Philips SRP2018 Bedienungsanleitung

TAPR802

www.philips.com/support

User manual

Universal Remote

SRP2018

1EN

Contents

1 Your universal remote 2

Introduction 2

2 Get started 3

Insert batteries (not included) 3

Set up the universal remote 4

3 Use your universal remote control 6

Learning 6

4 Notice 7

Disposal of your old product and battery 7

5 Service and support 8

Frequently asked questions 8

Need help? 8

Contents

2EN

1 Your universal

remote

Congratulations on your purchase, and

welcome to Philips! To fully benet from the

support that Philips offers, register your product

at www.philips.com/welcome

Introduction

With the universal remote, you can operate up

to 3 different devices.

Overview of the universal remote

aINPUT: select available source inputs

(antenna, cable, etc.).

: LED indicator

: power on or off.

bDevice selection buttons.

cGUIDE: displays the program guide.

INFO: displays on-screen channel

information.

MENU: menu on or off.

BACK: exit from the menu.

OK: conrm your selection.

/ / / : up/down/left/right.

dVOL+/-: adjust the volume.

CH+/-: go to the next/previous channel.

: mute

LAST: return to the previous tuned

channel.

e: previous track

: stop

: next track

: play

: pause

: rewind

: record

: fast forward

f/ / / : teletext off/teletext mix/

teletext on/teletext hold.

gDigit buttons

I/II : select the audio channel.

-/-- : select between one and two-gure

channel numbers.

3EN

Supported devices

Device name Description

TV/TV-2 TV, DTV

SAT/CBL Cable box, satellite receiver,

IPTV, DVR, HDTV decoder

and TiVo

BD DVD player/recorder, Blu-ray

player

STR Streaming devices, Apple TV,

Roku, Sony,WD TV, Netgear

VCR Video cassette player/recorder

AUX Auxiliary equipment, media

center PC, others

2 Get started

Insert batteries (not included)

Warning

• Check the battery polarity when inserting in the

battery compartment. Incorrect polarity may damage

the product.

Caution

• Risk of explosion! Keep batteries away from heat,

sunshine or re. Never discard batteries in re.

• Risk of decreased battery life! Never mix different

brands or types of batteries.

Note

• When you replace the batteries, all user settings will

be retained in the memory of the universal remote for

5 minutes.

4EN

Set up the universal remote

You must rst set up the universal remote

before operating your devices.

Set up by code selection

1 Switch on your device.

2 Press and hold the device selection button

(e.g.TV) for 5 seconds until the red LED

is on.

3 Look up the 5-digit code for your brand

in the code list. Codes are listed by the

device type and brand name.The most

popular code is listed rst

12345

4 Enter the rst 5-digit code using the digit

buttons.

5 If the light is off, a valid code is saved.

Otherwise, the light will ash six times, and

then remains on for code re-entry.

6 Operate the device with the universal

remote. If your device responds correctly,

it means you have entered the right code.

Otherwise, repeat from Step 2, and enter

the second code on the list.

5EN

Note

• It is possible sometimes that your device only responds

to some of the buttons. In such case, set up with the

next code in the code list, and try operating your

device again. If there spill problem on code or key, you

can try to learn a key by learning faction if the remote

support learning function.

• Each device button can be used to set up any device.

E.g. you may setup aTV using the SAT device button.

• Before you enter any digit in Step 4 , you can press

device buttem to exit from setup mode.

Auto registration

1 Switch on your device.

2 Press and hold the device selection button

(e.g.TV) for 5 seconds until the red LED is on.

3 Point at your device with the universal

remote.Then press and release to

start searching the code for your brand.

A different infrared signal is sent every 2

seconds as the universal remote searches,

indicated by a blue ash.

4 When the device is off, immediately press

and release OK to save the code.The blue

LED indicator will turn off.

max. 20

minutes

5 Operate the device with the universal

remote. If your device responds correctly, it

means you have saved the right code.

Note

• Auto registration can be reversed, by pressing and

releasing once more during the auto registration

process.This is helpful if you missed out the chance to

press OK within 2 seconds. Make sure that the device

is rst powered on again.

• It is possible sometimes that your device only responds

to some of the buttons. In such case, set up with the

next code in the code list, and try operating your

device again.

6EN

3 Use your

universal

remote control

Learning

You must have an original remote for the

Universal Remote Control (URC) to learn code

from it.

Learn commands

1 Press and hold the device selection button

(e.g.TV) for 5 seconds until the red LED

is on.

2 Enter the learning code 99900.The

red LED will ash once and then remain

on.

3 Place the universal remote control and the

remote control of your device on a at

surface, aiming at each other at a distance

of 3 to 5 cm apart.

4 Press and release the desired key on the

universal remote control which you want

the command to be learned.The LED

indicator will ash twice then remains on.

5 Press and hold the target key on the

remote control of your device for a few

seconds.

6 If the LED indicator light ashes once and

then remains on, the command has been

learned successfully.You can release the

key on the remote control of your device.

If the LED indicator light ashes six times

quickly, it means there’s an error in the

learning process. Adjust the position of

both remote controls and repeat from

Step 4 again.

7 Repeat from step 3 to learn other key

functions, or press and hold any key for 3

secouds to terminate the learning mode,

the LED indicator will go out immediately.

