Philips GC4928/30 Bedienungsanleitung

TIẾNG VIỆT 45

Sự cố Nguyên nhân c th Gii php

Bn i không phun

hơi nưc. Không c đ nưc trong ngăn

cha. Châm nưc vo ngăn cha nưc (xem

chương ‘Chun b sử dụng’, mục ‘Đ nưc

vo ngăn cha’).

Nút trượt hơi nưc được đặt ở v

trí ‘không c hơi nưc’. Đặt nút trượt hơi nưc ở v trí MAX (Tối

đa) (xem chương ‘Chun b sử dụng’, mục

‘Ci đặt hơi nưc’).

Bn i không đ nng đ tạo hơi

nưc. Đợi cho đến khi đèn SmartLight ngừng

nhấp nhy v sng n đnh.

Bn i không phun

hơi nưc tăng cường. Bạn đã sử dụng chc năng phun

hơi nưc tăng cường qu nhiều

lần trong khong thời gian ngn.

Tiếp tục i ở v trí nm ngang v đợi mt lt

trưc khi sử dụng lại chc năng tăng cường

hơi nưc.

Bn i không đ nng đ tạo hơi

nưc tăng cường. Đợi cho đến khi đèn SmartLight ngừng

nhấp nhy v sng n đnh.

Nưc nhỏ giọt lên

vi trong khi i. Bạn chưa đng kín np ngăn cha

hơi nưc. Ấn vo np cho đến khi nghe thấy tiếng

click.

Bạn đang i trong khi đèn

SmartLight nhấp nhy. Đợi cho đến khi đèn SmartLight sng n

đnh trưc khi i.

Bạn đã cho ha chất vo ngăn

cha nưc. Rửa ngăn cha nưc v không cho nưc

hoa hoặc ha chất vo ngăn cha nưc.

Bn i đ lại vết bng

hoặc vết hn trên

quần o.

Bề mặt được i không phẳng, ví

dụ do bạn i trên đường ni hoặc

vết gấp ca quần o.

Bn i sử dụng an ton trên mọi loại quần

o c th i được. Vết bng hoặc vết hn

không phi l vĩnh viễn v sẽ mất đi khi bạn

giặt quần o. Trnh i trên đường ni hoặc

vết gấp. Bạn cũng c th đặt vi bông trên

khu vực cần i đ trnh vết hn.

GC4900 series

ENGLISH 6

DEUTSCH 14

FRANÇAIS 22

NEDERLANDS 30

TIẾNG VIỆT 38

Introduction

Congratulations on your purchase and welcome to Philips! To

fully benet from the support that Philips oers, register your

product at www.philips.com/welcome.

The new Philips PerfectCare Azur steam iron oers you an

innovative way to iron garments. We all know the fuss with

traditional irons: choosing the right temperature for tough and

delicate fabrics, waiting for the iron to warm up and cool down

to avoid the risk of damaging clothes with a too hot iron. Those

hassles are things of the past with the new Philips PerfectCare

Azur steam iron.

Historically, wrinkle removal was done with a very hot

soleplate, then steam was added to enhance heat transfer

and we could iron much faster. Our research conrmed that

the best way to remove wrinkles eectively is a perfect

combination of intense steam and optimal soleplate

temperature. The key to eective wrinkle removal is the

steam, not the soleplate temperature. To get optimal steam,

the soleplate temperature needs to be just above the steam

temperature.

In the past, a large amount of steam at this optimal

temperature would have led to water leakage. We have

developed a unique steam chamber that generates a

consistent output of moisture-rich steam that penetrates deep

into the fabric for fast ironing with no risk of water leakage.

-Ironing is now really simple: no temperature adjustment, no

scorching, no waiting for the iron to heat up or cool down.

Ironing takes less time, no matter who does it. With this

OptimalTEMP technology, every single garment can be

ironed eectively and safely.

This iron has been approved by The Woolmark Company

Pty Ltd for the ironing of wool-only products, provided that

the garments are ironed according to the instructions on the

garment label and those issued by the manufacturer of this

iron, R1302. In the United Kingdom, Eire, Hong Kong and India,

the Woolmark trademark is a certication trademark.

General description (Fig. 2)

1 Water tank lid

2 Spray button

3 Steam slider

4 Steam boost trigger

5 Mains cord

6 Cord winding area

7 Calc-Clean button

8 SmartLight/Calc-Clean reminder light

9 Soleplate

10 Spray nozzle

ENGLISH

Preparing for use

Filling the water tank

1 Flip open the water tank lid, then ll the water tank up to

the MAX indication.

Type of water to be used

This appliance has been designed to be used with tap water.

If you live in an area with hard water, fast scale build-up may

occur. Therefore, it is recommended to use distilled or de-

mineralized water to prolong the lifetime of the appliance.

Note: Do not put perfume, vinegar, starch, descaling agents,

ironing aids or other chemicals in the water tank, as your

appliance is not designed to work with these chemicals.

Heating up

1 Insert the plug into an earthed wall socket. The SmartLight

starts ashing blue to indicate that the iron is heating up.

2 The SmartLight lights up blue steadily when the iron is

ready for use.

Note: If the colour of the SmartLight is amber instead of

blue, this is a reminder that you should perform Calc-Clean

function. See chapter ‘Cleaning and maintenance section

‘Using the Calc-Clean function’.

OptimalTemp technology

The OptimalTemp technology enables you to iron all types of

ironable fabrics, in any order, without the need to adjust any

temperature setting.

-Fabrics with these symbols are ironable, for example linen,

cotton, polyester, silk, wool, viscose and rayon.

-Fabrics with this symbol are not ironable. These

fabrics include synthetic fabrics such as Spandex

or elastane, Spandex-mixed fabrics and polyolens

(e.g. polypropylene), but also prints on garments.

-Do not iron non-ironable fabrics.

ENGLISH 7

Steam settings

You can set dierent steam settings with the steam slider:

- No steam: to stop steam output when the iron is not in use.

During ironing, always choose ECO or MAX setting.

- ECO: (specic types only) to save energy, reduce the steam

output, and still have sucient steam to iron your garments.

- MAX: to set the maximum steam output, perfect

combination with OptimalTemp setting.

For the best results and shortest ironing time, we strongly

recommend that you iron all ironable fabrics at the setting for

maximum steam output.

1 Make sure there is enough water in the water tank.

2 Push the steam slider to the desired steam setting.

Using the appliance

Ironing

With the OptimalTemp technology, you can iron every single

garment eectively and safely, even delicate fabrics like silk

without having to worry about temperature settings.

1 You can start ironing when the SmartLight stops ashing

and lights up blue steadily. (See chapter ‘Preparing

for use’, section ‘Heating up’).

Note: When resting the iron on heel, it makes a sputtering

sound as water gets

evaporated by the hot soleplate. This is normal.

Features

Spray function

You can use the spray function to moisten the garment to

be ironed. This helps to remove stubborn creases.

1 Make sure there is enough water in the water tank.

2 Press the spray button several times to moisten the

garment to be ironed.

Steam boost function

A steam boost from the soleplate helps removing stubborn

creases. The steam boost enhances the distribution of steam

into every part of the garment.

ENGLISH8

1 Press and release the steam boost trigger.

For optimal steam boost performance, it is recommend to

press the steam boost trigger at intervals of 5 seconds.

Ironing with extra steam

1 For extra steam during ironing, press and hold the steam

boost trigger.

Vertical steam boost

You can also use the steam boost function when you hold the

iron in vertical position.

1 Hold the iron in vertical position, press and release the

steam trigger and touch the garment lightly with the

soleplate.

Tip: Pull the garment with one hand to stretch it for more

eective wrinkle removal.

Hot steam comes out of the iron. Do not remove wrinkles

from a garment while you are wearing it or somebody else

is wearing it. To prevent burns, do not direct the steam at

people.

Safety Auto o

To save energy, the appliance switches o automatically when

it has not been moved for 2 minutes in horizontal position, or 5

minutes when is standing on its heel.

1 The SmartLight starts pulsating slowly when Safety Auto

o mode has been activated.

2 To reactivate the iron, simply move it. The SmartLight

ashes blue to indicate that the iron is heating up, and it

lights up steadily when the iron is ready for use.

Note: The steam iron is not switched o completely when it is

in Safety Auto o mode. Unplug the iron to switch it o.

ENGLISH 9

Ironing tips

Minimising wrinkles while drying

Start wrinkle removal early in the drying process by spreading

out the laundry properly after washing. Put the garments on

hangers to make them dry naturally with less wrinkles.

Shirt ironing

Start with the time-consuming parts such as collar, cu links

and sleeves. Next, iron the bigger parts like front and back. By

doing this, you prevent wrinkling the bigger parts when you are

busy ironing the time-consuming ones.

Collar: When you iron a collar, start on its underside and iron

from the outside (the pointy end) inwards. Turn over and

repeat. Fold down the collar and press the edge for a crisp

nish.

Buttons: Iron on the reverse side of the buttons for more

eective and faster ironing.

Cleaning and maintenance

Cleaning

1 Set the steam slider to the ‘no steam’ position, remove the

plug from the wall socket and let the iron cool down.

2 Wipe akes and any other deposits o the soleplate with a

damp cloth and a non-abrasive (liquid) cleaning agent.

To keep the soleplate smooth, avoid hard contact with metal

objects. Never use a scouring pad, vinegar or other chemicals

to clean the soleplate.

3 Clean the upper part of the iron with a damp cloth.

4 Regularly rinse the water tank with water. Empty the water

tank after you have rinsed it.

Calc-Clean System

-The Anti-Calc tablet prevents scale from clogging the steam

vents. This tablet is constantly active and does not need to

be replaced.

-The Calc-Clean function removes the scale particles from

the iron.

-The Calc-Clean reminder light reminds you to use the Calc-

Clean function after a certain period of use.

Tip: Use the Calc-Clean function every month (for specific

types only, without the Calc-Clean reminder light).

ENGLISH10

Calc-Clean reminder light (specic types only)

-After a certain period of use, the colour of the SmartLight

changes to amber. Then you need to perform the Calc-

Clean process.

Tip: If the water in your area is hard (e.g. when flakes come

out of the soleplate during ironing), use the Calc-Clean

function more frequently.

Note: The SmartLight resets itself automatically and lights up

blue the next time you plug in the iron, even if you have not

performed the Calc-Clean process.

Do not put vinegar or other descaling agents in the water tank.

Using the Calc-Clean function

1 Make sure the appliance is unplugged.

2 Set the steam slider to ‘no steam’.

3 Fill the water tank to the MAX level.

4 Insert the plug in an earthed wall socket.

5 Wait for the SmartLight to light up steadily, then unplug

the iron.

6 Hold the iron over the sink, press and hold the Calc-Clean

button and gently shake the iron to and fro.

Note: Steam and boiling water come out of the soleplate.

Impurities and flakes (if any) are flushed out.

7 Release the Calc-Clean button as soon as all the water in

the tank has been used up.

8 Repeat steps 1 to 7.

After the Calc-Clean process

1 Put the plug back into the wall socket, and let the iron

heat up to let the soleplate dry.

2 When the SmartLight lights up steadily, move the iron

gently over a piece of used cloth to remove any water

stains that may have formed on the soleplate.

3 Unplug the iron and let it cool down before you store it.

Storage

1 Slide the steam slider to ‘no steam’.

2 Remove the plug from the wall socket.

3 Empty the water tank and let the iron cool down in a safe

place.

ENGLISH 11

4 Wind the mains cord around the cord winding area and x

it with the cord clip. Put the mains cord below the CordFix

indication to ensure the mains cord does not touch the hot

soleplate during storage.

5 Store the iron on its heel in a safe and dry place.

Troubleshooting

This chapter summarises the most common problems you

could have with the appliance. If you are unable to solve the

problem with the information below, visit www.philips.com/

support for a list of frequently asked questions or contact the

Consumer Care Centre in your country.

Problem Possible cause Solution

The iron cannot

remove wrinkles

from the garment.

There is no steam during

ironing.

Put water inside the water tank. Set

the steam slider to MAX.

Water drips from

the soleplate after

the iron has been

unplugged or has

been stored.

The steam slider is set to

MAX.

Set the steam slider to ‘no steam’.

You have put the iron in

horizontal position with

water still left in the water

tank.

Empty the water tank.

The light on the

iron is amber

instead of blue,

and keeps ashing.

The Calc-Clean reminder

light has been activated.

This is a regular reminder

for you to descale the

appliance.

Perform the Calc-Clean process

(see chapter ‘Cleaning and

maintenance’, section ‘Calc-Clean

System’).

The SmartLight

pulsates slowly.

The Safety Auto-o mode

is active. The iron has

switched to standby mode

(see chapter ‘Safety Auto-

o’).

Move the iron to reactivate it.

The iron starts heating up again.

Start ironing again only when the

SmartLight lights up steadily.

ENGLISH12

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Philips Eisen Handbücher

Philips

Philips Powerlife GC2910/20 Bedienungsanleitung

Philips

Philips PerfectCare Xpress GC5057 Bedienungsanleitung

Philips

Philips GC8261 Bedienungsanleitung

Philips

Philips Mistral GC2225 Bedienungsanleitung

Philips

Philips GC4900 Bedienungsanleitung

Philips

Philips ComfortCare GC 2710 Bedienungsanleitung

Philips

Philips EasySpeed Plus GC2049 Series Bedienungsanleitung

Philips

Philips GC6360 Bedienungsanleitung

Philips

Philips GC4900 Bedienungsanleitung

Philips

Philips GC7844 Bedienungsanleitung

Philips

Philips RI3620/12 Bedienungsanleitung

Philips

Philips GC9236 Bedienungsanleitung

Philips

Philips Mistral GC2425 Bedienungsanleitung

Philips

Philips GC7039/20 Bedienungsanleitung

Philips

Philips powerlife plus GC2980 series Bedienungsanleitung

Philips

Philips GC6815 Bedienungsanleitung

Philips

Philips Perfect Care Elite Plus GC9660 Bedienungsanleitung

Philips

Philips EasyCare GC3260 Bedienungsanleitung

Philips

Philips GC7020/02 Bedienungsanleitung

Philips

Philips FC7010 Bedienungsanleitung

Philips

Philips GC6611 Bedienungsanleitung

Philips

Philips Insta Press GC9500 Bedienungsanleitung

Philips

Philips Azur GC4310 Bedienungsanleitung

Philips

Philips GC7900 Series Bedienungsanleitung

Beliebte Eisen Handbücher anderer Marken

Clatronic

Clatronic DB 3703 Bedienungsanleitung

TEFAL

TEFAL FV4093Z0 Bedienungsanleitung

Gorenje

Gorenje SIH 2200 BS Bedienungsanleitung

Bosch

Bosch 2 Series Bedienungsanleitung

Riffel

Riffel Catena KB-819 Bedienungsanleitung

Texi

Texi Hestia Bedienungsanleitung

Maxwell

Maxwell MW-3010 Bedienungsanleitung

TREVIDEA

TREVIDEA Girmi ST60 Bedienungsanleitung

Primula

Primula Vapormat Bedienungsanleitung

Magio

Magio MG-541 Bedienungsanleitung

Scarlett

Scarlett SC-1334S Bedienungsanleitung

Bosch

Bosch Sensixx B22L Bedienungsanleitung

Vitek

Vitek VT-1247 VT Bedienungsanleitung

Cleanmaxx

Cleanmaxx 3397 Bedienungsanleitung

dyras

dyras ESI-2400AC Bedienungsanleitung

GE 169061 Bedienungsanleitung

Gorenje

Gorenje SIH 2200 GC Bedienungsanleitung

AEG

AEG DBS 5591 Bedienungsanleitung