Philips 20PF5120/93 Bedienungsanleitung

3138 155 23902

Expanding the base requires a degree of force; please use sufficient force to unfold the base.

When unfolding the base, place the TV on a flat, sturdy surface before expanding the base.

UNFOLD THE BASE

Quick Use and Hookup Guide

CONTENTS IMPORTANT

NOTE: This quick setup guide is used with several

different LCD TV models. Not all features (and drawings)

discussed in this manual will necessarily match those

found with your LCD TV set. This is normal and does not

require that you contact your dealer or request service.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD

DO NOT EXPOSE THIS UNIT TO RAIN OR EXCESSIVE.

INSTALLING LCD TV ON THE WALL . . 1

UNFOLD THE BASE. . . . . . . . . . . . . . . 1

TV CHANNEL INSTALLATION . . . . . . . . 2

PRESENTATION OF THE LCD TV . . . . . 2

ACCESSORIES. . . . . . . . . . . . . . . . . . . . 3

BATTERY INSTALLATION . . . . . . . . . . . . 3

REMOTE CONTROL OPERATION . . . . . . 3

ANTENNA TV . . . . . . . . . . . . . . . . . . 4

BASIC CABLE TV CONNECTION . . . . . 4

UNER MODE CONTROL . . . . . . . . . . . . . 5

AUTO PROGRAM (SETTING UP

CHANNELS) . . . . . . . . . . . . . . . . . . . . 5

CABLE BOX (WITH RF IN/OUTPUTS) . . 6

CABLE BOX (WITH AUDIO/VIDEO

OUTPUTS) . . . . . . . . . . . . . . . . . . . . . 6

S-VIDEO CONNECTIONS . . . . . . . . . . . 7

COMPONENT (HD) CONNECTIONS . . . 7

PC (MONITOR) INPUTS . . . . . . . . . . . 8

INSTALLING LCD TV ON THE WALL

The stand of your LCD TV complies with the VESA standard, if you intend to install the LCD TV on the wall,

please consult a professional technician for proper installing.

Wall Mounting of your LCD TV :

Put your LCD TV set on a safe and ﬂ at surface, then

fold the base backward.

Note: To fold the base requires a degree fo force.

Use for the TV set a Vesa compliant wall mount (not included).

(For 15 inch: 75x75 mm , For 20 inch: 100x100 mm)

Use for installation by a professional technician.

Note: The manufacture accepts no liability, ensure installation is

done by a professional technician.

EnglishSimplified

Chinese

Arabic

DC IN

16V

DVI-I IN AUDIO IN

DVI (HDCP / PC ANALOG)

Y Pb Pr L R

COMPONENT HD/SD

COMPONENT VIDEO

AUDIO IN

VIDEO

AUDIO

AV / S-VIDEO

S-VIDEO

PRESENTATION OF THE LCD TV

Television Keys

• VOLUME + / - : To adjust sound level.

• CHANNEL + / - : To select programs.

• MENU : To access or close onscreen menu.

Power button, LED light and infrared sensor

• : To switch the TV on or off.

• Aim remote control at infrared sensors to activate

TV controls.

Rear connectors

Remove the cable cover to access the connectors at

the rear of the LCD TV.

Bottom connectors

Located at the bottom of the set.

V o l u m e

- C h a n n e l +

M e n u

TV CHANNEL INSTALLATION

AU TO S TO RE

PL EA SE W AI T

PR OG .F OU ND 0

IN ST AL L

LA NG UA GE

ST AR T?

MA IN C ON TR OL S

PI CT UR E

AU DI O

FE AT UR ES

IN ST AL L

AU TO P RO GR AM

FREQUENCY MHZ

MANUA L ST ORE

CHANN EL S ETTING

LANGU AG E

AUTO PR OG RAM

FACTO RY R ESET

MANUA L ST ORE

CHANN EL S ETTING

FACTO RY R ESET

Please follow these steps to install TV channels:

Select a TV source via AV+ button on your remote control.

Press the CURSOR RIGHT button to conﬁ rm.

Press MENU button on your remote control to open the onscreen menu.

