Patton electronics 1194 Bedienungsanleitung

USER

MANUAL

MODEL 1194

Single Mode Fiber

Modem With Four

Fixed E1/T1

Interfaces

SALES OFFICE

(301) 975-1000

TECHNICAL SUPPORT

(301) 975-1007

Part# 07M1194-A

Doc# 017151UA

Released 06/04/01

An ISO-9001

Certiﬁed

Company

CERTIFIED

TABLE OF CONTENTS

1.0 Warranty Information .................................................................. 4

1.1 Industry Canada Notice................................................................ 4

1.2 FCC Information ........................................................................... 5

1.3 DC Power Notice.......................................................................... 5

1.4 Patton Contact Information........................................................... 6

1.5 FCC Part 68 Compliance Statement (1194/T1)............................ 6

1.6 CE Notice...................................................................................... 7

1.7 Service.......................................................................................... 7

2.0 General Information..................................................................... 8

2.1 Features........................................................................................ 8

2.2 Description.................................................................................... 8

3.0 Configuration............................................................................. 10

3.1 Configuring the Hardware DIP Switches .................................... 10

Configuring DIP switch S1.......................................................... 11

Switch S1-1: Line Coding Options ....................................... 11

Switches S1-2 and S1-3: Line Build Out ............................. 12

Switches S1-6 and S1-7: Clock Mode ................................. 12

Configure DIP switch S2............................................................. 13

Switch S2-1: Local/Remote Loop ........................................ 13

Switch S2-7: Response to RDL ........................................... 13

Switch S2-8: Front Panel Switches ..................................... 13

4.0 Installation.................................................................................. 14

4.1 Connect the G.703/G.704 or T1 Network................................... 14

4.2 Connect the Fiber Interface........................................................ 14

4.3 Power Connection ...................................................................... 15

Connecting to an AC Power Source........................................... 15

Connecting to a DC Power Source............................................. 16

5.0 Power-up .................................................................................... 17

6.0 LED Status Monitors ................................................................. 18

7.0 Test Modes................................................................................. 19

7.1 Local Loopback Test................................................................... 19

7.2 Remote Loopback Test............................................................... 20

7.3 The V.52 Test Pattern Generator ............................................... 21

A Model 1194 Quad E1/T1 to Single Mode

Fiber Specifications................................................................... 22

A.1 Configuration ...............................................................................22

A.2 Clocking Modes ...........................................................................22

A.3 Network ports specifications .......................................................22

Network Line Rate...................................................................... 22

Transmit Line Buildout (T1)........................................................ 22

Interface...................................................................................... 22

Line coding................................................................................. 22

Isolation...................................................................................... 22

Physical Connection................................................................... 22

A.4 Fiber Port Specifications ..............................................................23

Fiber Line Coding....................................................................... 23

Fiber Physical............................................................................. 23

A.5 Diagnostics ..................................................................................23

A.6 Compliance .................................................................................23

A.7 Laser Safety .................................................................................23

A.8 Network Line Interface .................................................................23

A.9 Power ...........................................................................................23

A.10 Temperature Range .....................................................................23

A.11 Altitude .........................................................................................23

A.12 Humidity .......................................................................................24

A.13 Dimensions ..................................................................................24

A.14 Weight ..........................................................................................24

A.15 Mean Time Between Failure (MTBF) ...........................................24

1.0 WARRANTY INFORMATION

Patton Electronics

warrants all Model 1194 components to be free from

defects, and will—at our option—repair or replace the product should it

fail within one year from the ﬁrst date of shipment.

This warranty is limited to defects in workmanship or materials, and does

not cover customer damage, abuse or unauthorized modiﬁcation. If this

product fails or does not perform as warranted, your sole recourse shall

be repair or replacement as described above. Under no condition shall

Patton Electronics

be liable for any damages incurred by the use of this

product.These damages include, but are not limited to, the following:lost

proﬁts, lost savings and incidental or consequential damages arising

from the use of or inability to use this product.

