedienungsanleitung

Parkside

Parkside PET 25 B1 Bedienungsanleitung

Senco

Senco Fusion Technology F-35XP Bedienungsanleitung

Grizzly

Grizzly G1847 Bedienungsanleitung

Ryobi

Ryobi R18N18G Bedienungsanleitung

Black & Decker

Black & Decker 492848-00 Bedienungsanleitung

HOLZMANN MASCHINEN

HOLZMANN MASCHINEN TN90 Bedienungsanleitung

Metabo HPT

Metabo HPT NR 3690DC Bedienungsanleitung

Surtek

Surtek CN650 Abmessungen und Installationsanleitung

Makita

Makita GF600 Bedienungsanleitung

Parkside

Parkside PET 25 B1 Bedienungsanleitung

Senco

Senco AirFree 25 Bedienungsanleitung

Freeman

Freeman P50LSLW Bedienungsanleitung

Aicon PRO

Aicon PRO DAC4507 Bedienungsanleitung

Makita

Makita AN923 Bedienungsanleitung

Grizzly

Grizzly T20644 Bedienungsanleitung

Black & Decker

Black & Decker 90514937 Bedienungsanleitung