Philips AVENT scf356 Bedienungsanleitung

User manual

SCF356

Always here to help you

www.philips.com/welcome

Specications are subject to change without notice

4213.354.3672.5

2345

6789

10 11 12 13

14 15 16 17

18 19 20 21

22 23 24 25

26 27

SCF356

ENGLISH 6

HRVATSKI 20

LIETUVIŠKAI 34

LATVIEŠU 48

ROMÂNĂ 62

SLOVENSKY 77

SLOVENŠČINA 92

SRPSKI 106

УКРАЇНСЬКА 120

General description (Fig. 1)

1. Baby bottle warmer

2. Progress indicator

3. Settings and on/o knob

4. Defrost setting

5. Milk warming setting 1

6. Milk warming setting 2

7. Milk warming setting 3

8. Baby food warming setting

9. On/o button

Important

To fully benet from the support that Philips

oers, register your appliance at

www.philips.com/welcome.

Read this user manual carefully before you

use the baby bottle warmer and save it for

future reference.

Danger

-Never immerse the appliance in water or

any other liquid, nor rinse it under the tap.

Warning

-Only use the appliance indoors.

-This appliances can be used by persons

with reduced physical, sensory or mental

capabilities or lack of experience and

knowledge if they have been given

supervision or instruction concerning use

of the appliance in a safe way and

understand the hazards involved.

ENGLISH

-Cleaning and user maintenance shall not

be made by children.

-This appliance shall not be used by

children. Keep the appliance and its cord

out of reach of children.

-Children shall not play with the appliance.

-Do not immerse the cord, plug or

appliance in water or any other liquid.

-Do not let the mains cord hang over the

edge of a table or worktop. Excess cord

can be stored in the base of the baby

bottle warmer to ensure stability of the

appliance.

-Keep the mains cord away from hot

surfaces.

-Only connect the appliance to an earthed

wall socket. Always make sure that the

plug is inserted into the wall socket

properly.

-Check if the voltage indicated on the

bottom of the appliance corresponds to

the local mains voltage before you

connect the appliance.

-If you need to use an extension cord,

make sure it is an earthed extension cord

with a rating of at least 13 amperes.

-Do not use the appliance if the plug, the

mains cord or the appliance itself is

ENGLISH 7

damaged. If the mains cord is damaged,

you must have it replaced by Philips, a

service centre authorised by Philips or

similarly qualied persons in order to

avoid a hazard.

-Do not place the appliance on or near a

hot gas or electric cooker, or in a heated

oven.

-Do not preheat the appliance.

-Always place a fully assembled bottle

with cap in the baby bottle warmer before

you add water.

-Make sure you add water before you

switch on the baby bottle warmer.

-Hot water can cause serious burns. Be

careful when the baby bottle warmer

contains hot water.

-The accessible surfaces of the appliance

may become hot during use.

-Do not move the appliance when it

contains hot water.

-Always check the baby food temperature

before you feed your child.

Caution

-This appliance is intended to be used in

household and similar applications such

as farm houses, bed and breakfast type

environments, sta kitchen areas in

ENGLISH8

shops, oces and other working

environments, and by clients in hotels,

motels and other residential type

environments.

-Unplug the appliance when it is not in

use.

-Store any excess mains cord in the base

to ensure stability of the baby bottle

warmer.

-Let the appliance cool down before you

clean it.

-Follow the descaling instructions to avoid

irreparable damage.

-Do not try to open or repair the appliance

yourself. You can contact the Philips

Consumer Care Centre in your country

(see www.philips.com/support).

-The food should not be heated for too

long.

-Only use the appliance as described in

the user manual to avoid potential injury

due to misuse.

-The surface of the heating element is

subject to residual heat after use.

Electromagnetic elds (EMF)

This Philips appliance complies with all applicable standards

and regulations regarding exposure to electromagnetic elds.

ENGLISH 9

Using the baby bottle warmer

With this baby bottle warmer, you can safely warm and

defrost milk in Philips Avent feeding bottles and milk or baby

food in containers.

The baby bottle warmer helps to preserve the valuable

nutrients and vitamins in breast milk because it never

overheats the milk. If milk becomes too warm, nutrients and

vitamins are damaged. To help preserve the quality of your

breast milk, it is important to heat the milk in a safe and

controlled way. The baby bottle warmer is designed to warm

gently and evenly and to avoid hot spots, as the milk

circulates during warming. The built-in sensor tracks and

controls the milk temperature, to avoid overheating at all

times.

Note: Philips Avent breast milk bags and Philips Avent

2oz/60ml bottles cannot be used in this baby bottle

warmer.

Explanation of settings

-You can choose between the following settings: (Fig. 2)

-Defrost setting: To defrost a bottle or container with frozen

milk or frozen baby food. No warming occurs.

-Milk warming settings: Select one of these settings when

you want to warm a bottle of milk to a safe temperature.

Setting 2 warms your milk to approximately body

temperature. Setting 1 warms your milk to a slightly lower

temperature and setting 3 warms your milk to a slightly

higher temperature.

-Baby food warming setting: Select this setting when you

want to warm a container or jar with baby food.

Using the baby bottle warmer to warm milk

1 Put the mains plug in the wall socket (Fig. 3).

2 Place a bottle centrally in the baby bottle warmer (Fig. 4).

ENGLISH10

Note: To warm milk in a milk storage container, follow the

same steps as indicated for warming milk in a bottle.

