Philips TSU7000 Bedienungsanleitung

User Guide

Safety & Regulations

FCC Compliancy

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC rule and ICES 003 in Canada. These

limits are designed to provide reasonable protection against harmful interference

in residential installations. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation.

If the equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

■Reorient or relocate the receiving antenna extender.

■Increase the separation between the equipment and receiver.

■Connect the equipment into an outlet on a different circuit from the receiver.

■Consult the dealer or an experienced radio/TV technician for help.

FCC Information for Users

Caution The user changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equipment.

All rights are reserved. Reproduction in whole or in part is prohibited without prior

consent of the copyright owner.

TSU7000_US1004.qxd 19-10-2004 16:09 Pagina 1

User Guide

Table of Contents

Taking a First Look 4

ProntoPro NG: The Home Theater Control Panel 4

The Device 5

The Touch Screen 7

The Docking Station 8

What’s New for ProntoPro Next Generation? 9

Before You Start 10

Installing the Battery Pack 10

Charging the ProntoPro NG 11

Getting Started 13

Turning on ProntoPro NG 13

Setting Time and Date 14

Changing the Time Format 14

Changing the Time 14

Changing the Date 15

Setting the Language 16

Operating ProntoPro NG 17

Device Overview 17

Page Overview 18

Customizing ProntoPro NG 19

Using the Tools 19

Defining the Brand for a Device 20

Learning Commands 23

Labeling Elements 25

Adding Devices 28

Deleting Elements 30

Moving Devices 31

Adjusting the Settings 32

Setting the Brightness of the Backlight 33

Setting the Timeout of the LCD Screen 33

Setting the Volume Level 34

Setting the Navigation for ProntoPro NG 34

Setting the Animation Mode 35

Calibrating the Touch Screen 35

Adjusting the Screen Activation Settings 36

TSU7000_US1004.qxd 19-10-2004 16:09 Pagina 2

User Guide

Table of Contents

Using the Power Features 38

Creating and Editing Macros 38

Creating a Macro 38

Editing a Macro 40

Creating and Editing Timers 51

Activating Timers 41

Creating and Editing Timers 42

Operating ProntoPro NG with the Cursor 48

Operating ProntoPro NG with RF 50

Selecting RF to Operate your Devices 51

Selecting IR to Operate your Devices 52

ProntoProEdit NG 53

FAQ 55

Troubleshooting 57

General Problems 57

Customizing Problems 58

Memory Storage Problems 59

ProntoPro NG error messages 61

Connection to the PC 59

Maintaining ProntoPro NG 60

Important Notices 60

Cleaning ProntoPro NG 60

Upgrading ProntoPro NG 60

List of Symbols 61

Specifications 64

Glossary 65

Index 68

TSU7000_US1004.qxd 19-10-2004 16:09 Pagina 3

User Guide

Taking a First Look

ProntoPro NG:

The Home Theater Control Panel

ProntoPro NG is a Home Theater Control Panel that allows maximum flexibility and

customization for even the most sophisticated home entertainment system. It can

control almost any device that works with infrared (IR) remote control signals.

Its intuitive interface makes it a perfect remote control for every user.

ProntoPro NG is easy to configure. It contains a huge universal database where

IR codes are stored to control different brands for all kinds of video, audio devices

and even home automation equipment. By default ProntoPro NG is set up to

control Philips and Marantz devices. For other brands you simply choose the

brands of your devices when you use ProntoPro NG for the first time.

Furthermore the ProntoPro NG is equipped with a color touch screen. This TFT-

display supports 65536 colors so you can upload any color picture.

ProntoPro NG offers you some extra powerful features:

■You can create and edit macros, allowing you to send a series of commands

with one single touch.

■You can set timers for certain actions to be carried out at predefined times,

e.g. switching on your lights or recording your favorite daily TV-show with

your VCR.

■You can choose to have ProntoPro NG working with radio frequency (RF)

signals to operate devices from a distance or from an adjacent room. To do

this, you need an optional RF Extender that converts ProntoPro NG RF signals

into IR signals.

With ProntoProEdit NG software you can create your own screens and define a

personal look. ProntoProEdit NG’s Online Help system (accessible via the ‘Help’

icon in ProntoProEdit NG) will guide you through the process.

See ‘ProntoProEdit NG’ on page 53 for more information. You can find

ProntoProEdit NG on the included CD-ROM and on the Philips website

www.pronto.philips.com. In the Downloads section of the website you can also

find the latest upgrades for your ProntoPro NG software.

TSU7000_US1004.qxd 19-10-2004 16:09 Pagina 4

User Guide

Taking a First Look

The Device

ProntoPro NG has several hard buttons. Most are freely programmable, some have

a predefined function:

■The buttons on the left side of the ProntoPro NG screen have predefined

functions: Page up, Page down and Backlight.

■The 4 firm keys below the touch screen are freely programmable. You can

reprogram the function of these buttons and change the label on the touch

screen.

■The cursor and the Home button on the right side of the cursor are

programmed to operate devices (e.g. navigating through the on screen menu of

your TV). With the Toggle button you can change the working of the cursor.

The free programmable and the OK button are meant for future purposes.

The buttons on the right side of the screen are used to control the volume and

channel: Channel up, Channel down, Mute, Volume up and Volume down.

Although these buttons each have a predefined function, you can program

them yourself. If you learn one of these buttons or assign a macro to it, its

predefined function will be permanently lost.

