PCE Instruments PA6000 Bedienungsanleitung

POWER

ANALYZER

Model : PCE-PA6000

Caution Symbol

Caution

* Risk of electric shock !

*Durin

the measurement,

do not open the cabinet.

Caution

* Do not apply the overload

olta

e, current to the input

terminal !

* Remove test leads before open

the battery cover !

* Cleanin

- Only use the dry

cloth to clean the plastic case !

Environment Conditions

* Installation cate

ories II .

* Pollution De

ree 2.

* Altitude up to 2000 meters.

* Indoor use.

* Relative humidity 80% max.

TABLE OF CONTENTS

1. FEATURES...................................................................... 1

2. SPECIFICATIONS............................................................ 1

2-1 General Specifications............................................. 1

2-2 Electrical Specifications...........................................

3. FRONT PANEL DESCRIPTION..........................................

4. PRECAUTIONS & PREPARATIONS FOR

MEASUREMENT..............................................................

5. MEASURING PROCEDURE ..............................................

5-1 AC Watt/V/A/PF, Hz Measurement ..........................

5-2 AC VA/V/A/PF, Hz Measurement .............................

5-3 AC Watt Hour ( Whr ) Measurement .......................

5-4 AC Volta

e, Current Measurement ..........................

5-5 DC Volta

e, Current Measurement ..........................14

5-6 Ohm Measurement.................................................

5-7 AC Watt, VA, Whr measurement, current input

cooperate with CT ( current transformer )...............15

5-8 AC Watt, VA, Whr measurement, current input

cooperate with Clamp-On Probe..............................

5-9 Data Hold...............................................................17

5-10 Peak Hold...............................................................17

5-11 Alarm Settin

..........................................................18

6. MAINTENANCE...............................................................18

6-1 Battery Replacement ..............................................19

6-2 Cleanin

...................................................................19

7. RS232 PC SERIAL INTERFACE........................................

8. THE ADDRESS OF AFTER SERVICE CENTER .................. 21

1. FEATURES

* Multi-functions : WATT, VA, Whr, PF ( Power factor ),

ACV, ACA, DCV, DCA, Hz, ohm.

* True AC power( Watt ) & apparent power ( VA )

measurement.

* True rms display for ACV, ACA.

* Supper lar

e LCD, easy to read-out, display the Watt,

Power factor, Volta

e & Current value at the same time.

* Accept different kinds current input si

nal as direct input,

inductive clamp probe or CT ( current transformer ).

*Autoran

* Built-in peak hold & data hold function.

* Watt & VA measurement with Hi, low alarm settin

capability.

* RS-232 output interface.

* Exclusive custom exclusive desi

n LSI circuit, provides

h accuracy, reliability and durability.

* Built-in over input indication.

* Power supply by batteries or AC to DC adapter.

* Built-in low battery indicator .

* Durable bench type housin

plastic case with carryin

handle.

2. SPECIFICATIONS

2-1 General Specifications

Display * 93 mm x 52 mm lar

e LCD ( Liquid

Crystal Display) display.

* Multi-display unit, show Volt, Ampere,

Watt, Power factor or Hz at same time.

Measurement WATT, VA, Whr,, Power factor, ACV, ACA,

DCV, DCA, Hz, ohm.

Zero Ad

ustment

Watt :

Watt : External ad

ustment by push button.

DCV, ACV, DCA, ACA :

Automatic ad

ustment.

Polarity Automatic switchin

, "-" indicates reverse

polarity.

Current input Direct input, inductive clamp probe or CT.

mode

Over input Indication of " - - - - or " - - - - .　　

Indication

Data Output RS232 serial interface.

Samplin

Time

W, VA, ACA, ACV, PF, Hz :

Approx. 1.5 Sec.

DCV, DCA, OHM :

Approx. 1 Sec.

Operatin

Temp. 0 to 50

蚓

( 32 to 122

蚌

Operatin

Less than 80 % R.H..

Humidity

Power Supply

Battery power :

DC 9V, 1.5 V AA (UM-3) battery x 6 PCs.

AC power :

AC to DC 9V adapter ( 500 mA ), optional.

Power

Battery power :

Consumption Approx. DC 30 mA

Dimension 280 x 210 x 90 mm ( 11.0 x 8.3 x 3.5 inch ).

Wei

ht Approx. 1.6 K

( 3.52 LB ).

Standard Test lead ( red & black ).............. 1 pair.

Accessories Instruction Manual...................... 1 PC.

2-2 Electrical Specifications ( 23 5

蚓

)

Watt (AC, true power),

current mode from direct inpu

Ran

e Resolution Accuracy

6,000 Watt 1 Watt ( 1.5% + 5 d )

* Accuracy are specified under the followin

conditions :

a) AC input current is 0.4 ACA & 10 ACA.

b) AC input volta

e is within 110 V 15 % and

220V 15%.

c) ACA, ACV input si

nal is sine wave, 50/60 Hz.

d) Power factor 0.8.

* ACA, ACV frequency response is from 40 to 400 Hz.