Patton Electronics

spe-

ciﬁcally disclaims all other warranties, expressed or implied, and the

installation or use of this product shall be deemed an acceptance of

these terms by the user.

1.1 INDUSTRY CANADA NOTICE

The Canadian Department of Communications label identiﬁes certiﬁed

equipment.This certiﬁcation means that the equipment meets certain

telecommunications network protective, operational and safety require-

ments.The Department does not guarantee the equipment will operate

to the user's satisfaction. Before installing this equipment, users should

ensure that it is permissible to be connected to the facilities of the local

telecommunications company.The equipment must also be installed

using an acceptable method of connection.In some cases, the com-

pany’s inside wiring associated with a single line individual service may

be extended by means of a certiﬁed connector assembly (telephone

extension cord).The customer should be aware that compliance with the

above condition may not prevent degradation of service in some situa-

tions.Repairs to some certiﬁed equipment should be made by an autho-

rized maintenance facility designated by the supplier. Any repairs or

alterations made by the user to this equipment, or equipment malfunc-

tions, may give the telecommunications company cause to request the

user to disconnect the equipment.Users should ensure for their own pro-

tection that the ground connections of the power utility, telephone lines

and internal metallic water pipe system, are connected together.This

protection may be particularly important in rural areas.

1.2 FCC INFORMATION

This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules.These limits

are designed to provide reasonable protection against harmful interfer-

ence when the equipment is operated in a commercial environment.This

equipment generates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in

which case the user will be required to correct the interference at his own

expense.If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected

1.3 DC POWER NOTICE

Connect the equipment to a 36–60 volts direct-current (VDC), 340 mA

source that is electrically isolated from the AC source.The 36–60 VDC

source

must

be connected to a reliable earth ground.

Caution

Users should not attempt to make such connections

themselves, but should contact the appropriate electric

inspection authority, or electrician, as appropriate.

Caution

Use of controls or adjustments or performance of

procedures other than those speciﬁed herein may result

in hazardous laser radiation exposure.

An approved external SELV power supply that incorporates a disconnect

device must be used and positioned within reach of the operator’s position.

1.4 PATTON CONTACT INFORMATION

If you have any trouble operating the Model 1194, please contact

Patton

ElectronicsTechnical Support

301-975-1000

.The telephone com-

pany may ask you to disconnect the equipment from the telephone net-

work until the problem has been corrected or until you are certain that

the Model 1194 is not malfunctioning.In accordance with FCC rules and

regulation CFR 47 68.218(b)(6), you must notify the telephone company

prior to disconnection.

The following information may be required when applying to your local

telephone company for leased line facilities.The Universal Service Order

Code (USOC) is RJ-48C.The Facility Interface Codes (FIC) are 04DU9-

BN, 04DU9-DN, 04DU9-1KN, and 04DU9-1SN.The Service Order Code

(SOC) is 6.0N.

1.5 FCC PART 68 COMPLIANCE STATEMENT (1194/T1)

This equipment complies with Part 68 of FCC Rules. Please note the

following:

1. You are required to request service from the telephone company

before you connect the CSU to a network.When you request ser-

vice, you must provide the telephone company with the following

data.When you requestT1 Service, you must provide the telephone

company with the Facility Interface Code.Provide the telephone

company with both of the following codes: 04DU9-B (1.544 MB D4

framing format) and 04DU9-C (1.544 MB ESF format).The tele-

phone company will select the code it has available.The Service

Order Code(s) (SOC): 6.0N.The required Universal Service Order

Code (USOC) jack:RJ 48C.The make, model number, and FCC

Registration number of the CSU.

