Phanteks Eclipse P200A Bedienungsanleitung

INSTALL:

INSTALL THE ITX MOTHERBOARD WITH 4x MOTHERBOARD SCREWS

Plug in all cables you need for

your build into the power

supply ﬁrst before installing it

for easier installation

The right-side panel can be

secured with a screw if cables

are pushing against it.

CLEARANCE REAR

SIDEFRONT

INSTRUCTION MANUAL

Thank you for choosing Phanteks. Please take a moment to

carefully go through the manual. Phanteks will not take

responsibility for any damages incurred due to incorrect

installation or usage of this product.

This manual supports the following models:

PH-EC200AC_BK (2x 120 mm Black Fans)

PH-EC200ATG_DBK (2x 120 mm D-RGB Fans)

INTRODUCTION

PRODUCT OVERVIEW

ECLIPSE P200A INSTRUCTION MANUAL V1.0V1.0

English

1. Power Button

2. Reset Button

(P200AC Only)

3. D-RGB Mode

(P200ATG-D Only)

4. D-RGB Color

(P200ATG-D only)

5. Headphone / Microphone

6. USB-C Gen 2

(P200ATG-D only)

7. USB 3.0

Francais

1. Bouton d’alimentation

2. Bouton de réinitialisation

(P200AC Only)

3. D-RGB Mode

(P200ATG-D Only)

4. D-RGB Color

(P200ATG-D Only)

5. Casque / Microphone

6. USB-C Gen 2

(P200ATG-D only)

7. USB 3.0

Deutch

1. Ein-/Aus Schalter

2. Reset-Knopf

(P200AC Only)

3. D-RGB Mode

(P200ATG-D Only)

4. D-RGB Color

(P200ATG-D Only)

5. Kopfhörer / Mikrofon

6. USB-C Gen 2

(P200ATG-D only)

7. USB 3.0

Espanol

1. Botón de encendido

2. Botón de reinicio

(P200AC Only)

3. D-RGB Mode

(P200ATG-D Only)

4. D-RGB Color

(P200ATG-D Only)

5. Auricular / Micrófono

6. USB-C Gen 2

(P200ATG-D only)

7. USB 3.0

ECLIPSE P200A Performance (PH-EC200AC_BK)

ECLIPSE P200A DIGITAL-RGB (PH-EC200ATG_DBK)

FRONT I/O FEATURES

STEP 2. MOTHERBOARD INSTALLATION

THE POWER SUPPLY IS INSTALLED THROUGH THE REAR OF THE CHASSIS. LOOSEN THUMBSCREWS TO REMOVE PSU BRACKET.

INSTALL PSU TO BRACKET WITH 4x PSU SCREWS.

STEP 3. POWER SUPPLY INSTALLATION

INSTALL THE SSD(s) WITH 4x SSD SCREWS ON THE DEDICATED

SSD BRACKET AND MOUNT IT BACK INTO THE CHASSIS.

STEP 4. STORAGE INSTALLATION - Dedicated 2.5” SSD Bracket

STEP 1. REMOVING CHASSIS PANELS

a. PULL THE SIDE PANEL, THEN LIFT THE PANEL UP

TO REMOVE IT

b. REMOVE FRONT PANEL

BY PULLING ON THE

PANEL FROM BELOW

c. REMOVE THE BOTTOM

DUST FILTER FROM

THE FRONT

120

FAN

120

RAD

5 7643

120

FAN

120

RAD

120

FAN

140

FAN

BOTTOM

120

FAN

120

RAD

140

RAD

CPU Cooler Height 165 mm

GPU Clearance 355 mm

GPU Thickness 3-slot, 65mm

5 76*2

LOOSEN:

P200A PRE-INSTALLED ACCESSORIES: P200A INCLUDED ACCESSORIES:

2x 120 mm Black or

2x 120 mm D-RGB

4x PSU Screw 3x Case Screw 1x Thumb Screw6x Zip Ties2x SSD Cover 1x Vertical GPU Mount21x Motherboard

+ SSD Screw

COLO RS

2 SEC

MODE S

SOLID

BREAT HING

RADA R

SPARKL E

RAINBOW

PRESS AND HOLD TH E MOD E BUT TO N TO TURN O FF LEDS

PRESS AGAIN TO TURN ON

DIGITAL-RGB CONTROLS (P200ATG_D MODEL)

*Optional upgrade

All manuals and user guides at all-guidesbox.com

all-guidesbox.com

For a more accurate overview,

please consult the motherboards’

manual.

POWER LED POWER SWITCH

NOT USED

HDD LED RESET SWITCH

Power LED*

a. CONNECT THE HD-AUDIO &

USB 3.0 CABLES

b. CONNECT THE FRONT I/O CABLES TO THE FRONT I/O HEADER ON THE

MOTHERBOARD SEE FRONT I/O HEADER DIAGRAM FOR GENERAL REFERENCE

ALL MODELS: MOTHERBOARD FRONT I/O HEADER DIAGRAM

P200AC MODEL ONLY:

P200ATG_D MODEL ONLY:

SATA

a. CONNECT THE SATA CABLE TO THE

POWER SUPPLY

CONNECT MORE DRGB PRODUCTS

b. CONNECT DRGB CONNECTOR TO DRGB PRODUCTS

c. CONNECT MOTHERBOARD DRGB ADAPTER TO THE

MOTHERBOARD

SYNC YOUR CASE LIGHTING TO THE MOTHERBOARD OPTIONAL

To DIGITAL-RGB Products

MOTHERBOARD

D-RGB HEADER

To D-RGB Motherboard (optional)

Compatible with:

INSTALL:

ECLIPSE P200A INSTRUCTION MANUAL V1.0

OPTIONAL UPGRADES

INSTALL:

a. INSTALL THE HDD DRIVE INTO THE STACKABLE 3.5”

HDD BRACKET.

b. STACK TWO BRACKETS WHEN INSTALLING MORE HDDs.

