Peerless-AV LCH-100 Leitfaden

2300 White Oak Circle • Aurora, Il 60502 • (800) 865-2112 • Fax: (800) 359-6500 • www.peerless-av.com

ISSUED: 09-30-02 SHEET #: 090-9085-6 07-23-13

Installation and Assembly - Monitor Desktop Stand Models: LCH-100

LCH-100

IMPORTANT! Read entire instruction sheet before you start installation and assembly.

NOTE: You may not use all hardware provided.

NOTE: Some parts may not appear exactly as illustrated.

LOCK BALL

IMPORTANT! The product is made to support screens with a Vesa compliant hole pattern.

For safe mounting, mounting screws must turn at least three times in the screen inserts.

SPRING LOADED PRODUCT

• Only release lock ball when screen is

installed. Do not place chin or object

above pole when releasing lock ball.

WARNING

LCH-100

Description Qty. Part #

telescopic pedestal 1 091-1088

Bpivot head 1 091-1090

Cmounting base 1 091-1089

Dadapter plate 1 095-1100

EM4 x 8mm countersink screw 4520-1795

FM4 x 10mm phillips screw 4520-1796

Gwood screw #14 x 1 4510-9159

Hhex bolt 1 -

Ihex nut 1 -

JM4 x 0.7mm nut 4 530-1082

Kpressure plate 1 -

Lnylon washer 1 540-1636

M4mm allen wrench 2 560-0072

N3mm allen wrench 1 560-0073

Parts List

MAX Load Capacity:

25 lb (11.4KG)

ISSUED: 09-30-02 SHEET #: 090-9085-6 07-23-13

2 of 5

DESKTOP

Insert telescopic pedestal (A) into mounting base (C).

Tighten set screws where shown with 3 mm allen wrench (N).

Mark hole on desktop for positioning mount.

Drill one 1/2" dia. hole through desktop. Attach

mounting base (C) to desktop using hex bolt (H),

pressure plate (K), and hex nut (I). Tighten nut

using proper sized wrench.

Important! Mount is to be installed onto desktops

3/4" to 1-5/8" thick only! For thicker mounting

surfaces, you may have to provide your own

hardware.

There are two methods of installation. Follow step 1 for installation using hex bolt and pressure plate or

step 2 using four wood screws. Use four holes on mounting base (C) to mark holes

on desktop for positioning mount. Drill four 3/16"

dia. holes through desktop. Attach mounting base

SET SCREWS

• Mount must be installed on wood and/or wood composition surfaces of at least 3/4" thick. However, the installer

must ensure that the mounting surface will safely hold the combined weight of the mount and the screen. See other

mounting requirements below.

CAUTION

ISSUED: 09-30-02 SHEET #: 090-9085-6 07-23-13

3 of 5

GENERIC LCD SCREEN

To install to a VESA 75 mm standard LCD monitor,

attach pivot head (B) to back of LCD monitor using four

M4 x 10 mm phillips screws (F) as shown.

Skip to step 6.

GENERIC LCD SCREEN

To install to a VESA 100 mm standard LCD monitor, attach

adapter plate (D) to pivot head (B) using four M4 x 8 mm

phillips screws (E) and four M4 x 0.7mm nuts (J) as shown in

detail 1. Attach pivot head (B) to back of LCD monitor using

four M4 x 10 mm phillips screws (F) as shown in detail 2.

DETAIL 1 DETAIL 2

ISSUED: 09-30-02 SHEET #: 090-9085-6 07-23-13

4 of 5

Place nylon washer (L) and pivot head (B) on top pin

of telescopic pedestal (A) as shown. To restrict rotation

of LCD screen to 90°, lineup rear set screw with slot

and tighten where shown in detail 3 using 3 mm allen

wrench (N). To completely restrict rotation, tighten rear

set screw using 3 mm allen wrench (N).

SET SCREWS

SLOT

REAR SET

SCREW

DETAIL 3

Turn tube nut counterclockwise to loosen. Gently hold pivot head

(B) down with one hand, and gently press on lock ball with the other

hand. Lock ball must be inserted into outer tube to obtain up and down

movement. Do not insert lock ball all the way into the inner tube.

Adjust to desired height making sure to locate lock ball into one the

four holes as shown.

NOTE: Setting the lock ball in the lowermost hole requires the removal

of the inner white plastic ring. To do this set the lock back in a

different hole. Slowly unscrew the tube nut until it comes off threads.

Remove the white plastic ring inside the tube nut. Retighten the tube

nut. Adjust the height until the lock ball reaches the lowermost hole.

TUBE NUT LOCK BALL

BACK VIEW

INNER TUBE

OUTER TUBE

ISSUED: 09-30-02 SHEET #: 090-9085-6 07-23-13

5 of 5

Route cord(s) through cable clips for cord management.

Note: Ensure the cords have enough slack for proper clearance

and function.

Turn screen clockwise by hand for landscape or portrait

orientation.

CABLE

CLIPS MONITOR

CORD(S)

For tilt adjustment use one 4 mm allen wrench (M) to

hold socket screw in place and the other 4 mm allen

wrench (M) to turn the socket screw clockwise to tighten

and counterclockwise to loosen as shown.

MSOCKET

SCREW

All other brand and product names are trademarks or registered trademarks of their respective owners.

Inhaltsverzeichnis

Andere peerless-AV Rack & Stand Handbücher

peerless-AV

peerless-AV SR598W Bedienungsanleitung

peerless-AV

peerless-AV LCT620A Bedienungsanleitung

peerless-AV

peerless-AV ACC116 Bedienungsanleitung

peerless-AV

peerless-AV HLG440-LG(-Q10) Bedienungsanleitung

peerless-AV

peerless-AV PRGS-ALU0811 Bedienungsanleitung

peerless-AV

peerless-AV SR598ML3T Bedienungsanleitung

peerless-AV

peerless-AV DCS400 Bedienungsanleitung

peerless-AV

peerless-AV DS-LEDIER-5X5 Bedienungsanleitung

peerless-AV

peerless-AV KIL740-EUK Bedienungsanleitung

peerless-AV

peerless-AV PR598-M Bedienungsanleitung

peerless-AV

peerless-AV PTM200 Leitfaden

peerless-AV

peerless-AV SF670 Bedienungsanleitung

peerless-AV

peerless-AV DS-OM46ND-CEIL Bedienungsanleitung

peerless-AV

peerless-AV PA775 Bedienungsanleitung

peerless-AV

peerless-AV PSTK-600 Bedienungsanleitung

peerless-AV

peerless-AV DS-S555-3X3 Bedienungsanleitung

peerless-AV

peerless-AV Paramount PP740 Leitfaden

peerless-AV

peerless-AV NEC PD04VW MFS 46 55 Bedienungsanleitung

peerless-AV

peerless-AV SMARTMOUNT LT SAL724 Bedienungsanleitung

peerless-AV

peerless-AV SUA740P Bedienungsanleitung

peerless-AV

peerless-AV DSF210-GHC Bedienungsanleitung

peerless-AV

peerless-AV DS-LEDLSAA Series Bedienungsanleitung

peerless-AV

peerless-AV ACC-SPARK70 Bedienungsanleitung

peerless-AV

peerless-AV EPA762PU Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung

peerless-AV LCH-100 Leitfaden

Beliebte Rack & Stand Handbücher anderer Marken