Learning eye

LCD touch screen

Firm keys

Free programmable

Toggle button

Cursor

Channel up

Channel down

Mute

Volume up

Volume down

Home

TSU7000_US1004.qxd 19-10-2004 16:09 Pagina 5

User Guide

Taking a First Look

Backlight

Page up

Page down

USB port

Reset button

Connection to docking station

Battery

compartment

TSU7000_US1004.qxd 19-10-2004 16:09 Pagina 6

User Guide

Taking a First Look

Labels for the

firm keys

Device

ProntoPro NG

Icon

Device

Overview

button

Page

Overview

button

Soft

buttons

The Touch Screen

TSU7000_US1004.qxd 19-10-2004 16:09 Pagina 7

User Guide

Taking a First Look

The Docking Station

The docking station is used to charge the ProntoPro NG’s battery pack.

When your ProntoPro NG is placed in the docking station, you can connect

ProntoPro NG to your computer via the USB port of the docking station, instead of

the USB port of the ProntoPro NG.

USB port

Connector for

ProntoPro NG

Adapter Connector

TSU7000_US1004.qxd 19-10-2004 16:09 Pagina 8

User Guide

Taking a First Look

What’s New for ProntoPro Next Generation?

This new ProntoPro NG (TSU7000) offers several new features compared to the

previous model of ProntoPro (TSU6000). The most important ones are:

■Transparency

ProntoPro NG supports transparency in buttons and other objects. This makes

it easier to create complex user interfaces. You can now place buttons with a

transparent background on top of a background image, let transparent buttons

overlap or create transparency effects within buttons.

■65536 colors

The number of colors has increased from 256 to 65536 (64k). Therefore the

buttons look much more natural.

■USB

ProntoPro NG has a USB port to make downloading much easier.

■32 MB of Memory

ProntoPro NG has 32 Megabyte of memory. This enables you to download

larger configuration files to ProntoPro NG.

■Integrated Macros

Macros are now better integrated in the configuration file. Each button can be

a macro, this means each button can contain more than one action.

■More advanced Timers

Your ProntoPro NG is able to set timers for certain actions to be carried out at

any time you choose. Timers are not an entirely new feature of ProntoPro NG,

but they are easier to use and better integrated with the configuration file. You

can activate and deactivate the timers you created and you can also set them

to repeat daily or weekly. For instance, you can have the lights switched on

every day at sunset. You can also create a timer to set your VCR to record your

favorite TV-show on Wednesday and Saturday.

■Page Overview

The Page Overview offers you a list of all the pages for one device. Every

device comes with a Page Overview, making it easier and faster to browse

through the device pages.

■Cursor Navigation

By default the cursor is programmed to operate devices. The functions

assigned to the cursor button depend on the device active on ProntoPro NG.

ProntoPro NG also offers you the possibility to use the cursor for navigating

through devices and pages on the screen. The Left and Right cursor buttons

allow you to scroll through the devices, with the Up and Down cursor buttons

you scroll through the different pages.

■Animation Mode

ProntoPro NG provides navigation feedback through graphical animations of

mode transitions and page transitions. You can enable and disable the

animations of your ProntoPro NG in the Settings Pages.

■Multi Language Support

ProntoPro NG now supports besides English also Spanish, French, German and

Dutch.

TSU7000_US1004.qxd 19-10-2004 16:09 Pagina 9

User Guide

When you use ProntoPro NG for the first time, you will have to:

■install the battery pack;

■place ProntoPro NG in the docking station and charge it.

Attention Use the docking station only with the Philips NiMH rechargeable battery pack.

Never plug other appliances (like mobile phones, PDA’s, …) into the docking

station. This causes damage to the connector and the appliance.

Installing the Battery Pack

1Press the latch on the battery cover with your thumb and then slide the

cover forward firmly.

2 Lift up the battery cover.

Before You Start

3Place the battery pack in the battery

compartment.

TSU7000_US1004.qxd 19-10-2004 16:09 Pagina 10

Andere Handbücher für TSU7000

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Philips Fernbedienung Handbücher

Philips

Philips US2-PM310 Bedienungsanleitung

Philips

Philips SpeechMike LFH3500 Bedienungsanleitung

Philips

Philips SRU 5086 Bedienungsanleitung

Philips

Philips SRP2003/55 Bedienungsanleitung

Philips

Philips US2-PDVD6 Bedienungsanleitung

Philips

Philips SRU4002X/10 Bedienungsanleitung

Philips

Philips SBCRU240/00 Bedienungsanleitung

Philips

Philips PRONTO TSU7500 Bedienungsanleitung

Philips

Philips SRU9600/17 Bedienungsanleitung

Philips

Philips SRU 5120/87 Bedienungsanleitung

Philips

Philips SRP 3004/53 Bedienungsanleitung

Philips

Philips SRP5018 Bedienungsanleitung

Philips

Philips MC-110 Bedienungsanleitung

Philips

Philips Perfect replacement SRC2063WM Bedienungsanleitung

Philips

Philips Home Power SPC1241AT/27 Bedienungsanleitung

Philips

Philips TSU6000 Bedienungsanleitung

Philips

Philips Perfect replacement SRP2003 Bedienungsanleitung

Philips

Philips SBCRU530/87B Bedienungsanleitung

Philips

Philips SRP 3004/10 Bedienungsanleitung

Philips

Philips SBCRU640/00 Bedienungsanleitung

Philips

Philips RP520 Bedienungsanleitung

Philips

Philips SRU2103S/27 Bedienungsanleitung

Philips

Philips SRM 5100 Bedienungsanleitung

Philips

Philips RU125 Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung