Philips Perfect replacement SRP2003 Bedienungsanleitung
SRP2003/27
Register your product
and get support at
www.philips.com/welcome
EN User Manual 3
ES Instrucciones de manejo 15
FR Mode d’emploi 29
SRP2003_27__Manual_80_210.indd 1 25-09-09 11:06
2
2
3
4
5
1
8
6
9
7
7
SRP2003_27__Manual_80_210.indd 2 25-09-09 11:06
3EN
Tableofcontents
1 YourSRP2003......................................... 3
2 Gettingstarted....................................4-9
2.1 Inserting the batteries ........................... 4
2.2 Testing the universal remote
control ........................................................4-5
2.3 Setting up the universal remote
control ........................................................5-9
3 Usingtheuniversalremote
control................................................ 9-11
3.1 Keys and functions ...........................9-11
3.2 Resetting a key to its original
function ........................................................11
4 Serviceandsupport......................12-14
4.1 Frequently asked questions ......12-13
4.2 Need help? ................................................14
FCC Compliancy ....................................14
Notice for Canada ................................14
Helpline .......................................................43
Brand list .............................................44-55
1
YourSRP2003
Congratulations on your purchase of the Philips
SRP2003 universal remote control. After setting
up the remote control you can operate up to 3
different devices with it.
SimpleSetup
Improved with Philips patented (pending)
Simple Setup technology, the SRP2003 can be
set up easily for TV, DVD player / recorder and
all common Cable, Satellite and other set top
boxes, such as DirecTV, Comcast, AT&T, Verizon,
Time Warner, Scientific Atlanta, Tivo and many
more.
Simply follow the instructions in chapter 2.3 to
set up the remote control for your devices.
To fully benefit from the support that Philips
offers, register your product at
www.philips.com/welcome.
YourSRP2003 English
SRP2003_27__Manual_80_210.indd 3 25-09-09 11:06
4EN
2
Gettingstarted
2.1 Insertingthebatteries
• Insert 2 AAA type
batteries, noting the
+ and -
configuration in the
battery
compartment.
Note
When replacing the batteries, all user settings
will be retained in the remote control
memory for 5 minutes.
2.2 Testingtheuniversalremote
control
It is advised to test whether your device(s)
already respond(s) to the SRP2003 before
setting it up (see chapter 2.3). The example
below instructs you how to do this for your
TV. You can repeat the same steps for other
devices (DVD player/recorder and Cable/
Satellite box) which you want to operate using
the SRP2003.
Example:testingtheuniversalremotecontrol
onyourTV:
1 SwitchON your TV manually or use the
original remote control for this. Tune to
channel 1.
2 Press the
device selection key
to select TV.
• The red Setup
light lights up.
• If the light does not
light up, check whether the batteries are
properly inserted (see chapter 2.1).
SRP2003_27__Manual_80_210.indd 4 25-09-09 11:06
5EN
3 Check whether the
keys that you need
for operating your
TV are working. For
an overview of the
keys and their
functions see chapter 3.1.
• If the TV responds as it should to all
of the key commands, the SRP2003 is
ready for use.
• Ifthedevicedoesnotrespondatallor
nottoallofthekeycommands,followthe
instructionsinchapter2.3.
2.3 Settinguptheuniversalremote
control
This is only necessary if your device does not
respond to the SRP2003. If that is the case, the
SRP2003 does not recognize the brand and / or
model of your device and you need to set up
the remote control to do so.
The example below instructs you how to do this
for your TV. You can repeat the same steps for
other devices (
DVD player/recorder and Cable/
Satellite box
) which you want to operate, using
the SRP2003.
The remote control can be set up to operate
any 3 of the following devices:
Devicename Description
TV Traditional TV, at screen
TV and projection TV, TV
part of TV / VCR, TV / VCR
/ DVD and TV / DVD
combos
DVD DVD player / recorder
(DVDR), DVD / Hard
Disk Drive combination
(DVDR-HDD), Blu-Ray
player, High Denition
DVD player (HD-DVD),
DVD part of TV / DVD, TV
/ VCR / DVD and VCR /
DVD combos
Gettingstarted English
SRP2003_27__Manual_80_210.indd 5 25-09-09 11:06
6EN
CBL/SAT Cable box, satellite
receiver, Internet Protocol
TV (IPTV), Free To Air TV,
High Denition Television
decoder (HDTV) and Tivo
Example:settinguptheuniversalremote
controltooperateyourTV:
1 SwitchON the TV manually or use the
original remote control for this. Tune to
channel 1.