3 Fill the baby bottle warmer with the same amount of

drinking water as the amount of milk you want to warm

up (for example, to warm up 125ml/4oz of milk, you need

to use 125ml/4oz of drinking water). If you want to heat

up a large amount of milk (>180ml/6oz), the maximum

water level is approximately 1cm/0.4 inches under the

rim of the baby bottle warmer (which corresponds to

adding 160ml/4.5oz of drinking water). An accurate water

level ensures correct warming performance. (Fig. 5)

4 Select the desired setting (Fig. 6).

Note: Experience teaches that babies may have a

preference for a specific milk temperature. This can be due

to personal preference or external factors (e.g. environment

temperature). All three settings ensure that the milk is

warmed to a safe temperature which is comfortable for your

child and helps to preserve the nutrients and vitamins in the

milk.

5 Press the on/o button to switch on the appliance. The

light in the button lights up to indicate that the baby

bottle warmer is on (Fig. 7).

Note: The baby bottle warmer starts warming up right after

you press the button.

6 The progress indicator starts to ll up gradually with

white light to show the progress of the milk warming

process (Fig. 8).

Note: The progress indicator shows the progress of the milk

warming process. The progress indicator starts flashing when

the appliance is on. When the first warming phase has been

completed, the bottom segment lights up continuously and

the next segment starts flashing to show that the second

warming phase is in progress. These steps continue until the

third warming phase has been completed. Then the entire

progress indicator lights up continuously.

ENGLISH 11

Note: During the warming process, the milk circulates to

ensure even warming. It takes about 10 minutes to warm

90ml/3oz of room-temperature milk. It takes slightly longer

to warm cold milk or a large amount of milk.

Caution: Do not take the bottle out of the baby bottle

warmer while the progress indicator is ashing.

7 When the entire progress indicator lights up

continuously, the milk has reached the set temperature.

-When the milk is warm, you can either take the bottle out

of the baby bottle warmer to feed your baby right away

(see section ‘Feeding your baby immediately’) or you can

keep it warm in the baby bottle warmer (see section

‘Keeping milk warm’).

Increasing the milk temperature

1 If you want the milk to be warmer, you can increase the

milk temperature gradually after it is ready by switching

to milk warming setting 3 and leaving the bottle in the

appliance at the keep-warm mode (Fig. 9).

2 If you just switched o the baby bottle warmer or if it just

switched o automatically, switch it back on without

removing the warm water from it, and follow the above

step (Fig. 10).

3 The baby bottle warmer switches o automatically after

20 minutes of keep-warm mode (Fig. 11).

Feeding your baby immediately

1 Press the on/o button to switch o the appliance and

take out the milk bottle (Fig. 10).

2 Always check the temperature of the milk before you feed

your baby. Gently swirl the milk in the bottle and check

the temperature of the milk by sprinkling a few drops on

the inside of your wrist (Fig. 12).

3 Unplug the appliance and empty the baby bottle

warmer (Fig. 13).

ENGLISH12

Andere Handbücher für AVENT scf356

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Philips Flaschenwärmer Handbücher

Philips

Philips SCF250/00 Bedienungsanleitung

Philips

Philips AVENT scf356 Bedienungsanleitung

Philips

Philips AVENT SCF66 Series Bedienungsanleitung

Philips

Philips SCF355 Bedienungsanleitung

Philips

Philips AVENT SCF355/07 Bedienungsanleitung

Philips

Philips SBCSC250 Bedienungsanleitung

Philips

Philips SCF256 Bedienungsanleitung

Philips

Philips SCF255/52 Bedienungsanleitung

Philips

Philips AVENT SCF358 Bedienungsanleitung

Philips

Philips SBC SC215 Bedienungsanleitung

Philips

Philips SCF256 Bedienungsanleitung

Philips

Philips SBCSC250/00 Bedienungsanleitung

Philips

Philips AVENT scf356 Bedienungsanleitung

Philips

Philips AVENT Anti-colic Bedienungsanleitung

Philips

Philips AVENT scf356 Bedienungsanleitung

Philips

Philips SCF355 Bedienungsanleitung

Philips

Philips SCF355 Bedienungsanleitung

Philips

Philips SCF355 Bedienungsanleitung

Philips

Philips AVENT scf356 Bedienungsanleitung

Philips

Philips AVENT SCF355/02 Bedienungsanleitung

Philips

Philips AVENT scf356 Bedienungsanleitung

Philips

Philips SBCSC215/87 Bedienungsanleitung

Philips

Philips AVENT SCF358 Bedienungsanleitung

Philips

Philips SCF355 Bedienungsanleitung

Beliebte Flaschenwärmer Handbücher anderer Marken

Topcom

Topcom KD-4302 Bedienungsanleitung

SEVERIN

SEVERIN BK-3177 Bedienungsanleitung

SEVERIN

SEVERIN BK 3176 Bedienungsanleitung

Chicco

Chicco 06867 MU Bedienungsanleitung

Reer

Reer Multimax 2 in 1 -travel Bedienungsanleitung

Lionelo

Lionelo Thermup Go Bedienungsanleitung

TEFAL

TEFAL Disney Baby TD1100K0 Bedienungsanleitung

TrueLife

TrueLife INVIO BW Single Bedienungsanleitung

Gourmia

Gourmia JBW-250 Bedienungsanleitung

König Electronic

König Electronic HC-BW10 Bedienungsanleitung

Gourmia

Gourmia JBW-150 Bedienungsanleitung

NUK

NUK MEDICPRO 10.256.467 Bedienungsanleitung

Petra

Petra DI 6.00 Bedienungsanleitung

Philips AVENT

Philips AVENT Electric Bottle and Baby Food Warmer Bedienungsanleitung

babymoov

babymoov Auto Speed Bib Bedienungsanleitung

Alecto

Alecto BW600 Bedienungsanleitung

Lionelo

Lionelo Thermup Bedienungsanleitung

Vinotemp

Vinotemp VT-Chiller Bedienungsanleitung