Perfect Prime 532 Bedienungsanleitung
UV LIGHT METER
532
Instruction Manual
CONTENTS
P. 1
................................................................ 2
......................................................................... 3
....................................................... 4
......................................................................... 4
....................................................................... 5
...................................................................... 6
.............................................. 7 - 10
........................ 11
1. Safety Information
2. Introduction
3. Precautions On Handling
4. Maintenance
5. Specifications
6. Symbol Definition And Button Location
6.1 LCD Display
6.2 Name Of Parts & Position
7. Characteristics Of Sensor Spectrum Response
1. SAFETY INFORMATION
P. 2
Read the following safety information carefully before attempting to
operate or service the meter.
Use the meter only as specied in this manual ; otherwise, the protection
provided by the meter may be impaired.
ENVIRONMENT CONDITIONS:
•Altitude up to 2000 meters
•Relatively humidity 70% max.
•Operation Ambient 0 ~ 40°C
EXPLANATION OF SYMBOLS:
Comply with EMC.
When servicing, use only specied replacement parts.
Thank you for using our UV Light Meter. To ensure that you can get the
most from it, we recommend that you read and follow the manual
carefully before use. The UV Meter has been designed, manufactured, and
delivered under strict quality control criteria. This meter has the following
characteristic.
• Easy to use
• Auto power o function
• Measuring range fully
covering UVA & UVB
• MAX/MIN function
build in
• Large backlight LCD
display
2. INTRODUCTION
P. 3
Operating carefully, and do not drop the meter or hit it with a hard object.
Avoid using the meter in a dirty, dusty, or salt-air area or where there are
corrosive gases. If dirt or dust adhered to the surface of the light detecting
surface, this will decrease the accuracy of the measuring value. To clean
the surface, use soft and dry cloth to wipe it clean.
3. PRECAUTIONS ON HANDLING
4. MAINTENANCE
3. PRECAUTIONS ON HANDLINGE
4. MAINTENANCE
ATTENTION!
Repairs or servicing not covered in this manual should only be
performed by qualied personal.
CLEANING
Periodically wipe the case with a dry cloth. Do not use abrasives or
solvents on this instrument.
Note:
If it is not used for a long time, please store the meter in
chamber under 60%RH.
P. 4
5. SPECIFICATIONS
P. 5
Measuring range:
Sensitivity Wavelength
Region (nm):
Wavelength for
Calibration (nm):
Accuracy:
Temperature characteristics:
Response time:
Light detector:
Over range:
Power supply:
Power life:
Operation temperature:
Operation humidity:
Storage Temperature:
Storage Humidity:
Dimension / Weight:
Weight:
Accessories:
Low range: 1 to 3999 uw/cm2
High range: 0.01 to 39.99 mw/cm2
260 nm ~ 395 nm
365 nm
±3% rdg ±5 dgts
±0.1% / °C(away from 25°C)
0.5 sec
UV Photodiode
“-OL-” display
1.5V type AA battery x2
Approx. 80 hours
0°C ~ 40°C(32°F ~ 104°F)
0~80% RH
-10 to 50°C (14 to 122°F)
0 to 60% RH
169(L)×63(W)×37(H)mm (6.7”×2.5”×1.5”)
Approx. 210g
Battery, instruction manual, carrying case.
6. SYMBOL DEFINITION AND
BUTTON LOCATION
P. 6
6.1 LCD Display:
Minimum value
indicator
Maximum value
indicator
Value hold
indicator
Ultraviolet
intensity Unit
indicator
Autopower
o indicator
Battery capacity
indicator
Ultraviolet
intensity
value indicator
6. SYMBOL DEFINITION AND
BUTTON LOCATION
P. 7
6.2 Name of Parts & Position
1Light Sensing Probe:
•This probe can be xed on the meter parallel or perpendicular to the
LCD surface.
6. SYMBOL DEFINITION AND
BUTTON LOCATION
P. 8
•Or it may be detached from the
unit to t the measuring
requirement.
/ /
6 1/2" large size back light LCD display.
LCD display:2
6. SYMBOL DEFINITION AND
BUTTON LOCATION
P. 9
Push this button to turn on the meter. Push and hold this button for 3
seconds to turn it o. The unit will automatically turn itself o after 30
minutes if there is no key operation. To disable the automatic power o
function, turn the meter o, push and keep holding“ ” button, then
push power button to turn on. The“ ” will disappear from the LCD to
conrm this operation.
Power button:3
Push this button to turn on and o the LCD backlight. The backlight will
be automatically o after 30 seconds to save battery power.
Backlight ( Power ) button:4
The user may hold the present reading and keep it on the LCD display
by pressing the button. To release the data held operation, user
may press the button again.
HOLD button:5
Push this button to set the meter working under MAX/MIN mode. By
pushing this button, the user may swap the LCD reading among
maximum, minimum and current reading. Push and hold this key for 3
seconds to exit MAX/MIN mode.
Max Min button:6
Inhaltsverzeichnis
Andere Perfect Prime Messgerät Handbücher
Perfect Prime
Perfect Prime LM530 Bedienungsanleitung
Perfect Prime
Perfect Prime 531 Bedienungsanleitung
Perfect Prime
Perfect Prime LM532 Bedienungsanleitung
Perfect Prime
Perfect Prime WD9829 Bedienungsanleitung
Perfect Prime
Perfect Prime 530 Bedienungsanleitung
Perfect Prime
Perfect Prime TC0304 Bedienungsanleitung
Perfect Prime
Perfect Prime AQ380 Bedienungsanleitung
Perfect Prime
Perfect Prime AR1890 Bedienungsanleitung
Perfect Prime
Perfect Prime AR1890 Bedienungsanleitung
Perfect Prime
Perfect Prime AR1890 Bedienungsanleitung
Perfect Prime
Perfect Prime AR168 Bedienungsanleitung
Perfect Prime
Perfect Prime AR1890 v3 Bedienungsanleitung
Perfect Prime
Perfect Prime CO2008 Bedienungsanleitung
Perfect Prime
Perfect Prime LM531 Bedienungsanleitung
Perfect Prime
Perfect Prime CO2512 Bedienungsanleitung
Perfect Prime
Perfect Prime AR1890 Bedienungsanleitung
Perfect Prime
Perfect Prime AQ9600 Bedienungsanleitung