2 Pressandholdthe
device selection
key for5seconds
until the red Setup
light remains lit .
The remote control
is now in setup mode.
3 Look up the 4-digit
code for your brand
in the
brand list
at
the back of this user
manual.
A 4-digit code is
shown for each brand.
Use the digit keys
to enter the code
for your brand
(e.g. Philips,
).
• If the red Setup
light turns off, an invalid code was
entered. In this case, try again.
4 Aim the remote
control at the TV.
Pressandhold the
key. Release it
immediately as soon
the TV switches off.
• This step normally takes between
5 and 60 seconds. In extreme
circumstances this step can take up to
15 minutes.
5sec.
5-60sec.
5-60 SEC
.
SRP2003_27__Manual_80_210.indd 6 25-09-09 11:06
7EN
5 SwitchON the TV.
Try out the keys
you need for
operating it. Try, for
example, if the - CH
+ and digit keys
function properly.
• If a key does not work as expected, press
andhold that key. Release it immediatelyas
soon as it works. For more information, see
chapter 2.3.2.
6 Press the
device selection key
twice to finish setup.
• When no key
is pressed for
5 minutes or
more, the remote control will exit setup
mode, automatically saving all your
settings.
Important
If you made a mistake:
• Press the device selection key twice to exit
setup. The red Setup light turns off.
•
Restart from the beginning.
• Ifthedevicedoesnotrespondatallornotto
allofthekeycommandsorifyoucannotfind
thecodeforyourbrand,enter‘9,9,9,9’instep
3andcontinuewithstep4.Theremotecontrol
willnowsearchitsfulldatabaseforacode
thatworkswithyourTV.Fulldatabasesearch
maytakeupto15minutes.
2.3.1 Settinguptheremotecontrolfor
otherdevices(
DVD player/recorder
and Cable/Satellite box
)
1 Make sure the device is turned on, fully
operational and able to respond to remote
control commands. E.g. insert a disc in the
DVD player / recorder or a video cassette in
the VCR.
2 Then follow steps 2 to 6 of ‘Setting up the
remote control for your TV’. Make sure to
use the correct device selection key: or
.
Gettingstarted
2x
English
SRP2003_27__Manual_80_210.indd 7 25-09-09 11:06
8EN
2.3.2 Improvingkeys
When correctly set up, the remote control
should be able to operate all your devices.
However, when using the remote control for the
first time it might occur that some keys do not
yet function as expected.
In this case you can have the remote control
search for alternatives.
Note
Improving keys is not possible when the code
was found during full database search (with
code ‘9, 9, 9, 9’).
Duringinitialsetup
1 Make sure the receiving device is able to
respond. E.g. when you try to repair the Play
key for your DVD player, make sure to insert
a DVD into the DVD player otherwise the
Play key is not able to function.
2 Press the key that does not function, keep it
pressed and immediately release it when the
device responds. Repeat this for every key
that does not function.
• If the key still does not function as expected,
try pressing it again for a longer period of
time.
Afterinitialsetup
1 Make sure the receiving device is able to
respond. E.g. when you try to repair the Play
key for your DVD player, make sure to insert
a DVD into the DVD player otherwise the
Play key is not able to function.
2 Select the device
that you wish to
operate
(e.g. DVD).
Press the device
selection key to
select DVD.
3 Keep keys
and
pressed
simultaneouslyfor5
seconds.
• The red Setup
light lights
up. The remote control is now in setup
mode.
5sec.
SRP2003_27__Manual_80_210.indd 8 25-09-09 11:06
9EN
English
4
Pressandhold the key that does not
function and immediately release it when
the device responds.
• If the key still does not function as expected,
try pressing it again for a longer period of
time.
5 Press the device
selection key twice
to save your settings
and exit setup
mode.
• When no key
is pressed for 5 minutes or more, the
remote control will exit setup mode,
automatically saving all your settings.
3Usingtheuniversal
remotecontrol
3.1 Keysandfunctions
The illustration on page 2 gives an overview of
all keys on the remote control. Try out the keys
you need for operating your devices.
Notes
• Keys having the same functions as the
keys on your original remote control may
have different namings on the SRP2003
(e.g. Info / Display).
• Only functions that are available on your
original remote control can be used for
operating your devices with the SRP2003.
1 .................................... Setup light.
• lights up red when the
remote control is in
setup mode.
• lights up red when
a remote control
command is being sent.
2 ............................... selects available source
inputs (antenna, cable,
etc.).
3 .................. device selection keys.
Select the device to be
operated.
Usingtheuniversalremotecontrol
2x
SRP2003_27__Manual_80_210.indd 9 25-09-09 11:06
10 EN
4
GUIDE ....................... electronic program guide.
MENU ........................ menu on / off.
INFO........................... on-screen channel
information.
EXIT ............................ exits / clears on-screen
menu displays.
3 4 1 2 ............... cursor up, down, left,
right in a menu.
OK ............................... confirms your selection.
A,B,C,D ..................
Context sensitivity keys,
ordered following the
requirements for cable
boxes.
A - Yellow, B - Blue, C - Red,
D - Green.
5
+VOL- ...................... adjusts TV volume.
................................ mutes TV sound.
................................ previous program / Last.
+CH- ....................... previous / next channel.
6
5 .................................. rewind.
2 .................................... play.
6 .................................. fast forward.
9 .................................... stop.
0 ................................... record.
; ..................................... pause.
4P3P ........................ previous (4P) / next
(3P) page / track in
various modes.
/ ....................... set your Thumb ratings.
7 ................................ used after direct channel
selection. Some devices
require ENTER to be
pressed after channel
selection.
..........................selects between one
and two-figure channel
numbers.
SRP2003_27__Manual_80_210.indd 10 25-09-09 11:06
Andere Handbücher für Perfect replacement SRP2003
1
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Philips Fernbedienung Handbücher
Philips
Philips SRC3036/27 Installations- und Betriebshandbuch
Philips
Philips SRP1101/10 Bedienungsanleitung
Philips
Philips SBC RU644/05 Bedienungsanleitung
Philips
Philips SRP3011 Bedienungsanleitung
Philips
Philips SRU3030/10 Bedienungsanleitung
Philips
Philips PM525S - Phlips 5 Device Universal Remote... Bedienungsanleitung
Philips
Philips SRU4002X/10 Bedienungsanleitung
Philips
Philips TSU9400/93 Sicherheitsleitfaden
Philips
Philips SRP 3004/53 Bedienungsanleitung
Philips
Philips SBC RU 455 Bedienungsanleitung
Philips
Philips SRU 5020/87 Bedienungsanleitung
Philips
Philips SRP5004/86 Bedienungsanleitung
Philips
Philips EasyLink 28PT7202/12 Bedienungsanleitung
Philips
Philips SRP6011 Bedienungsanleitung
Philips
Philips RC1974503/00RF Bedienungsanleitung
Philips
Philips KWR101803/01B Bedienungsanleitung
Philips
Philips Prestigo SRU6006/27 Bedienungsanleitung
Philips
Philips SBCRU880/10C Bedienungsanleitung
Philips
Philips SBC RU 520 Bedienungsanleitung
Philips
Philips SRU5150/86 Bedienungsanleitung
Beliebte Fernbedienung Handbücher anderer Marken
Panasonic
Panasonic EUR7622KB0 Bedienungsanleitung
Bang & Olufsen
Bang & Olufsen Beo4 Bedienungsanleitung
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung
Multiplex
Multiplex PROFI TX 9 Bedienungsanleitung
One Remote
One Remote RMB4 Bedienungsanleitung
FUTABA
FUTABA 9ZAP - PART2 Bedienungsanleitung
