Philips TownTune BDP260 Bedienungsanleitung

BGP221/231

TownTune

Central Post-Top

1/12

583 443000020784_A

Photobiological Risk

Luminaire Surge Protection

Luminaire Surge Protection with SPD *optional

RG1 (valid for Neutral and Warm White)

DM/CM 6/8 kV (C-I/C-II)

DM/CM 10/10 kV (C-I) - 10/8 kV (C-II) - 10/10 kV (C-II) (optional ground for installer)

Printed in Spain

Data subject to change without notice

Keep for future reference: www.philips.com/lighting

740

LED14 12 10 1400

0,042 6,8kg*

LED16 12 11 1600

LED18

12 12

1800

LED20

12 13

2000

LED22

12 14

2200

LED24

12 16

2400

LED27

12 18

2700

LED30

12 20

3000

LED35

12 24

3500

LED39

12 27

3900

LED45

20 29

4500

LED50

20 32

5000

LED55

20 35

5600

LED59

20 38

6000

LED64

20 42

6400

LED69

40 41

7000

LED74

40 44

7400

LED79

40 47

8000

LED84

40 50

8400

LED90

40 53

9000

LED94

40 56

9400

LED100

40 60

10000

BDP260/261/262/263

Standard luminaire housing BDP260 is IK10. Added accessories are rated at IK08.

As accessories are not a structural part of the luminaire housing, the IK rating for the luminaire housing remains IK10.

2/12

Temperature protection:

The LED drivers have temperature protection circuits to switch o the output when the device gets too warm.

Power will return automatically when the temperature has dropped again.

Remark:

Photometric data will be provided upon customer request.

830

LED12

12 10

1200

0,042 6,8kg*

LED14

12 12

1400

LED16

12 13

1600

LED18

12 15

1800

LED20

12 16

2000

LED22

12 18

2200

LED24

12 20

2400

LED27

12 22

2700

LED30

12 25

3000

LED35

20 28

3500

LED39

20 31

4000

LED45

20 36

4500

LED50

20 40

5000

LED55

40 40

5600

LED59

40 43

6000

LED64

40 47

6400

LED69

40 51

7000

LED74

40 55

7400

LED79

40 59

8000

Surface to the wind (m2) without embellishment accesories

* Weight without mounting devices

Weight of decorative ring 0,6 kg

Weight of top accessory cone 1,1 kg

Weight of top accessory dome 0,8 kg

WARNING

This luminaire must be installed only by qualied personnel.

If the external exible cable or cord of this luminaire is damaged, it shall be

exclusively replaced by the manufacturer or his service agent or a similar

qualied person in order to avoid a hazard.

The light source contained in this luminaire shall only be replaced by the

manufacturer or his service agent or a similar qualied person

Disconnect before servicing

Use gloves to manipulate the luminaire

The space between lyre and luminaire could be a pinch point

Keep hands clear during operation.

Free rotation of the lyre can cause damage in painted parts

Follow this mounting instructions to x install and maintain

Never modify the luminaire or the xations

Risk of accident due to incorrect tightening torque

TOWNTUNE CENTRAL POSTTOP

(Wind surface 0,042m2 / SCx 0,033m2 )

TOWNTUNE CENTRAL POSTTOP DR

(Wind surface 0,066m2/ SCx 0,036m2 )

TOWNTUNE CENTRAL POSTTOP DTD

(Wind surface 0,082m2/ SCx 0,039m2 )

TOWNTUNE CENTRAL POSTTOP DR DTD

(Wind surface 0,11m2/ SCx 0,057m2 )

TOWNTUNE CENTRAL POSTTOP DTC

(Wind surface 0,11m2/ SCx 0,052m2 )

TOWNTUNE CENTRAL POSTTOP DR DTC

(Wind surface 0,13m2/ SCx 0,071m2 )

3/12

OPEN / CLOSE / MOUNTING CABLE

LC05 VERSION

STANDARD VERSION

Allowed cable range Ø5-Ø8,7-Ø12 mm

4/12

DECORATIVE RING FIXATION

SPIGOT FIXATION

5/12

MOUNTING OF PHOTOCELLS

Citytouch OLC COM SR

Citytouch OLC NEMA SR

6/12

TYPES OF MAIN CONNECTION STANDARD VERSION

(PSU) (PSA) (PSDD) CONNECTION

Class-I Class-II

3LINE

(Brown) 1LINE

(Brown)

NNEUTRAL

(Blue) 2NEUTRAL

(Blue)

GROUND

(Yellow &

Green)

(Optional

for installer)

GROUND

1 - 4 -

2 - 5 -

(PSD) CONNECTION

Class-I Class-II

3LINE

(Brown) 1LINE

(Brown)

NNEUTRAL

(Blue) 2NEUTRAL

(Blue)

GROUND

(Yellow &

Green)

(Optional

for installer)

GROUND

1 DALI 4 DALI

2 DALI 5 DALI

(PSR) CONNECTION

Class-I Class-II

3LINE

(Brown) 1LINE

(Brown)

NNEUTRAL

(Blue) 2NEUTRAL

(Blue)

GROUND

(Yellow &

Green)

(Optional

for installer)

GROUND

1 - 4 -

2 Lineswitch 5 Lineswicth

7/12

TYPES OF MAIN CONNECTION LC05 VERSION

(PSU) (PSA) (PSDD) CONNECTION

Class-I Class-II

LLINE

(Brown) LLINE

(Brown)

GROUND

(Yellow &

Green)

NNEUTRAL

(Blue)

NNEUTRAL

(Blue) - -

(PSD) CONNECTION

Class-I Class-II

LLINE

(Brown) LLINE

(Brown)

GROUND

(Yellow &

Green)

NNEUTRAL

(Blue)

NNEUTRAL

(Blue) DA DALI

DA/L DALI DA DALI

DA/N DALI --

(PSD) CONNECTION (with Surge Protection) (PSU) (PSA) (PSDD) CONNECTION (with Surge Protection)

Class-II

LLINE

(Brown) LLINE

(Brown)

(Optional for

installer)

GROUND

(Optional for

installe)

GROUND

NNEUTRAL

(Blue) NNEUTRAL

(Blue)

DA DALI - -

(PSR) CONNECTION

Class-I Class-II

LLINE

(Brown) LLINE

(Brown)

GROUND

(Yellow &

Green)

(Optional for

installer)

GROUND

NNEUTRAL

(Blue) NNEUTRAL

(Blue)

Lc LineSwich Lc LineSwich

(PHOTOCELL) CONNECTION

Class-I Class-II

LLINE

(Brown) LLINE

(Brown)

GROUND

(Yellow &

Green)

(Optional for

installer)

GROUND

NNEUTRAL

(Blue) NNEUTRAL

(Blue)

8/12

CLEANING

The luminaire is protected against water ingress to IP66. Sealed design ensures that this rating

will be maintained over the full lifetime of the product.

The luminaire may be cleaned by brush with short&soft bristles.

Extra care must be taken when cleaning around the external cables and

connector in order to prevent damage.

Do not use high pressure water jet or high pressure cleaners.

If clear water is not sucent for cleaning, use a neutral, synthetic, not-scratching and non-abrasive

subtances.

Never use alkaline and/or acetous cleaning substances. Make sure that cleaning substance is fully

removed by rinsing with clean water.

Full Prog Coded Mains System Ready

The maximum number of luminaires with driver

40W to be connected in MCB 16A TYPE B

(mains impedance 200 m + 400 µH)

20 20 21

Inrush current lpeak* 22 A 22 A 21 A

Inrush current Twidth ** 290 µs 290 µs 300 µs

* input voltaje 230V

** input voltaje 230V, measured at 50% lpeak

Full Prog Coded Mains System Ready

The maximum number of luminaires with driver

75W to be connected in MCB 16A TYPE B

(mains impedance 200 m + 400 µH)

11 11 6

Inrush current lpeak* 65 A 65 A 21 A

Inrush current Twidth ** 330 µs 330 µs 300 µs

* input voltaje 230V

** input voltaje 230V, measured at 50% lpeak

9/12

10/12

Have you already downloaded the

Philips Service tag app?

It helps you make LED maintenance easier and faster!

1.Download the app

App herunterladen

Descargar la app

Télécharger l’application

iOS

Android

2.Place tag on the fuse box

Stelle den Tag auf den Sicherungskasten

Colocar la etiqueta en la caja de fusibles

Placer le tag sur le boîtier appareillage

3.Register the product

Produktregistrierung

Registrar el producto

Enregistrer le produit

And also…

Und ebenso... Y también... Et aussi...

SPARE PARTS

Mounting instructions

Montageanleitung

Instrucciones de montaje

Instructions de montage

Troubleshooting

Problembehebung

Resolución de problemas

Dépannage

Spare parts list

Ersatzteilliste

Listado de repuestos

Liste des pièces de rechange

Driver re-programming

Treiber Neuprogrammierung

Reprogramación del driver

Reprogrammation du Driver

Want to know more about Service tag?

Go to www.philips.com/servicetag

10 KV PROTECTION

10kV extra surge protection

(SRG10) is ensuring Di󰀨erential

mode protection.

In class II:

In order to also cover Common

mode, PE(Protective Earth)

connection to the SPD is to be

added at installation. Surges due

to discharge for electrostatic elds

(ESD) are not covered when

installed onto insulated material

poles (to protect an equipotencial

connection is required between

the metal housing of the luminaire

and the earth; in that case it is

better to use a Class I (luminaire).

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Philips Außenleuchte Handbücher

Philips

Philips SV16 Series Bedienungsanleitung

Philips

Philips hue Calla Large Bedienungsanleitung

Philips

Philips Ecomoods 169158716 Bedienungsanleitung

Philips

Philips Ecomoods 16904/87/16 Bedienungsanleitung

Philips

Philips 168568716 Bedienungsanleitung

Philips

Philips Luma BGP 702 Bedienungsanleitung

Philips

Philips 163414716 Bedienungsanleitung

Philips

Philips 16942-93-16 Bedienungsanleitung

Philips

Philips ecoMOODS 16914/93/16 Bedienungsanleitung

Philips

Philips 16351 16 Series Bedienungsanleitung

Philips

Philips Ecomoods 169108716 Bedienungsanleitung

Philips

Philips Ledino 16807/87/16 Bedienungsanleitung

Philips

Philips 169439316 Bedienungsanleitung

Philips

Philips Ecomoods 169179316 Bedienungsanleitung

Philips

Philips ecoMOODS 16916/93/16 Bedienungsanleitung

Philips

Philips 169349316 Bedienungsanleitung

Philips

Philips 163568716 Bedienungsanleitung

Philips

Philips 169339316 Bedienungsanleitung

Philips

Philips Ledino 16811/87/16 Bedienungsanleitung

Philips

Philips 915B403001 Bedienungsanleitung

Philips

Philips BRP710 Bedienungsanleitung

Philips

Philips Hue 17365 VN Series Bedienungsanleitung

Philips

Philips 169444716 Bedienungsanleitung

Philips

Philips 168068716 Bedienungsanleitung

Beliebte Außenleuchte Handbücher anderer Marken

Sealey

Sealey LED37 Bedienungsanleitung

nordlux

nordlux VEJERS Benutzerhandbuch

SImx

SImx ELITE LED LHTC637 Bedienungsanleitung

GEV

GEV CAROLINE 10833 Bedienungsanleitung

NEBO

NEBO NEB-LSP-0020 Bedienungsanleitung

WE-EF

WE-EF PFL540 LED Bedienungsanleitung

Lindby

Lindby 9949029 Bedienungsanleitung

HEPER

HEPER DOGO Side LW6048.585-US Montage- und Bedienungsanleitung

HEPER

HEPER LW8034.003-US Montage- und Bedienungsanleitung

Maretti

Maretti VIBE S 14.6080.04.A Bedienungsanleitung

BEGA

BEGA 84 253 Handbuch

HEPER

HEPER MINIMO Montage- und Bedienungsanleitung

LIGMAN

LIGMAN BAMBOO 3 Bedienungsanleitung

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Bedienungsanleitung

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Bedienungsanleitung

urban ambiance

urban ambiance UQL1273 Bedienungsanleitung

TotalPond

TotalPond 52238 Bedienungsanleitung

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Bedienungsanleitung