IF NOT, SKIP THIS STEP.

TOREMOVE ABRACKET,

PRESS AND PULL TO RELEASE.

d. MOUNT THE BRACKETS INTO THE CHASSIS AND SECURE

EACH HDD WITH 2 THUMBSCREWS

STEP 8. STORAGE INSTALLATION - 3.5” HDD

STEP 5.

a. Release the GPU brackets by

removing 3 screws.

b. Secure the GPU brackets as shown with

the same 3 screws.

c. Secure the GPU Mount to the bottom of the chassis with the 2 thumb screws. Secure the Riser Cable to the GPU Mount.

STEP 7. VERTICAL GPU MOUNT - OPTIONAL

MOTHERBOARD CONNECTIONS

STEP 6. DRGB LIGHTING  P200ATG_D MODEL ONLY

(RISER CABLE SOLD SEPERATELY. PH-CBRS_FL15)

(STACKABLE HDD BRACKET SOLD SEPERATELY. PH-HDDKT_03)

HD D

The GPU Mount has two

mounting positions. Position A

allows for better air cooling and

3-slot GPU cards.

INSTALL:

USB-C

RAINBOW

ADDRESSABLE ADDRESSABLE

INSTALL:

INSTALL THE SSD DRIVE WITH 4x SSD SCREWS ON THE SSD COVER

AND MOUNT BACK INTO THE CHASSIS.

Up to 4 Stackable HDD Brackets can be installed in the side

fan locations. These are available separately.

STEP 5. STORAGE INSTALLATION - 2.5” SSD Covers

RELEASE:

Lighting must be controlled through the motherboard software when connected to the motherboard.

The Color and Mode buttons do not work when synced to motherboard.

The rear fan position

cannot be used with a

vertical GPU.

*On the P200ATG_D model, the D-RGB lighting functions as a power LED.

All manuals and user guides at all-guidesbox.com

Dieses Handbuch passt für folgende Modelle

Andere Phanteks Gehäuse Handbücher

Phanteks

Phanteks Enthoo Series Bedienungsanleitung

Phanteks

Phanteks ENTHOO PRO II Bedienungsanleitung

Phanteks

Phanteks Enthoo Pro M Bedienungsanleitung

Phanteks

Phanteks ECLIPSE P350X Bedienungsanleitung

Phanteks

Phanteks Evolv Shift X Bedienungsanleitung

Phanteks

Phanteks ECLIPSE P200A Bedienungsanleitung

Phanteks

Phanteks eclipse p400 Bedienungsanleitung

Phanteks

Phanteks Enthoo Primo Bedienungsanleitung

Phanteks

Phanteks Enthoo Series Bedienungsanleitung

Phanteks

Phanteks ECLIPSE PH-EC500ATG_BK Bedienungsanleitung

Phanteks

Phanteks Enthoo Series Bedienungsanleitung

Phanteks

Phanteks Enthoo Evolv ATX Bedienungsanleitung

Phanteks

Phanteks ECLIPSE P200A Bedienungsanleitung

Phanteks

Phanteks Enthoo Series Bedienungsanleitung

Phanteks

Phanteks Enthoo Series Bedienungsanleitung

Phanteks

Phanteks Enthoo Series Bedienungsanleitung

Phanteks

Phanteks eclipse p400 Bedienungsanleitung

Phanteks

Phanteks Eclipse Series Bedienungsanleitung

Phanteks

Phanteks eclipse p400 Bedienungsanleitung

Phanteks

Phanteks PH-ES314ETG Bedienungsanleitung

Phanteks

Phanteks ENTHOO ELITE Bedienungsanleitung

Phanteks

Phanteks ECLIPSE P300 Bedienungsanleitung

Phanteks

Phanteks Eclipse P600s Bedienungsanleitung

Phanteks

Phanteks Enthoo Pro M Bedienungsanleitung

Beliebte Gehäuse Handbücher anderer Marken

SilentiumPC

SilentiumPC Armis AR5 Handbuch

Pulsar

Pulsar 17/TRP80/DSPR Bedienungsanleitung

Thermaltake

Thermaltake V150 TG Bedienungsanleitung

MSI

MSI MPG SEKIRA 500X Bedienungsanleitung

Antec

Antec Dark fleet DF-10 Bedienungsanleitung

Nexans

Nexans WTC05 Bedienungsanleitung

Peavey

Peavey DS 1502 Bedienungsanleitung

D-Link

D-Link ShareCenter Pro DNS-1550-04 Bedienungsanleitung

Rosewill

Rosewill RX82-U(JBOD) Bedienungsanleitung

QNAP

QNAP SAS JBOD CLI 1.0 Bedienungsanleitung

GAMDIAS

GAMDIAS Talos P1 Bedienungsanleitung

Auvs

Auvs KR615 Bedienungsanleitung

Digitus

Digitus DA-71114 Bedienungsanleitung

CommScope

CommScope FDH 3000 Bedienungsanleitung

FS FHD-FWME4 Bedienungsanleitung

JBL

JBL CS1215T Bedienungsanleitung

Pulsar

Pulsar ARAD-S4 Bedienungsanleitung

Pulsar

Pulsar AWO454 Bedienungsanleitung