Philips Day-Brite Bedienungsanleitung

Use Flexible Conduit Only

INSTALLATION INSTRUCTIONS

FOR EMERGENCY LIGHTING

Package Contents

Part Description Quantity

Emergency Lighting

Hardware Kit

Warnings and Cautions

READ AND FOLLOW ALL SAFETY INSTRUCTIONS.

1. Review the diagrams thoroughly before beginning. If you feel you do not have electrical wiring experience, refer to a do-it

yourself wiring handbook or have your fixture installed by a qualified licensed electrician.

2. All electrical connections must be in accordance with local codes, ordinances, and the National Electric Code. If you are

unfamiliar with methods of installing electrical wiring,secure the services of a qualified licensed electrician.

3. Before starting the installation, disconnect the power by turning off the circuit breaker or by removing the appropriate fuse at

the fuse box. Turning the power off using the light switch is not sufficient to prevent electrical shock.

4. Do not use outdoors.

5. Do not mount near gas or electric heaters.

6. Use cautions when servicing batteries. Battery acid can cause burns to skin and eyes. If acid is spilled on skin or in eyes, flush

acid with fresh water and contact a physician immediately.

7. Equipment should be mounted in location and at heights where it will not readily be subject to tampering by unauthorized

personnel.

8. The use of accessory equipment not recommend by the manufacturer may cause an unsafe condition.

9. Do not use this equipment for other than intended use.

10. All servicing should be performed by qualified personnel only.

11. Allow battery to charge for 24 hours before first use.

SAVE THESE INSTRUCTIONS

Rev A 11/10 Page 1 of 2

IMPORTANT SAFEGUARDS

Mounting Instructions

NOTE: First turn off electricity.

1. Remove mounting plate from fixture.

2. Knockout in back of mounting plate and push wires through

the hole.

3. Securely attach mounting plate to J-box.

Transformer Connect to PCB Ass'y

PCB Ass'y

Mounting Plate

Transformer

6. Connect red lead to battery positive terminal.

Red Wire

Battery

7. Snap fixture onto mounting plate and ensure no wires are

pinched. Make sure unit is fully attached.

8. Restore power and press test button. Battery powered bulb

will come on. AC light will turn off

5. Connect transformer to PCB Ass'y.

Pipe(Not provided)

Pipe Connector

Nut

Screw

Wall Mounting

Ceiling Mounting

1. Open top cover and knockout on the top of fixture.

2. Secure the mounting plate to tube with nut.

knockout

Junction Box

(Not provided)

BLACK

WHITE

ORANGE

120VAC

INPUT

277VAC

INPUT

ELECTRICAL CONNECTIONS:

Connect white wire lead from fixture to white (neutral) wire supply

feed from circuit. Connect black (120V) or orange (277V)

(depending on supply voltage) wire lead from fixture to black(hot)

wire from supply circuit.Use U.L. Listed wire connectors suitable

for the size, type, and number of conductors. No loose strands or

loose wires should be present. Secure wire connectors with U.L

listed electrical tape

3. Reference 4 - 8 step in wall mounting above for ceiling

mounting.

Rev A 11/10 Page 1 of 2

Philips Day-Brite • 776 South Green Street • Tupelo, MS 38804

662-842-7212 • Fax 662-841-5501 • www.daybrite.com

Inhaltsverzeichnis

Andere Philips Beleuchtungsausrüstung Handbücher

Philips

Philips StoreSet Linear SM504TI Bedienungsanleitung

Philips

Philips bodine B30 Bedienungsanleitung

Philips

Philips ColorGraze Powercore Bedienungsanleitung

Philips

Philips eW Reach Powercore Bedienungsanleitung

Philips

Philips eW Cove QLX Powercore Bedienungsanleitung

Philips

Philips L 1250 - HPM Bedienungs- und Wartungsanleitung

Philips

Philips Bodine Cold-Pak B4CF1 Bedienungsanleitung

Philips

Philips Ballasts For Fluorescent Lamps Bedienungsanleitung

Philips

Philips Stylid Evo Compact Bedienungsanleitung

Philips

Philips hue 17466 V7 Series Bedienungsanleitung

Philips

Philips SL PAR 150 Bedienungsanleitung

Philips

Philips 57948-17-16 Bedienungsanleitung

Philips

Philips HP8550 Bedienungsanleitung

Philips

Philips VARILITE VLX3 Bedienungsanleitung

Philips

Philips Selecon PL1 Series Bedienungsanleitung

Philips

Philips RD6 Bedienungsanleitung

Philips

Philips FL80 Montage- und Wartungsanleitung

Philips

Philips InteGrade LED engine system Bedienungsanleitung

Philips

Philips Disney Softpal Mickey Bedienungsanleitung

Philips

Philips LEKO LITE Luminaires Bedienungsanleitung

Philips

Philips Lightolier Lytespan 23C39T4 Bedienungsanleitung

Philips

Philips Selecon PL3 LED Luminaires Bedienungsanleitung

Philips

Philips Lightolier Kubik 1.5 SL111A1 Bedienungsanleitung

Philips

Philips TrueLine SM530C Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung