PerkinElmer LAMBDA 265 Programmierhandbuch
09931295C
PerkinElmer, 710 Bridgeport Avenue,
Shelton, CT 06484-4794, U.S.A
Produced in the USA.
Lambda 265, 365 and 465 Manual Magnetic Stirrer
Assembly Installation Instructions
This instruction sheet describes the installation of this accessory which is used with the Lambda 265, 365
and 465 Spectrophotometer.
NOTE:
Read these instructions before you install this accessory.
Contacting PerkinElmer
Supplies, replacement parts, and accessories can be ordered directly from PerkinElmer, using the part
numbers.
See our website:
http://perkinelmer.com
PerkinElmer's catalog service offers a full selection of high-quality supplies.
To place an order for supplies and many replacement parts, request a free catalog, or ask for information:
If you are located within the U.S., call toll free 1-800-762-4000, 8 a.m. to 8 p.m. EST. Your order will be
shipped promptly, usually within 24 hours.
If you are located outside of the U.S., call your local PerkinElmer sales or service office.
Features
•Easy to install
•Single-hand operation by just turning the adjustment wheel
•Stirring bar rotating evenly at variable speed
•Vertical mixing
•Ideal for small to medium stirring volumes of low-viscosity liquids
•Only one channel stirring available
Figure 1 Magnetic Stirrer Control Unit [P/N: N4101015]
09931295C
2
Dimensions and Specifications
Description
Configuration of the Magnetic Stirrer Assembly
Figure 2 Configuration
Physical Characteristic Specification
Dimensions (mm) 65 (W) x 50 (D) x 45(H)
Weight (g) 79
Speed (rpm) 120 ~ 1,200
Stirring Power (W) 10
Operating Condition 0~40℃, 80% Humidity
Power AC 100-240 V / 50-60 Hz / 0.4 A
09931295C
3
Compatible Lambda 265 Cell Holders to Magnetic Stirrer Assembly
Accessory Drawing
Single Cell Holder
Water Jacketed
Single Cell Holder
Compatible Lambda 365 Cell Holders to Magnetic Stirrer Assembly
Accessory Drawing
Single Cell Holder
Water Jacketed
Single Cell Holder
Micro Cell Holder
09931295C
4
Compatible Lambda 465 Cell Holders to Magnetic Stirrer Assembly
Accessory Drawing
Single Cell Holder
(Upon request)
Water Jacketed
Single Cell Holder
(Upon request)
8 Cell Water Jacketed Cell
Changer
Water Jacketed Automatic
Referencing Stage
Where, the cell holder will be modified to be connected with the magnetic stirrer only upon
request.
09931295C
5
Lambda 265 Installation
CAUTION
ATTENTION
Make sure the instrument is turned off while installing this accessory.
Assurez-vous que l’instrument est éteint lors de l’installation de cet
accessoire.
1. Connect the plug of the power cable to the power input socket of the control unit.
Figure 3 Connecting the power cable
2. Connect the stirrer control cable to the 4-pin socket of the control unit.
Figure 4 Connecting the stirrer control cable
3. Using the M3 wrench, remove the screw in the single cell holder and disassemble the holder.
Figure 5 Removing the screw
09931295C
6
4. Insert the stirrer head of the stirrer control cable into the single cell holder.
Figure 6 Inserting the stirrer head
5. Assemble the single cell holder with the stirrer head inserted, and tighten the screw using the M3
wrench.
Figure 7 Assembling the single cell holder
09931295C
7
Lambda 365 Installation
CAUTION
ATTENTION
Make sure the instrument is turned off while installing this accessory.
Assurez-vous que l’instrument est éteint lors de l’installation de cet
accessoire.
Connect to Single Cell Holder
1. Connect the plug of the power cable to the power input socket of the control unit.
Figure 8 Connecting the plug
2. Connect the stirrer control cable to the 4-pin socket of the control unit.
Figure 9 Connecting the stirrer control cable
09931295C
8
3. Using the M3 wrench, remove the screw in the single cell holder and disassemble the holder.
Figure 10 Removing the screw
4. Insert the stirrer head of the stirrer control cable into the single cell holder.
Figure 11 Inserting the stirrer head
5. Assemble the single cell holder with the stirrer head inserted, and tighten the screw using the M3
wrench.
Figure 12 Assembling the single cell holder
09931295C
9
Connect to the Water Jacketed Single Cell Holder
1. Connect the plug of the power cable to the power input socket of the control unit.
Figure 13 Connecting the plug
2. Connect the stirrer control cable to the 4-pin socket of the control unit.
Figure 14 Connecting the stirrer control cable
3. Using the M3 wrench, remove the screw in the water jacketed single cell holder and disassemble
the holder.
Figure 15 Removing the screw
09931295C
10
4. Insert the stirrer head of the stirrer control cable into the water jacketed single cell holder.
Figure 16 Inserting the stirrer head
5. Assemble the water jacketed single cell holder with the stirrer head inserted, and tighten the
screw using the M3 wrench.
6. Using the screw driver remove the M2.5 Phillips round head screw with washer (M3*10L) and
detach the Stirrer cable fixing block from the front cover as marked with the red box in the
picture below. Take out the connecting port of the stirrer cable through the hole of the fixing
block.
Figure 17 Detaching the Stirrer cable fixing block
7. After arranging the stirrer cable neatly, assemble the stirrer cable fixing block in the front cover
using screw driver. Be careful that the stirrer cable does not block the light beam path to the cell
holder.
Figure 18 Assembling the Stirrer cable fixing block
Andere Handbücher für LAMBDA 265
3
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere PerkinElmer Messgerät Handbücher
PerkinElmer
PerkinElmer Spotlight 400 Series Bedienungsanleitung
PerkinElmer
PerkinElmer AAnalyst 300 Bedienungsanleitung
PerkinElmer
PerkinElmer Lambda 365 Bedienungsanleitung
PerkinElmer
PerkinElmer Lambda 11 Bedienungsanleitung
PerkinElmer
PerkinElmer Lambda 465 Bedienungsanleitung
PerkinElmer
PerkinElmer FL 8500 Bedienungsanleitung
PerkinElmer
PerkinElmer LabChip GX Bedienungsanleitung
PerkinElmer
PerkinElmer FL 6500 Bedienungsanleitung
PerkinElmer
PerkinElmer DSC 4000 Montageanleitung
PerkinElmer
PerkinElmer LAMBDA 265 Bedienungsanleitung
PerkinElmer
PerkinElmer Lambda 365 Bedienungsanleitung
PerkinElmer
PerkinElmer AAnalyst 300 Bedienungsanleitung
PerkinElmer
PerkinElmer Lambda 465 Bedienungsanleitung
PerkinElmer
PerkinElmer LabChip GX Touch Bedienungsanleitung
PerkinElmer
PerkinElmer TGA 4000 Montageanleitung
PerkinElmer
PerkinElmer Spectrum 100 Series Bedienungsanleitung
PerkinElmer
PerkinElmer Polarizer Holder Bedienungsanleitung
PerkinElmer
PerkinElmer Lambda 365 Fiber Coupling Module Bedienungsanleitung
PerkinElmer
PerkinElmer FL 6500 Bedienungsanleitung
PerkinElmer
PerkinElmer Frontier IR Bedienungsanleitung