Press CURSOR DOWN to move to INSTALL, press CURSOR RIGHT on your

remote control to enter INSTALL.

Press CURSOR DOWN to move to AUTO PROGRAM.

Press CURSOR RIGHT to start auto install the TV Channels.

For more detailed explanation of AUTO PROGRAM, please refer to

AUTO PROGRAM section on page 5.

Immediately after unpacking and plugging in your new television, run the auto program function

to set up the TV for the broadcast or cable channels available in your area. If you do not run the

auto program function to set up the channels , your television may not operate properly.

Quick Use and Hookup Guide

BATTERY INSTALLATION

Remove the battery compartment lid on

the bottom of the remote control.

Place lithium cell in the remote control.

Be sure the (+) and (-) ends of the

batteries line up as marked inside the

battery (CR2025) compartment.

Reattach the battery

compartment lid.

REMOTE CONTROL OPERATION

ACCESSORIES

When you unpack this unit, make sure it includes the

following:

Owner`s Manual & Quick Use and Hookup Guide Tuner L-Adapter Warranty Card

Power adapter & cable

Guarantee Card

保修卡

電源适配器和連接線遙控器和電池用戶手冊和連線指南調諧用 L-适配器保修卡

連線指南

用

戶

手

冊

Sleep button

Press to set the LCD TV to turn itself off within a

certain time.

AV button

Press to select the video input source: PC, DVI, TV,

AV, S-Video, HD.

Unused key

Menu button

Press to activate onscreen menu, back to previous

level inside the onscreen menu, or press to exit the

onscreen menu.

Picture Format button

Press the FORMAT button

repeatedly to toggle among the three screen format

sizes; 4:3, EXPAND 4:3, COMPRESS 16:9.

Cursor Buttons

(Left, Right, Up, Down)-

Press these buttons to highlight, select, and adjust

items on the TV’s on screen menu.

Volume button

Press to increase or decrease the sound level.

Number buttons

Press the number buttons for direct access to the

TV channels. For a 2 digit channel, enter the 2nd

digit after enter 1st digit.

Information Button-

Press to see the current channel number on the TV

screen.

Power button

Press to turn the LCD TV on or off.

I-II button / Sound mode

Press repeatedly to select Mono,

Stereo, Dual I, Dual II, Nicam Mono, Nicam Stereo,

Nicam Dual I, Nicam Dual II.

Incredible Surround button-

Adds greater depth and dimension to TV sound.

Select from Incredible Surround or OFF.

Unused key

Mute button

Press to eliminate or restore the LCD TV sound. Mute

will appear on the screen when the sound is muted.

Channel button

Press to adjust the channel up or down.

Smart Sound button

Press repeatedly to select among the 4 settings;

Personal, Voice, Music, or Theatre.

Smart Picture button

Press repeatedly to select either

Personal, Rich, Natural, Soft, or

Multimedia picture setting.

P P button

Press to go to previously selected channel.

ANTENNA TV

A combination antenna receives normal broadcast channels (VHF 2–13 and UHF 14–69). Your connection is easy because there is only

one 75 Ω (ohm) antenna jack on the side of your TV, and that’s where the antenna goes.

If your antenna has a round cable (75 ohm) on the end, then

you’re ready to connect it to the LCD TV. If your antenna

has ﬂ at, twin-lead wire (300 ohm), you ﬁ rst need to attach

the antenna wires to the screws on a 300- to 75-ohm

adapter(not supplied).

Connect the antenna (or adapter) to one end of the

supplied L-Adapter as shown, and connect the other end of

the L-Adapter to the TV jack on the side of the LCD TV.

Plug the DC adapter into the DC IN 16V jack on the LCD

TV. Plug the power cable into an outlet and switch TV set on.

Run the AUTO PROGRAM function to set up the TV for the

broadcast or cable channels available in your area. If you do

not run the auto program function to set up the channels ,

your television may not operate properly.

Antenna

with 75 Ω

cable

Television

Outdoor or Indoor Antenna

(Combination VHF/UHF)

Twin-lead

wire to

300-75Ω

adapter

DC Adapter

Power

Cable

DC IN

16V

DVI-I IN AUDIO IN

DVI (HDCP / PC ANALOG)

Your Cable TV input into your home may be a single (75 ohm) cable or use a cable box decoder. In either case the connection is very

simple. Follow the steps below to connect your cable signal to your new television.

