
Copyright © 2019, Fast ČR, a. s. Revision 02/2019
EN - 9
6. BEFORE FIRST USE
WARNING – DO NOT let young children play with the appliance, or any part of it, or the packaging! Always unplug the appliance and leave the appliance
cool down, before cleaning it, and when it is not in use. Do not place or immerse the heating base or power cord in water or other liquids or spill any liquids on the
heating base or power cord. Do not use any abrasive or corrosive cleaners for cleaning to avoid damage to the surfaces. Do not place the heating base or power
cord in an automatic dishwasher.
1. Unpack the appliance and all parts and accessories carefully. Check that no parts are damaged or missing (see: ‘Knowing Your New Food Dehydrator’).
Carefully remove all packaging, shipping materials, stickers, and promotional materials. However, DO NOT remove the model label.
2. Before rst use and after a longer period of storage, clean all parts of the appliance (see:‘Care and Cleaning’).
IMPORTANT - the trays have two dierent positions. One is intended for storing – in this one the individual trays can be tted together. The other one –
which can be achieved by rotating the tray by 180° – forms space between the trays that is used to dry food.
7. OPERATION
WARNING – Always ensure that the appliance and all its parts and accessories are out of reach of young children. The appliance is intended for dehydrating
edible food via an electrically powered heating system. Do not attempt to heat the appliance or its parts by any other source of heat. Do not pour or spill any liquids
into the heating base of the appliance to avoid injuries and damage due to overheating, re, and electric shock. Improper use or misuse may cause severe injuries
and damage. Always unplug the appliance, when the appliance is not in use.
If water runs on or under the heating base during operation, immediately unplug the appliance (see:‘Solving Problems’). However, some droplets of juices on the
top of the heating base are quite normal and no need for concern. Do not use violence. Do not place the appliance near the edge of the working space or on inclined
surfaces. Ensure to place the appliance on a level, at, stable, and dry surface.
During operation: Do not move the appliance during operation. The ventilation slits at the bottom of the heating base and the steam vent in the cover may not be
blocked. Do not block the openings in the white fan assembly at the centre of the heating base to avoid overheating and damage to the appliance. Do not place any
food onto the top plate of the heating base.
IMPORTANT - The maximum thickness of any pieces of food to be dehydrated may not exceed approx. 2cm (4/5 inch). Otherwise the dehydration chamber cannot
be closed correctly and the air circulation is hindered.
1. Prepare your food (see:‘Tips for Best Results’and ‘Preparations’). Dab dry very wet food.
2. Remove the cover and food trays. Then, place the heating base of the appliance on a suitable table or counter near an appropriate wall power outlet.
3. Spread your food on the food trays, leaving some space between the individual pieces to allow unhindered air-circulation. In the chapter‘Tips for Best Results’
you will nd a lot of useful hints for getting the optimum colour, avour, and consistency.
4. Place the loaded food trays onto the heating base (see:‘Tips for Best Results’).
With some food trays empty, you should place the empty food trays on the heating base rst. Close the dehydration chamber (built by the food trays) via the
cover.
IMPORTANT - Always close the appliance by the designated cover before switching on the appliance. The appliance will not work properly without the cover, and
consistency and avours of your food will be aected disadvantageously.
NOTE
The type, amount, consistency, and thickness of the food pieces will determine the required dehydrating time and result.
5. Insertthepowerplugintothewallpoweroutlet.TheLCDdisplayilluminatesandshowsthedefaultvaluesoftemperatureanddehydratingtime:40°Cand10:00
hours.
CAUTION – Do not pour any water into the appliance. However, during operation, some drops of juices may accumulate on the base. This may happen with very
juicy types of food and is no reason for concern.
6. Press the SET button to select the temperature adjusting mode. The temperature value ashes on the LCD display. Turn the adjusting knob to select the desired
temperaturebetween35°Cand70°Cinstepsof1°C.PresstheSETbuttonagaintoswitchtothetimeradjustingmode.Turntheadjustingdialforselectingthe
desired dehydrating time within the possible range of 30 minutes to 7 hours in steps of 30 minutes. Press the Start/Stop button
to start the dehydration
cycle.
7. The fan starts operation audibly. On the LCD display, the heating icon ashes during the complete dehydration cycle. As soon as the actual temperature within
the dehydration chamber reaches the set temperature, the timer starts counting down the set dehydrating time.
8. Simply wait until the dehydration cycle has nished with the time display reaching“0”, an acoustic signal sounds with the time-out icon
ashing on the LCD
display for some seconds. Thereafter, the appliance stops operation automatically and the LCD display is deactivated.
CAUTION – Before leaving the appliance operate without supervision, always ensure correct operation (see:‘Important Safeguards’). Wipe o liquids that
dripped onto the heating base. Check, whether the count-down of the dehydrating time started to ensure that the appliance will shut-o automatically
in time.
NOTE
You can Interrupt or cancel any dehydration cycle at any time you like (see:‘Pause Function’). Also, use this pause function, if you wish to change the set temperature,
check the consistency of your food, or change the sequence of food trays on the heating base, while a dehydration cycle is running.