Service Facility

Interface

Code

Service

Code Network

Connection

1.544 Mbps SF format without line

power 04DU9-BN 6.0N RJ48C

1.544 Mbps SF and B8ZS without line

power 04DU9-DN 6.0N RJ48C

1.544 Mbps ANSI ESF without line

power 04DU9-1KN 6.0N RJ48C

1.544 Mbps ANSI ESF and B8ZS

without line power 04DU9-1SN 6.0N RJ48C

2. Your telephone company may make changes to its facilities, equip-

ment, operations, or procedures that could affect the proper func-

tioning of your equipment.The telephone company will notify you in

advance of such changes to give you and opportunity to maintain

uninterrupted telephone service.

3. If your CSU causes harm to the telephone network, the telephone

company may temporarily discontinue your service. If possible, they

will notify you in advance, but if advance notice is not practical, you

will be notiﬁed as soon as possible and will be informed of your right

to ﬁle a complaint with the FCC.

4. If you experience trouble with the CSU, please contact Patton Elec-

tronics, Co. for service or repairs. Repairs should be performed only

by Patton Electronics Co.

5. You are required to notify the telephone company when you discon-

nect the CSU from the network.

1.6 CE NOTICE

The CE symbol on your Patton Electronics equipment indicates that it is

in compliance with the Electromagnetic Compatibility (EMC) directive

and the Low Voltage Directive (LVD) of the European Union (EU). A Cer-

tiﬁcate of Compliance is available by contactingTechnical Support.

1.7 SERVICE

All warranty and non-warranty repairs must be returned freight prepaid

and insured to Patton Electronics. All returns must have a Return Materi-

als Authorization number on the outside of the shipping container.This

number may be obtained from Patton Electronics Technical Service at:

tel:

(301)975-1007

E-mail:

[email protected]

URL:

www.patton.com

Note

Packages received without an RMA number will not be

accepted.

Patton Electronics’technical staff is also available to answer any questions

that might arise concerning the installation or use of your Model 1194.

Technical Service hours:

8AM to 5PM EST, Monday through Friday

2.0 GENERAL INFORMATION

Thank you for your purchase of this Patton Electronics product.This

product has been thoroughly inspected and tested and is warranted for

OneYear parts and labor. If any questions or problems arise during

installation or use of this product, please do not hesitate to contact

Patton ElectronicsTechnical Support at (301) 975-1007

2.1 FEATURES

• Four ITU G.703 (E1) or T1 channels over single-mode ﬁber

• Full duplex operation over a single strand of ﬁber

• Single-mode ﬁber with max distance 15.5 miles (25.0 km)

• Two ﬁber connection options available:FC or SC

• Clocking options: Internal, Network, or Receive Recover (ﬁber link)

• Local/remote loops:V.52 compliant 511/511E test patterns on each port

• 120-Ohm RJ-48C E1 or 100-Ohm T1 terminations

• AMI, HDB3 (E1), or B8ZS (T1) line coding

• 19 front panel LED status indicators: Fiber line, E1/T1 lines,Test

mode, Error, Loss, No Signal, and Power.

2.2 DESCRIPTION

The Model 1194 (see Figure 1) enables service providers to offer cost

effective extension (see Figure 2 on page 9) and distribution of four T1/

E1 network circuits from a Telco’s Central Ofﬁce to a point of presence

(POP), or in back-haul type operation linking CSU/DSUs, PABXs, rout-

ers, or multiplexers located at remote sites.

Figure 1.

Model 1194

511

G.703/G.704 Test Modes

511E

ERR

G.703/G.704

Fiber

Link

Model 1194ESingle ModeFiber - QuadG.703/G.704Modem

Power

Figure 2.

Network extension between remote locations

Using a laser transmitter (1300nm) and a single-mode ﬁber (9/125 micro

meter), the Model 1194 offers a high speed, noise immune, full duplex ﬁber

link over a single strand of ﬁber with a reach of up to 15.5 miles (25.0 km).

The Model 1194 is available in two versions: 1194/T1 and 1194/E1, for

connection to T1 and E1 circuits respectively. Features include AMI,

B8ZS/HDB3 line coding; internal, network, and receiver recovered

clocks;all easily conﬁgured via DIP switches. Local/Remote loops and

V.52 compliant 511 test patterns are accessible via front panel switches,

allowing quick testing and troubleshooting of the Model 1194 transceiv-

ers, and ﬁber and network links.

The Model 1194 is equipped with 19 front panel LEDs that monitor

power, ﬁber, network, and diagnostic features status.

The single-mode ﬁber interface uses either an SC or FC ﬁber connector,

while the network interfaces are presented on RJ-48C connectors.

The Model 1194 offers options for universal input (100–240 VAC) and

48 VDC power supplies

Fiber Optic

Line

Modem Modem

E1/T1E1/T1

511

G.703/G.704TestModes

511E

ERR

G.703/G.704

Fiber

Link

Model1194ESingleModeFiber-QuadG.703/G.704Modem

Power

511

G.703/G.704TestModes

511E

ERR

G.703/G.704

Fiber

Link

Model1194ESingleModeFiber-QuadG.703/G.704Modem

Power

3.0 CONFIGURATION

The Model 1194 has 16 DIP switches that enable conﬁguration of the unit

for a wide variety of applications.This section describes location of the

switches and explains the different conﬁgurations.

3.1 CONFIGURING THE HARDWARE DIP SWITCHES

Using a small ﬂat-tip screwdriver, remove the protective cover located on

the underside of the Model 1194 (see Figure 3).

Figure 3.

Removing the cover to access DIP switches S1 and S2

Figure 4 shows the orientation of the DIP switches in the “ON”and“OFF”

positions.

Figure 4.

DIP switches S1 and S2

511

G.703/G.704 TestModes

511E

ERR

P4P3P2P1

G.703/G.704Fiber

Link

Model1194ESingleModeFiber-QuadG.703/G.704Modem

Power

511

G.703/G.704 TestModes

511E

ERR

P4P3P2P1

G.703/G.704Fiber

Link

Model1194ESingleModeFiber-QuadG.703/G.704Modem

Power

1234

5678

Push toggle up

for ON position

Switch toggle

Push toggle

down for

OFF position

1234

5678

1234

5678

1234

5678

1234

5678

Inhaltsverzeichnis

Andere Patton electronics Modem Handbücher

Patton electronics

Patton electronics OnSite 1052 Series Bedienungsanleitung

Patton electronics

Patton electronics 1050patton Bedienungsanleitung

Patton electronics

Patton electronics 1002S Bedienungsanleitung

Patton electronics

Patton electronics NetLink 1082/I Bedienungsanleitung

Patton electronics

Patton electronics 1193 Bedienungsanleitung

Patton electronics

Patton electronics IM2RC/F-128K Bedienungsanleitung

Patton electronics

Patton electronics 1088/K Bedienungsanleitung

Patton electronics

Patton electronics 1007 Bedienungsanleitung

Patton electronics

Patton electronics 1140 Bedienungsanleitung

Patton electronics

Patton electronics 1000 Bedienungsanleitung

Patton electronics

Patton electronics 1058 Bedienungsanleitung

Patton electronics

Patton electronics 1205 Bedienungsanleitung

Patton electronics

Patton electronics MODEL 1075 Bedienungsanleitung

Patton electronics

Patton electronics 1000P Bedienungsanleitung

Patton electronics

Patton electronics 1200P Bedienungsanleitung

Patton electronics

Patton electronics 1058 Bedienungsanleitung

Patton electronics

Patton electronics NetLink 1082 Bedienungsanleitung

Patton electronics

Patton electronics 1008 Bedienungsanleitung

Patton electronics

Patton electronics MODEL 1012AR Bedienungsanleitung

Patton electronics

Patton electronics NetLink 1095 Bedienungsanleitung

Patton electronics

Patton electronics 1020 Bedienungsanleitung

Patton electronics

Patton electronics 1058 Bedienungsanleitung

Patton electronics

Patton electronics 1089/I Bedienungsanleitung

Patton electronics

Patton electronics 1003S Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung

Zoom

Zoom 1070 Series Bedienungsanleitung