Paytel P6 Series Kurzanleitung zur Einrichtung

means without written permission by Payter BV.

P6X Mechanical Integration Guide

Document version : 1.0

Document status : Release

Date : 30-01-2017

Document ID : PTR-40-10-ML-C-0004-01

NOTICE

This manual contains intellectual property, including but not limited, to trade

secrets and know-how, operating procedure and production procedures that

belong solely to Payter B.V.

Disclosure and/or use and/or reproduction of any part of this document strictly

forbidden, except under a written license from Payter B.V.

Payter B.V.

Rozenlaan 115

3051 LP Rotterdam

The Netherlands

P6X Mechanical Integration Guide

Page 2 / 21

part of this document may be

reproduced in any form by

print, photo print, microfilm,

electronic copy or any other

means without written

permission by Payter BV.

Revision History

Rev

Change

Author

1.0

Initial Release

Payter

P6X Mechanical Integration Guide

Page 3 / 21

part of this document may be

reproduced in any form by

print, photo print, microfilm,

electronic copy or any other

means without written

permission by Payter BV.

Abbreviation list

Abbreviation

Description

Third Generation (mobile communication system)

CCI

Coffee Credit Interface

Direct Current

DHCP

Dynamic Host Control Protocol

DNS

Domain Name Server

EDGE

Enhanced Data for GSM (Global System for Mobile communication) Evolution

EMV

Europay Mastercard Visa

EVA

European Vending Association

GPRS

General Packet Radio Service (mobile communication system)

HSPA

High Speed Packet Access (mobile communication system)

Internet Protocol

LAN

Local Area Network

MDB

Multidrop Bus, Communications bus standard for Vending Machines

Miliseconds

PSP

Payment Service Provider

PVP

Payter Vending Protocol

RTP

Remote Terminal Protocol

SAM

Secure Authentication module

SDK

Software Development Kit

SIM

Subscriber Identification Module

USB

Universal Serial Bus

VMC

Vending Machine Controller

P6X Mechanical Integration Guide

Page 4 / 21

part of this document may be

reproduced in any form by

print, photo print, microfilm,

electronic copy or any other

means without written

permission by Payter BV.

Table of Contents

Revision History .............................................................................................. 1

1. Dimensions & Mounting......................................................................... 5

Device opening ................................................................................................................. 5

Mounting options ............................................................................................................. 6

Dimensions P68 The Arc ................................................................................................... 8

Dimensions P66 The Plane................................................................................................ 9

Dimensions The Angle Casing ......................................................................................... 10

Installation P66 Split ....................................................................................................... 11

Dimensions P66S Split Unit............................................................................................. 12

2. Technical Specifications ....................................................................... 13

3. Troubleshooting................................................................................... 14

Result Codes ................................................................................................................... 14

LAN troubleshooting....................................................................................................... 16

Mobile Internet troubleshooting .................................................................................... 18

4. Warnings ............................................................................................. 19

AC Adapter...................................................................................................................... 19

Terminal.......................................................................................................................... 19

5. Contact ................................................................................................ 19

6. Installation Guide................................................................................. 20

P6X Mechanical Integration Guide

Page 5 / 21

part of this document may be

reproduced in any form by

print, photo print, microfilm,

electronic copy or any other

means without written

permission by Payter BV.

1. Dimensions & Mounting

The majority of the Vending Machines have a provision for installing Payment Terminals.

The dimensions of the P6X Terminal series are based upon the EVA (European Vending

Association) standard.

Device opening

Mounting a P6X terminal series requires a device opening that complies to the EVA EPS –

Standard door model measurements (Fig. 19).

Fig. 19 –Dimensions of opening and weld studs(mm)

All Dimensions [mm] +/- 0.5mm

If no weld studs are available an optional mounting frame, with weld studs, can be ordered. Drill

mounting holes of 4 mm on the same positions as the indicated weld studs to allow mounting of

the frame.

P6X Mechanical Integration Guide

Page 6 / 21

part of this document may be

reproduced in any form by

print, photo print, microfilm,

electronic copy or any other

means without written

permission by Payter BV.

Mounting options

Installation option 1:

In case no weld studs are provided as indicated in Fig 19, Payter can provide a mounting frame

which can be secured through 4mm mounting holes, located at the indicated weld stud positions.

EVA Front Mounting Set Section View

Fig. 20

P66 Terminal

Frame

Vending Machine

P66

Metal environments will influence the performance of the contactless operating field. Please

ensure that the P66 terminals are not completely enclosed in a metal environment otherwise the

operating distance will be reduced. An offset of 5 mm along the sides and rear of the terminal

will provide enough distance. If you have any questions with regards to the mechanical

integration, please contact the Payter support desk.

P6X Mechanical Integration Guide

Page 7 / 21

part of this document may be

reproduced in any form by

print, photo print, microfilm,

electronic copy or any other

means without written

permission by Payter BV.

Installation option 2:

In case the vending machine comes with pre-installed studs the mounting frame is not required.

An additional cover plate can be ordered for a clean finish of the front.

The cover plate is secured with double sided adhesive for a strong connection.

Fig. 21 Terminal with cover plate

Front Cover

Vending Machine

P66

P6X Mechanical Integration Guide

Page 8 / 21

part of this document may be

reproduced in any form by

print, photo print, microfilm,

electronic copy or any other

means without written

permission by Payter BV.

Dimensions P68 The Arc

The thickness of the Vending Machine or cabinet should not exceed 10 mm to ensure a

proper magnetic stripe card swipe.

Fig. 22 –P68 The Arc Measurements

P6X Mechanical Integration Guide

Page 9 / 21

part of this document may be

reproduced in any form by

print, photo print, microfilm,

electronic copy or any other

means without written

permission by Payter BV.

Dimensions P66 The Plane

Fig. 23 –P66 The Plane Measurements

P6X Mechanical Integration Guide

Page 10 / 21

part of this document may be

reproduced in any form by

print, photo print, microfilm,

electronic copy or any other

means without written

permission by Payter BV.

Dimensions The Angle Casing

All dimensions are in mm.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Zahlungsterminal Handbücher anderer Marken

PAX

PAX D180SRF Bedienungsanleitung

LinkPoint

LinkPoint AIO Bedienungsanleitung

Moneris

Moneris hispeed 6200 Bedienungsanleitung

Moneris

Moneris iWL220 Bedienungsanleitung

Ingenico

Ingenico iUC280 Bedienungsanleitung

Ingenico

Ingenico Tetra Move/5000 Bedienungsanleitung

Ingenico

Ingenico iWL250B Bedienungsanleitung

Optimum

Optimum M4230 Bedienungsanleitung

Triton

Triton RL5000 Bedienungsanleitung

Ingenico group

Ingenico group Lane/8000 Bedienungsanleitung

Gilbarco

Gilbarco FlexPay IV CRIND Installations- und Betriebshandbuch

Infinite Peripherals

Infinite Peripherals Infinea Tab Lite Bedienungsanleitung

PAX

PAX S920 Bedienungsanleitung

Ingenico

Ingenico iCT220, iCT250 Bedienungsanleitung

dejavoo

dejavoo Z Series Bedienungsanleitung

VeriFone

VeriFone VX 520 Series Bedienungsanleitung

Optomany

Optomany axept S900 Bedienungsanleitung

Skyzer

Skyzer iWL252 BLUETOOTH Bedienungsanleitung