Direct cable connections:

Connect the Cable TV signal to one end of the supplied

L-Adapter as shown, and connect the other end of the

adapter to the TV jack on the LCD TV.

Plug the DC adapter into the DC IN 16V jack on the LCD

TV. Plug the power cable into an outlet and switch TV set on.

Run the AUTO PROGRAM function to set up the TV for the

broadcast or cable channels available in your area. If you do

not run the auto program function to set up the channels ,

your television may not operate properly.

BASIC CABLE TV CONNECTION

The Cable TV signal from

Cable Company

(75 coaxial cable)

Ω

L Adapter

wPo er Cable

DC IN

16V

DVI-I IN AUDIO IN

DVI (HDCP / PC ANALOG)

• Remember, an antenna or cable TV signal must ﬁ rst be connected to

your LCD TV.

• Please make sure that you have selected the TV mode with AV+ key

on your remote control, before installing TV channels.

HELPFUL HINT

• Remember, an antenna or cable TV signal must ﬁ rst be connected to

your LCD TV.

• Please make sure that you have selected the TV mode with AV+ key

on your remote control, before installing TV channels.

HELPFUL HINT

Your LCD TV can automatically set itself for local area (or cable TV) channels. This makes it easy for you to select only the TV stations in

your area by pressing the P+ or P- button.

AUTO PROGRAM (SETTING UP CHANNELS)

Press the MENU button on the remote control to show the

onscreen menu.

Press the CURSOR DOWN button to

highlight the INSTALL menu.

Press the CURSOR RIGHT button

to enter the INSTALL menu.

Press the CURSOR DOWN button to

highlight the AUTO PROGRAM control.

Press the CURSOR RIGHT button to start the AUTO PROGRAM scanning

of channels.

Press the MENU button repeatedly to clear the menu from the screen, after

AUTO STORE has ﬁnished.

AUT O ST O RE

PLE AS E W AI T

PRO G. F OU ND 0

INS TA L L

LAN GU A GE

STA RT ?

MAI N CO NTR OL S

PIC TU RE

AUD IO

FEA TU RES

INS TA LL











AUT O PR OGR AM

FREQUENCY MHZ

MANUAL STORE

CHANNEL SETTING

LANGUAGE

AUTO PROGRAM

FACTORY RESET

MANUAL STORE

CHANNEL SETTING

FACTORY RESET

• Immediately after unpacking and plugging in your new television, run the auto

program function to set up the TV for the broadcast or cable channels available in

your area. If you do not run the auto program function to set up the channels ,

your television may not operate properly.

• After you’ve run Auto Program, check out the results. Press the P(+) or the P(-)

button and see which channels you can select.

• Remember, an antenna or cable TV signal must ﬁrst be connected to your LCD TV.

HELPFUL HINT

You can also choose to tune your TV channels. Manual tuning allows you to store each programme manually.

MANUAL STORE OF TV CHANNEL

Press the MENU button on the remote

control to show the onscreen menu.

Press the CURSOR DOWN button to

highlight the INSTALL menu, then press

CURSOR RIGHT to enter.

Select the MANUAL STORE, then press the CURSOR RIGHT button to

activate auto search channel frequence or press

number button to show your desired

channel frequence.

After the channel frequence conﬁrmed, select

PROGRAM NO. by pressing CURSOR DOWN.

Press the number button or CURSOR RIGHT/LEFT to give the channel

number.

If the channel reception is not satisfactory, press CURSOR DOWN button

to highlight the FINETUNE. then press CURSOR RIGHT/LEFT to adjust.

Note: If the channel reception is satisfactory, please go to step 7.

Press CURSOR DOWN to highlight STORE function. Press CURSOR

RIGHT to conﬁrm stored.

Press the MENU button repeatedly to clear the menu from the screen.