Note

• On Step 4, if no key is selected for more than 15

seconds, the LED indicator will ash six times and the

learning mode will exit automatically.

• On Step 5, if no other remote signal is received for

more than 30 seconds, the LED indicator will ash

six times and then remains on.You will need to select

a desired key again for learning as in Step 4 on your

universal remote control.

• Each function key will hold only one command, a new

command to be learned will automatically replace the

previous one.

Clear learned commands

Clear all codes learned for a particular device

1 Press and hold the device selection button

(e.g.TV) for 5 seconds until the red LED

light is on.

2 Enter the learning code 99910.

The red LED light will ash once and then

turns off.

» All codes learned for the device will be

cleared.

Clear all codes learned for the universal

remote control

1 Press and hold the device selection button

(e.g.TV) for 5 seconds until the red LED

light is on.

2 Enter the learning code 99910.The

red LED light will remain on briey, ash

twice and then turns off.

» All codes learned for the universal

remote control will be cleared.

7EN

4 Notice

Disposal of your old product

and battery

Your product is designed and manufactured

with high quality materials and components,

which can be recycled and reused.

This symbol on a product means that the

product is covered by European Directive

2012/19/EU.

This symbol means that the product contains

batteries covered by European Directive

2013/56/EU which cannot be disposed of with

normal household waste.

Inform yourself about the local separate

collection system for electrical and electronic

products and batteries. Follow local rules and

never dispose of the product and batteries

with normal household waste. Correct disposal

of old products and batteries helps prevent

negative consequences for the environment and

human health.

Removing the disposable batteries

To remove the disposable batteries, see section

‘Insert batteries’.

When this logo is attached to a product, it

means a nancial contribution has been paid to

the associated national recovery and recycling

system.

Environmental information

All unnecessary packaging has been omitted.

We have tried to make the packaging easy to

separate into three materials: cardboard (box),

polystyrene foam (buffer) and polyethylene

(bags, protective foam sheet.)

Your system consists of materials which can

be recycled and reused if disassembled by

a specialized company. Please observe the

local regulations regarding the disposal of

packaging materials, exhausted batteries and old

equipment.

You will nd our contact details at the end of

this user manual. For online support, visit

www.philips.com/support

5 Service and

support

Frequently asked questions

My universal remote does not work at all.

• Check if you have correctly setup the

device with the right code. Check if you

have pressed the corresponding device key

for your device.

• Check if the batteries are inserted properly.

If the battery level is low, replace the

batteries.

• Check if your device is powered on.

If several device codes are listed under the

brand of my device, how can I select the

correct device code?

To seek the correct device code, test the codes

one by one.The codes are sorted by popularity,

and the most popular code is listed rst.

My device responds only to some of the

commands.

You have set a code for which only some

commands work properly but some do not.Try

other codes until most keys work properly.

Need help?

We advise you to rst read this user manual

carefully. It helps you set up and use the

universal remote.

If, however, you require extra information or

have additional questions about setup, usage,

warranty, etc of the SRP2018, you can always

When calling our helpline, make sure to have

the SRP2018 at hand when you call, so that our

operators can help you determine whether

SRP2018 is working properly.

Specications are subject to change without notice.

Philips and the Philips Shield Emblem are registered trademarks

of Koninklijke Philips N.V. and are used under license.

This product has been manufactured by and is sold under the

responsibility of MMD Hong Kong Holding Limited or

one of its afliates, and MMD Hong Kong Holding Limited is

the warrantor in relation to this product.

SRP2018_10_UM_V1.0

Inhaltsverzeichnis

Andere Philips Fernbedienung Handbücher

Philips

Philips SBCRP520 Bedienungsanleitung

Philips

Philips US2-P335B Bedienungsanleitung

Philips

Philips DTR230 - Bedienungsanleitung

Philips

Philips SRU5130/53 Bedienungsanleitung

Philips

Philips SRP1003WM/17 Bedienungsanleitung

Philips

Philips SBCRU520/85 Bedienungsanleitung

Philips

Philips SBC RU 930 Bedienungsanleitung

Philips

Philips SRU 740/10 Bedienungsanleitung

Philips

Philips SBCRU220/00 Bedienungsanleitung

Philips

Philips SRP1103/27 Bedienungsanleitung

Philips

Philips SBCRU258/00H Bedienungsanleitung

Philips

Philips SRC2063/27 Bedienungsanleitung

Philips

Philips SBC RU 510 Bedienungsanleitung

Philips

Philips Environ3 61205A Bedienungsanleitung

Philips

Philips SBCRP420/00 Bedienungsanleitung

Philips

Philips US2-PDVR8 Bedienungsanleitung

Philips

Philips SBCRU631/87 Bedienungsanleitung

Philips

Philips City line Bedienungsanleitung

Philips

Philips Perfect replacement SRP2003 Bedienungsanleitung

Philips

Philips SRP 1001 Bedienungsanleitung

Philips

Philips SRP5004/87 Bedienungsanleitung

Philips

Philips SPS1020P/17 Bedienungsanleitung

Philips

Philips TSU500 Bedienungsanleitung

Philips

Philips SRU 520/87 Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung