Physio Logic Smart Inflate Bedienungsanleitung

Features:

• Smart Inflate™ Technology

• Auto memory for up to 60 readings

• One-Touch Operation

• Pre-Programmed Alert Feature

• Easy-to-read Display

• Time and Date Display

Smart Inflate™

Blood Pressure Monitor

Instruction Manual

106-940

Table of Contents

Smart Inflate™ measuring technology ....................3

About blood pressure .................................3

Blood pressure standard ...............................4

Blood pressure fluctuation .............................4

Before taking a measurement ...........................5

Installing batteries....................................7

Recalling memory....................................8

Time adjustment .....................................8

Statement of accuracy .................................3

Name / function of each part............................6

Display explanation ..................................7

Applying the arm cuff.................................9

Taking a measurement ...............................10

Troubleshooting ....................................11

Cautionary notes ....................................11

Specifications ......................................12

Smart Inflate™ Measuring Technology

Statement of Accuracy

This Physio Logic™ monitor uses trend-setting Smart Inflate™

Technology to detect your blood pressure. With one touch of a

button, it will automatically start to inflate and determine your

blood pressure by analysing your pressure oscillations while

inflating. When the measurement is completed, the device will

deflate the cuff and display your systolic, diastolic,

and pulse. Measurement time is significantly shortened and user

comfort is greatly enhanced.

automatically

Blood pressure measurements determined with Physio Logic™

are equivalent to those obtained by a trained observer using cuff /

stethoscope auscultation method, within the limits prescribed by

the American National Standard for Electronic or Automated

Sphygmomanometers (ANSI /AAMI).

Blood pressure is the pressure exerted on the arterial wall while

blood flows through the arteries. The pressure measured when the

heart contracts and sends blood out of the heart is systolic

(highest). The pressure measured when the heart dilates with blood

flowing back into the heart is called diastolic (lowest) blood

pressure.

High blood pressure’s strong correlation with cardiovascular

diseases and high morbidity has made measuring blood pressure a

necessity of identifying those at risk.

About Blood Pressure

Blood Pressure Standard

The Joint National Committee on prevention, detection, evalua-

tion, and treatment of high blood pressure has developed a blood

pressure standard, according to which areas of low and high risk

blood pressure are identified. This standard is a guideline as blood

pressure varies among different people and different age groups...

It is important that you consult with your physician regularly.

Your physician will tell you your normal blood pressure range as

well as the point at which you will be considered at risk.

Optimal <120 and <80

Normal <130 and <85

High-normal 130-139 or 85-89

Hypertension Stage 1 140-159 or 90-99

Hypertension Stage 2 160-179 or 100-109

Hypertension Stage 3 >180 or >110

Category Systolic (mm Hg) Diastolic (mm Hg)

Blood Pressure for Adults Age 18 and Older

Blood Pressure Fluctuation

Blood pressure fluctuates all the time! You should not be overly

worried if you encounter two or three measurements at high levels.

Blood pressure changes over the month and throughout the day.

(Case:

Male, 35 years old)

Wake

Arrive

office

Leave

office

Dinner

/ Sleep

Telephone

Discussion

Argument

in a meeting

18:00 Midnight

12:00

6:00

100

150 mmHg Systolic

Diastolic

Before Taking a Measurement

To help you obtain more accurate readings:

• Urinate if necessary.

• Remove any clothing and jewellery from your left arm. Placing

the cuff on anything other than bare skin can result in an

inaccurate reading.

• Sit in a comfortable position with your legs and ankles

uncrossed and your back supported.

• Sit quietly for 15 minutes before measuring your blood pressure.

• If you need to retake a reading, wait at least 5 minutes to allow

your circulation to return to normal.

• Pick a time of day, and take your blood pressure at about the

same time every day. Since your blood pressure varies at

different times of the day, this will make it easier for you to

compare your daily blood pressure readings.A good time to take

your blood pressure is in the morning, before breakfast.

• Don't smoke, eat or exercise for 30 minutes before taking your

blood pressure. These activities can change your blood pressure.

• Do not measure your blood pressure immediately after

consuming a large meal. To obtain more accurate readings,

please wait one hour before measuring.

• Only take your blood pressure in a quiet place and when you are

relaxed. Don't take your blood pressure when you are under

stress.Any stress will raise your blood pressure.

• Position your arm so that the cuff is at the level of your heart.

• If the monitor is stored at very low temperature (near freezing),

place it in a warm location for at least one hour before using it.

Date / Time - Set button

On/Off/Start

button

Memory recall

button

LCD display

Battery

compartment

Name / Function of Each Part

Arm cuff

Air tube and

connector

INDEX

22~32 cm

8.7~12.6 inch

2~3cm

0.8~1.2 inch

INDEX

Display Explanation

Date and time

Systolic pressure

Diastolic pressure

Pulse rate

Appears when

measurement value is

stored in memory or is

recalled from memory.

Appears when blood

pressure reading is higher

than 160 mmHg (sys.) or

95 mmHg (dia.)

Appears when batteries

should be replaced.

Occurs when a error was made during measurement.

Shows the pulse rate per

minute.

Installing Batteries

1. Press down and lift the battery cover in the direction of the arrow

to open the battery compartment.

2. Install 4 “AA” 1.5 V Alkaline batteries according to the

indication inside the compartment.

3. Replace the battery cover by inserting the bottom tabs first, then

push in the top end of the battery cover.

Replace batteries when:

1. Low battery icon appears on display.

2. The On / Off / Start button is

pushed and nothing appears

on display.

Recalling Memory

1. To recall stored blood pressure readings from memory, simply

press the Memory button. The last set of memorized readings

will be displayed.

2. Another press of the Memory button will recall the previous set

of readings.

Time Adjustment

1. Press and hold the ( ) button for

more than 3 seconds to enter Time

Adjustment Mode. The display

will show a blinking Month.

2. Press the “ ” or “ ” to change the

Month.

3. Press the ( ) button again to

confirm the entry.

4. The display will then show a

blinking Date, followed by Hour

and Minutes. Repeat steps 2 and 3

to adjust the date/time setting.

+–

Hold for

more than

3 seconds

Blinking

month

Changing

month

Confirm

the

entry

Applying the Arm Cuff

1. Insert the cuff’s connecting tube into the unit.

2. Unwrap the arm cuff, leaving the “Index” end of the cuff through

the D-ring of the cuff.

3. Put your left arm through the cuff loop. Position the artery mark

( ) at the middle of your arm above the elbow, in line with your

middle finger. Tighten the cuff by pulling the “Index” end of the

cuff (snug, not tight).

4. Turn your left palm upward

and place the edge of the arm

cuff at approximately 2 to 3

cm above the

inner side of the elbow joint.

5. If the Index line falls within

the OK range, indicated at the

edge of the cuff, this cuff is

suitable for your use. If the

Index line falls out of the OK

range, you may need a

different size cuff.

(0.8” - 1.2”)

INDEX

2 3 cm / 0,8” 1,2”

Taking a Measurement

1. Press the On / Off / Start button. All displays will appear for

approximately one second before returning to “0”.

2. The unit will automatically start to inflate and begin to measure

your blood pressure. During inflation, a changing measure of the

cuff pressure will be shown on the display.

3. When pressure reaches your systolic blood

pressure, the monitor will deflate the cuff

automatically. When the monitor

completes the measurement, it will display

and save your systolic, diastolic, and pulse

readings to memory. Up to 60 memories

can be saved.

This monitor has a built-in alert feature. If

your blood pressure reading is higher than

160 mmHg (SYS) or 95 mmHg (DIA), an

alert icon will show on the display. This

reminds you that your measurement fell

outside of the high blood pressure limits. If

this should persist, it is recommended to see

your physician.

4. Measurement is now completed. Press the On / Off / Start button

to turn the unit off. If no button is pressed, the unit will shut off

automatically in 1 minute.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Physio Logic Blutdruckmessgerät Handbücher

Physio Logic

Physio Logic 106-965 Bedienungsanleitung

Physio Logic

Physio Logic Smart Inflate Bedienungsanleitung

Physio Logic

Physio Logic LUMINA Bedienungsanleitung

Physio Logic

Physio Logic ESSENTIA 106-930 Bedienungsanleitung

Physio Logic

Physio Logic 106-920 Bedienungsanleitung

Physio Logic

Physio Logic 106-964 Bedienungsanleitung

Physio Logic

Physio Logic 106-975 Bedienungsanleitung

Physio Logic

Physio Logic Manual InflateBlood Pressure Monitor Bedienungsanleitung

Physio Logic

Physio Logic Lumina 106-934 Bedienungsanleitung

Physio Logic

Physio Logic Prisma 106-950 Bedienungsanleitung

Physio Logic

Physio Logic Essentia+ Bedienungsanleitung

Physio Logic

Physio Logic Physio logic Bedienungsanleitung

Physio Logic

Physio Logic SIGNA 106-937 Bedienungsanleitung

Beliebte Blutdruckmessgerät Handbücher anderer Marken

Little Doctor

Little Doctor LD7 Bedienungsanleitung

Microlife

Microlife WatchBP Office Targe Bedienungsanleitung

Omron

Omron M6W Handbuch

Mx Onda

Mx Onda MX-CP2395 Bedienungsanleitung

Braun

Braun VitalScan 1 Bedienungsanleitung

Little Doctor

Little Doctor LD-91 Bedienungsanleitung

Sanitas

Sanitas SBM 09 Bedienungsanleitung

A&D

A&D LifeSource UB-328 Bedienungsanleitung

König Electronic

König Electronic HC-BLDPRESS200 Bedienerhandbuch

Leicke

Leicke Sharon Bedienungsanleitung

Omron

Omron M6 Comfort Bedienungsanleitung

3B SCIENTIFIC

3B SCIENTIFIC U11395 Bedienungsanleitung

Soehnle

Soehnle SYSTO MONITOR 100 Bedienungsanleitung

Nasco Healthcare

Nasco Healthcare Simulaids Life/form LF01095U Referenzhandbuch

Microlife

Microlife WatchBP office Bedienungsanleitung

HoMedics

HoMedics MiBody 360 Bedienungsanleitung

ForaCare

ForaCare FORA P30 Plus Bedienungsanleitung

JOYTECH

JOYTECH DBP-6296B Bedienungsanleitung