MAIN CONTROLS

PICTURE

AUDIO

FEATURES

INSTALL

LANGUAGE

AUTO PROGRAM

MANUAL STORE

FACTORY RESET

CHANNEL SETTING

MANUAL STORE

PROG NO.

FINETUNE

STORE

XXX.XX MHZ

START ?

MANUAL STORE

PROG NO.

FINETUNE

STORE

MANUAL STORE

PROG NO.

FINETUNE

STORE

6 0

MANUAL STORE

PROG NO.

FINETUNE

STORE

STORE ?

INSTALL

LANGUAGE

AUTO PROGRAM

MANUAL STORE

FACTORY RESET

PROG NO.

FINETUNE

STORE

CHANNEL SETTING

CABLE BOX (WITH RF IN / OUTPUTS):

Connect the Cable TV signal to the IN jack (or RF IN or CABLE

IN) on the Cable Box.

Connect an RF coaxial cable (not supplied) to the OUT jack (or

TO TV or RF OUT) of the Cable Box.

Connect the other end of the coaxial cable to one end of the

supplied L-Adapter as shown, and connect the other end of the

adapter to the TV jack on the LCD TV.

Plug the DC adapter into the DC IN 16V jack on the LCD TV.

Plug the power cable into an outlet and switch TV set on.

Set the Channel 3/4 (or Output channel) switch of the Cable Box

to 3 or 4. Set the TV to the same channel. When watching TV

programming, change channels at the Cable Box, not the LCD TV.

CABLE BOX (WITH AUDIO / VIDEO OUTPUTS):

This connection will supply stereo sound to the LCD TV.

Connect the Cable TV signal to the IN jack (or RF IN or CABLE

IN) on the Cable Box.

Using an RCA-type video cable (not supplied) connect one end of

the video cable to the Video Out jack of the Cable Box. Connect

the other end of the cable to the yellow VIDEO jack on the side

of the TV. Video cables are usually marked with yellow and are

available from Philips or electronics retailers. Video jacks on most

equipment are yellow.

Using RCA-type, stereo audio cables (not supplied), connect one

end of the cables to the left and right Audio Out jacks of the Cable

Box. Connect the other end of that cable to the Audio jack on the

side of the LCD TV. Audio cables are usually marked with red and

white and are available from Philips or electronics retailers. The

right audio jack is red and the left audio jack is white. Match the

cable colors to the jack colors.

Plug the DC adapter into the DC IN 16V jack on the LCD TV.

Plug the power cable into an outlet and switch TV set on.

Note: Use the AV+ button on the remote control to tune to the AV

channel for the cable box signal. Once tuned, change channels at

the cable box, not the television.

When you watch programs using VCR, it’s recommended to select

SOFT Mode via Smart picture.

TO TV

CABLE

OUTPUT

3 4

The Cable TV signal from

the Cable Company

Coaxial

Cable

Ω

DC Adapter

Power

Cable

DC IN

16V

DVI-I IN AUDIO IN

DVI (HDCP / PC ANALOG)

CABLE

VIDEO

OUT

AUDIO

OUT

3 4

OUTPUT

Cable Box

Cable

TV signal Video Cable

Audio Cable

DC Adapter

Power

Cable

VIDEO

AUDIO

AV / S-VIDEO

S-VIDEO

DC IN

16V

DVI-I IN AUDIO IN

DVI (HDCP / PC ANALOG)

L-Adapter

• Immediately after unpacking and plugging in your new television,

run the auto program function to set up the TV for the broadcast

or cable channels available in your area. If you do not run the auto

program function to set up the channels , your television may not

operate properly.

• Please make sure that you have selected the TV mode with AV+ key

on your remote control, before installing TV channels.

HELPFUL HINT

S-VIDEO

OUT

ACCESSORY DEVICE

EQUIPPED WITH COMPONENT

VIDEO OUTPUTS.

OUT OUT

VIDEO AUDIO COMPVIDEO

DC IN

16V

DVI-I IN AUDIO IN

DVI (HDCP / PC ANALOG)

Y Pb Pr L R

COMPONENT HD/SD

COMPONENT VIDEO

AUDIO IN

Power Cable

Audio Cable

COMPONENT

VIDEO CABLES

(Green, Blue, Red)

Component Video input provide the highest possible color and

picture resolution in the playback of digital signal source material,

such as with DVD players. If you are using a HD (High Deﬁ nition)

receiver that can transmit high deﬁ nition programming, the TV can

accept those signals through the Component input located on the

bottom of the TV.

Connect the component (Y, Pb, Pr) Video OUT jacks from the

DVD player (or similar device) to the COMP(onent) VIDEO Input

jacks on the bottom of the LCD TV.

Connect the red and white AUDIO CABLES to the Audio (left

ad right) output jacks on the rear of the accessory device to the

AUDIO IN jack. Connect the other end of the cable to the Audio

jack on the rear of LCD TV.

Plug the DC Adapter into the DC IN 16 V jack on the LCD TV.

Plug the power cable into an outlet. Turn on the LCD TV and other

equipment.

Press the AV button on the remote control to select HD. HD will

appear in the upper left corner on the TV screen.

Insert a DVD disc into the DVD player and press the PLAY button

on the DVD Player.

The S-Video connection on the rear of the LCD TV can provide you

with better picture detail and clarity for the playback of accessory

sources such as DBS (digital broadcast satellite), DVD (digital video

discs), video games, and VHS VCR (video cassette recorder) tapes

than the normal antenna picture connections.

Connect an S-Video cable to the S-VIDEO jack of the other

equipment (DVD Player, Camcorder, etc.) and to the S-VIDEO jack

on the rear of the LCD TV.

Connect RCA-style audio cables (usually red and white) to the

AUDIO OUT (left and right) jacks on the other equipment.

Connect the other end of the cables to the AUDIO jack on the

side of the LCD TV.

Plug the DC Adapter into the DC IN 16V jack on the LCD TV.

Plug the power cable into an outlet. Turn on the LCD TV and other

equipment.

Press the AV buttons to set the LCD TV to its S-VIDEO mode.

Press PLAY on the other equipment to view its material on the

LCD TV.

Note:

• The Philips LCD TV remote control can not be used to operate other video/audio

equipment.

• The Audio jack of AV IN is shared between Video (CVBS) and S-Video signals. If Audio

and Video is connected to S-Video input, you can still hear sound if you select Video via

AV select, even there appears no image on screen.

S-VIDEO CONNECTIONS

COMPONENT (HD) CONNECTIONS

ANT E NN A

OU T

ANT E NN A

VID E O

AUD IO

OU TOU T

S -V H S O UT

S-Video

Cable

Audio Cable

Power Cable

VCR or External

Accessory Device

(with S-Video Output)

3VIDEO

AUDIO

AV / S-VIDEO

S-VIDEO

DC IN

16V

DVI-I IN AUDIO IN

DVI (HDCP / PC ANALOG)

Note:

• The Philips LCD TV remote control can not be used to operate

Beliebte Fernseher Handbücher anderer Marken

Toshiba

Toshiba 27A10 Bedienungsanleitung

Hitachi

Hitachi 32FX48B Bedienungsanleitung

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Bedienungsanleitung

Changhong Electric

Changhong Electric uhd55b6000is Bedienungsanleitung

Panasonic

Panasonic Genus TX-G10 Bedienungsanleitung

Toshiba

Toshiba 19A20 Bedienungsanleitung

Sony

Sony XBR-100Z9D Bedienungsanleitung

Samsung

Samsung 55S9 B Series Bedienungsanleitung

Sharp

Sharp LC-40FI5012E Bedienungsanleitung

Loewe

Loewe Table Stand Reference 55 Bedienungsanleitung

Sylvania

Sylvania 6427FB Bedienungsanleitung

Sanyo

Sanyo CE19LD90N-B Bedienungsanleitung

North State

North State TV2GO Bedienungsanleitung

RCA

RCA RTU7877 Bedienungsanleitung

Sharp

Sharp 21K-FG1RU Bedienungsanleitung

Sony

Sony Esprit TAV-L1 Bedienungsanleitung

Grundig

Grundig 43 VLE 4820 Bedienungsanleitung

Samsung

Samsung LN26C350D1D Bedienungsanleitung