* Max. volt & current input si

nal value :

Volt input : Max. AC 600V, Current input : Max. AC 10

Watt (AC, true power),

current input cooperate with inductive probe or C

Ran

eResolution

9,999 Watt 1 Watt

99.99 KW 0.01 KW

999.9 KW 0.1 kW

* Accuracy will be same as the abve " Direct Current

Input Mode " but plus the accuray value of Current

Transformer ( CT ) or the acccuracy value of Inductive

Current Probe.

Input current should obey :

Inductive Probe - 20 ACA.

CT 100/5 A - 8 ACA.

CT 1000/5 A - 80 ACA.

VA ( AC, Apparent Power )

current mode from direct inpu

Ran

e Resolution Accuracy

99.99 V

0.01 V

( 2 % + 2d )

999.9 V

0.1 V

9,999 V

1 V

* Accuracy are specified under the followin

conditions :

a) AC input current is 0.4 ACA & 10 ACA.

b) AC input volta

e is within 110 V 15 % and

220V 15%.

c) ACA, ACV input si

nal is sine wave, 50/60 Hz.

* ACA, ACV frequency response is from 40 to 400 Hz.

POWER FACTO

current mode from direct input onl

Ran

e Resolution Accuracy

0.01 to 1.00 0.01 ( 1.5% + 2 d )

* Accuracy are specified under the followin

conditions :

a) AC input current is 0.4 ACA & 10 ACA.

b) AC input volta

e is within 110 V 15 % and

220V 15%.

c) ACA, ACV input si

nal is sine wave, 50/60 Hz.

* Max. volt & current input value :

Volt input : AC 600V, Current input : AC 10

AC VOLTAGE ( true rms ), DC VOLTAGE

Ran

e Resolution Accuracy

0.1 V to 299.9 V 0.1 V

DCV :

( 1 % + 1d )

300 V to 600 V 1 V

ACV ( 10 V ) :

( 1 % + 7d )

( 11 V to 100 V ) :

( 1 % + 5d )

( Others ) :

( 1 % + 1d )

* Auto ran

* Max. input volta

e : AC 600 V, DC 600 V.

* ACV accuracy is test under input si

nal is sine wave,

50/60 Hz.

* ACV frequency response is from 40 to 400 Hz.

* ACV is true rms.

AC CURRENT ( true rms ), DC CURRENT

current mode from direct inpu

Ran

e Resolution Accuracy

0.01 A to 10.00

10 m

ACA

1%+3d)

DCA

1%+1d)

* Max. input current : AC 10 A, DC 10 A.

* ACA accuracy is test under input si

nal is sine wave,

50/60 Hz.

* ACA frequency response is from 40 to 400 Hz.

* ACA is true rms.

AC CURRENT ( true rms ), DC CURRENT

current mode from inductive probe

Ran

e Resolution

1000

* Accuracy : Meter volta

e ran

e accuracy plus

Inductive Probe's accuracy.

* ACA is true rms. 5

AC CURRENT

current mode from CT ( current transformer

)

Ran

e Resolution

CT 100/5A, 0.1 - 200.0

0.1

CT 1000/5A, 1 - 2000

* Accuracy : Meter current ran

e accuracy plus

CT ( current transformer ) accuracy.

* ACA is true rms.

Watt Hou

current from direct inpu

Ran

eResolution

0.001 Whr to 9.999 Whr 0.001 Whr

10.00 Whr to 99.99 Whr 0.01 Whr

100.0 Whr to 999.9 Whr 0.1 Whr

1000 Whr to 9999 Whr 1 Whr

10 K Whr to 99.99 K Whr 10 Whr

100 K Whr to 999.9 K Whr 100 Whr

1000 K Whr to 9999 K Whr 1 K Whr

* Accuracy & other specification requirement same as

" Watt " ran

e exactl

OHMS

Ran

e Resolution Accuracy

9,999 ohm 1 ohm ( 1 % + 1d )

19.99 K ohm 10 ohm

* Auto ran

* Overload protection " Max. AC/DC 300 V.

Ran

e Resolution Accuracy

10.0 Hz to 99.9 Hz. 0.1 Hz ( 1 % + 1d )

100 Hz to 999 Hz. 1 Hz

* Auto ran

* Frequency si

nal input volta

e level should

> 6V & 600 V.

Remark :

he above specification are tested under th

environment RF Field Stren

th less than 3 V/M

frequency less than the 30 MHz only.

Inhaltsverzeichnis

Andere PCE Instruments Messgerät Handbücher

PCE Instruments

PCE Instruments PCE-RCM 10 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-ALK Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-RVI 4 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-VE 1030N Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-TG 300-P5EE Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-USC 20 Bedienungsanleitung

PCE Instruments

PCE Instruments Dillon Quick-Check Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-MSM 4 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-USC 30 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-320 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-910 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-CSM 1 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-HWA 20BT Bedienungsanleitung

PCE Instruments

PCE Instruments PCE- WP21 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-VT 3700 Bedienungsanleitung

PCE Instruments

PCE Instruments PHM 14 Bedienungsanleitung

PCE Instruments

PCE Instruments ADL 11 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-GPA 62 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-DFG N Series Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-423 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-EM 29 Bedienungsanleitung

PCE Instruments

PCE Instruments PSE-SDL 1 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-PMI 3 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-FM 50N Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung