Physio Logic 106-975 Bedienungsanleitung

Automatic Wrist

Blood Pressure Monitor

with Smart Valve Technology

Instruction Manual

106-975

Features:

• Smart Valve Technology

• Memory for up to 90 Readings

• 3-Reading Averaging

• Time and Date Display

• One-Touch Operation

• Easy-to-read Display

• Auto Shut-Off

• BP Manager Software

• USB Data Transfer to PC

Table of Contents

Smart valve measuring technology. . . . . . . . . . . . . . . . . . . . . . . 3

Statementofaccuracy.................................3

Aboutbloodpressure .................................3

Bloodpressurestandard...............................4

Bloodpressurefluctuation .............................4

Beforetakingameasurement...........................5

Name/functionofeachpart............................6

Installingbatteries....................................7

Carryingcase .......................................7

Displayexplanation ..................................8

Recallingmemory....................................9

Clearvaluesfrommemory.............................9

Timeadjustment....................................10

Applyingthearmcuff................................11

Correctmeasuringposture ............................11

Takingameasurement ...............................12

Troubleshooting ....................................13

Cautionarynotes....................................13

Datatransfertopc...................................14

Bloodpressurechart.................................14

Specifications......................................15

Smart Valve Measuring Technology

The Physio Logic Smart Valve Wrist blood pressure monitor uses

the oscillometric method to detect your blood pressure. Before the

cuff starts inflating, the device will establish a baseline cuff

pressure, which is equivalent to the air pressure. The measurement

of your blood pressure is based on this baseline pressure. During

the deflation of the wrist cuff, the monitor is detecting the pressure

oscillations generated by the beat-to-beat pulsatile.After detecting

the amplitude and the slope of the pressure oscillations during the

deflation process, the monitor will determine the systolic and

diastolic pressures for you, while your pulse rate is detected at the

same time.

Statement of Accuracy

Blood pressure measurements determined with Physio Logic are

equivalent to those obtained by a trained observer using cuff /

stethoscope auscultation method, within the limits prescribed by

the American National Standard for Electronic or Automated

Sphygmomanometers (ANSI /AAMI).

About Blood Pressure

Blood pressure is the pressure exerted on the arterial wall while blood

flows through the arteries. The pressure measured when the heart

contracts and sends blood out of the heart is systolic (highest). The

pressure measured when the heart dilates with blood flowing back

into the heart is called diastolic (lowest) blood pressure.

High blood pressure’s strong correlation with cardiovascular

diseases and high morbidity has made measuring blood pressure a

necessity of identifying those at risk.

Blood Pressure Standard

The World Health Organization (WHO) and the National High

Blood Pressure Education Program Coordinating Committee

have developed a blood pressure standard, in which areas of low

and high risk blood pressure are identified. This standard is a

guideline as blood pressure varies among different people and

different age groups.

It is important that you consult with your physician regularly.

Your physician will tell you your normal blood pressure range as

well as the point at which you will be considered at risk.

Category Systolic (mmHg) Diastolic (mmHg)

Stage 2 Hypertension ³160 or ³ 100

Stage 1 Hypertension 140-159 or 90-99

Prehypertension 120-139 or 80-89

Normal < 120 and < 80

Blood Pressure for Adults Age 18 and Older

Blood Pressure Fluctuation

Blood pressure fluctuates all the time! You should not be overly

worried if you encounter two or three measurements at high levels.

Blood pressure changes over the month and throughout the day. It

is also influenced by season and temperature.

(Case:

Male, 35 years old)

Wake

Arrive

office

Leave

office

Dinner

/ Sleep

Telephone

Discussion

Argument

in a meeting

18:00 Midnight

12:00

6:00

100

150 mmHg Systolic

Diastolic

Before Taking a Measurement

To help you obtain more accurate readings:

• Urinate if necessary.

• Remove any clothing and jewellery from your left arm. Placing

the cuff on anything other than bare skin can result in an

inaccurate reading.

• Sit in a comfortable position with your legs and ankles uncrossed

and your back supported.

• Sit quietly for 15 minutes before measuring your blood pressure.

• If you need to retake a reading, wait at least 5 minutes to allow

your circulation to return to normal.

• Pick a time of day, and take your blood pressure at about the same

time every day. Since your blood pressure varies at different times

of the day, this will make it easier for you to compare your daily

blood pressure readings. A good time to take your blood pressure

is in the morning, before breakfast.

• Don't smoke, eat or exercise for 30 minutes before taking your

blood pressure. These activities can change your blood pressure.

• Do not measure your blood pressure immediately after

consuming a large meal. To obtain more accurate readings,

please wait one hour before measuring.

• Only take your blood pressure in a quiet place and when you are

relaxed. Don't take your blood pressure when you are under

stress.Any stress will raise your blood pressure.

• Position your arm so that the cuff is at the level of your heart.

• If the monitor is stored at very low temperature (near freezing),

place it in a warm location for at least one hour before using it.

Name / Function of Each Part

2 “AAA” size,

1.5 V Alkaline batteries

LCD display

Battery

cover

Memory

Recall key

Date/Time

Set key

Start/Stop key

Wrist Cuff

Installing Batteries

Carrying Case

Please store your blood pressure monitor in the carrying case

as shown below.

1. Place your thumb on the side of the battery

cover. Pull the battery cover in the direction

of the cuff to open.

2. Install lower battery first in the bottom

position with the battery ribbon underneath.

Ensure correct polarity. Battery Type: 2

Alkaline LR03 (AAA) size. Place in the other

battery and pull up the battery ribbon over it.

3. Replace the cover by placing the end tabs

of the battery cover in the slots on the top

of the battery compartment. Click in the

other end to secure the battery cover.

Replace batteries when:

1. Low battery icon appears on display.

2. Nothing appears in the display when the

power is switched on.

Note: Remove batteries when unit is not in use for extended

periods of time. Batteries are hazardous waste. Do not

dispose them together with the household garbage.

Display Explanation

Systolic pressure

Diastolic pressure

Date / Time indicator

Pulse rate

No. of memory

sequence

Shows the number of stored measurements.

Pulse Mark: Shows the pulse rate per minute.

Appears when batteries should be replaced.

Measurement Error (user’s pressure exceeding 250

mmHg or lower than 40 mmHg): Measure again quietly.

Keep wrist and arm steady during measurement.

If error keeps occurring, see page 13 - Troubleshooting.

Air Circuit Abnormality: Measure again.

Pressure Exceeding 300 mmHg: Measure again.

Data Error: Remove and reload the batteries.

Clear Values from Memory

1. To read memory values, press the "M" key.

The memory values will be shown on the

LCD display. The average measurement

will be shown first and a new press of the

“M” key will show the last measurement.

2. Every new press of the “M” key calls for one

prior value stored.

1. Press and hold the “M” key for approximately 5 seconds to clear

the data. The data may be lost if the batteries are removed. Users

should record the data on a blood pressure recording chart or in

the BPManager before removing the batteries.

Recalling Memory

Time Adjustment

1. To adjust the date / time in the monitor, press the Set key .

The display will show a blinking number showing the month.

2. Change the month by pressing the “ ” Key. Each press will

increase the number by one in a cycling manner. Press the Set

Key again to confirm the entry, and the screen will show a

blinking number representing the date.

3. Change the date, the hour, and the minute as described in Step 2

above, using the “ ” Key to change and the Set Key to

confirm the entries.

4. A “0” will reappear as the Blood Pressure Monitor is ready for

measurement again.

Press the

blinking month

increasing month

confirm the entry

Set key

Inhaltsverzeichnis

Andere Physio Logic Blutdruckmessgerät Handbücher

Physio Logic

Physio Logic Essentia+ Bedienungsanleitung

Physio Logic

Physio Logic 106-920 Bedienungsanleitung

Physio Logic

Physio Logic Lumina 106-934 Bedienungsanleitung

Physio Logic

Physio Logic Manual InflateBlood Pressure Monitor Bedienungsanleitung

Physio Logic

Physio Logic 106-965 Bedienungsanleitung

Physio Logic

Physio Logic Smart Inflate Bedienungsanleitung

Physio Logic

Physio Logic SIGNA 106-937 Bedienungsanleitung

Physio Logic

Physio Logic Smart Inflate Bedienungsanleitung

Physio Logic

Physio Logic Prisma 106-950 Bedienungsanleitung

Physio Logic

Physio Logic 106-964 Bedienungsanleitung

Physio Logic

Physio Logic LUMINA Bedienungsanleitung

Physio Logic

Physio Logic Physio logic Bedienungsanleitung

Physio Logic

Physio Logic ESSENTIA 106-930 Bedienungsanleitung

Beliebte Blutdruckmessgerät Handbücher anderer Marken

Little Doctor

Little Doctor LD7 Bedienungsanleitung

Microlife

Microlife WatchBP Office Targe Bedienungsanleitung

Omron

Omron M6W Handbuch

Mx Onda

Mx Onda MX-CP2395 Bedienungsanleitung

Braun

Braun VitalScan 1 Bedienungsanleitung

Little Doctor

Little Doctor LD-91 Bedienungsanleitung

Sanitas

Sanitas SBM 09 Bedienungsanleitung

A&D

A&D LifeSource UB-328 Bedienungsanleitung

König Electronic

König Electronic HC-BLDPRESS200 Bedienerhandbuch

Leicke

Leicke Sharon Bedienungsanleitung

Omron

Omron M6 Comfort Bedienungsanleitung

3B SCIENTIFIC

3B SCIENTIFIC U11395 Bedienungsanleitung

Soehnle

Soehnle SYSTO MONITOR 100 Bedienungsanleitung

Nasco Healthcare

Nasco Healthcare Simulaids Life/form LF01095U Referenzhandbuch

Microlife

Microlife WatchBP office Bedienungsanleitung

HoMedics

HoMedics MiBody 360 Bedienungsanleitung

ForaCare

ForaCare FORA P30 Plus Bedienungsanleitung

JOYTECH

JOYTECH DBP-6296B Bedienungsanleitung