Pilz PSSu E F BSW Bedienungsanleitung

Operating Manual — No. 21372-EN-04

Decentralised system PSSuniversal I/O

Operating Manual PSSu E F BSW(-T)

PSSu E F BSW(-T)

This document is a translation of the original document.

All rights to this documentation are reserved by Pilz GmbH & Co. KG. Co ies may be made

for internal ur oses.

Suggestions and comments for im roving this documentation will be gratefully received.

Pilz®, PIT®, PMI®, PNOZ®, Primo®, PSEN®, PSS®, PVIS®, SafetyBUS ®, SafetyEYE®,

SafetyNET ®, the s irit of safety® are registered and rotected trademarks of

Pilz GmbH & Co. KG in some countries.

SD means Secure Digital.

Preface

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected] 1

Contents

Contents Page

Chapter 1 Introduction

1.1 Validity of documentation 1-1

1.1.1 Retaining the documentation 1-1

1.2 Overview of documentation 1-2

1.3 Definition of symbols 1-3

Chapter 2 Overview

2.1 Module structure 2-1

2.1.1 Module features 2-1

2.2 Front view 2-2

Chapter 3 Safety

3.1 Intended use 3-1

3.2 Safety regulations 3-3

3.2.1 Use of qualified personnel 3-3

3.2.2 Warranty and liability 3-3

3.2.3 Disposal 3-3

Chapter 4 Function description

4.1 Module features 4-1

4.1.1 Integrated protection mechanisms 4-1

4.1.2 Function description 4-1

4.2 Configuration 4-4

4.2.1 Addressing with SafetyBUS p 4-4

4.2.2 Addresses in the process image 4-5

4.2.3 FS error behaviour 4-5

Chapter 5 Installation

5.1 General installation guidelines 5-1

5.1.1 Dimensions 5-1

5.2 Installing the base module 5-2

5.3 Inserting and removing an electronic

module

5-3

5.3.1 Inserting an electronic module 5-3

5.3.2 Removing an electronic module 5-4

5.3.3 Changing an electronic module during

operation

5-5

Contents

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]

Chapter 6 Wiring

6.1 General wiring guidelines 6-1

6.1.1 Mechanical connection of the base

modules

6-1

6.2 Terminal configuration 6-4

6.3 Connecting the module 6-7

Chapter 7 Operation

7.1 Messages 7-1

7.2 Display elements 7-2

7.2.1 Display elements for module diagnostics 7-2

7.2.2 Display elements for supply voltage 7-3

Chapter 8 Technical details

8.1 Technical details 8-1

8.2 Order reference 8-3

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected] 1-1

1.1 Validity of documentation

1 Introduction

11000Introduc tionIntroduc tion1-1.1Validity of documenta tion1100Validity of documenta tion1-][BA Einf Gültigk eit_(T)

This documentation is valid for the products PSSu E F BSW and

PSSu E F BSW-T. It is valid until new documentation is published.

Einf Einleitun g

This operating manual explains the function and operation, describes

the installation and provides guidelines on how to connect the product .

][Bildunterschrift BSW

Electronic module to switch off the periphery supply for failsafe applica-

tions

1.1.1 Retaining the documentation

Retaining the documentation1-Einf Aufbewahren

This documentation is intended for instruction and should be retained

for future reference.

1.2 Overview of documentation

1 Introduction

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]

1-2

1.2Overview of documentation1200Overview of documentation1-][BA Einf Übersicht E-Modul

1 Introduction

The introduction is designed to familiarise you with the contents, struc-

ture and specific order of this manual.

2 Overview

This chapter provides information on the product's most important fea-

tures.

3 Safety

This chapter must be read as it contains important information on safety

and intended use.

4 Function Description

This chapter describes the product's individual components.

5 Installation

This chapter explains how to install the product.

6 Wiring

This chapter describes the product's wiring.

7 Operation

This chapter explains the display elements and advises on what to do if

a fault occurs.

8 Technical Details

This chapter contains the product's technical details and order refer-

ence.

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected] 1-3

1.3 Definition of symbols

1 Introduction

1.3Definition of symbols1300Definition of symbols1-Einfhrung Zeichen

Information that is particularly important is identified as follows:

DANGER!

This warning must be heeded! It warns of a hazardous situation

that poses an immediate threat of serious injury and death and

indicates preventive measures that can be taken.

WARNING!

This warning must be heeded! It warns of a hazardous situation

that could lead to serious injury and death and indicates preven-

tive measures that can be taken.

CAUTION!

This refers to a hazard that can lead to a less serious or minor

injury plus material damage, and also provides information on

preventive measures that can be taken.

NOTICE

This describes a situation in which the product or devices could

be damaged and also provides information on preventive meas-

ures that can be taken.

INFORMATION

This gives advice on applications and provides information on

special features, as well as highlighting areas within the text that

are of particular importance.

1 Introduction

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]

1-4

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected] 2-1

2.1 Module structure

2 Overview

22000OverviewOverview2-2.1Module structure2100Module structure2-][BA bersicht Aufba u

A module consists of

Electronic module and

Base module with

– Screw terminals or

– Cage clamp terminals

The base modules are the carrier units for the electronic modules and

are used to connect the field wiring. The electronic modules are inserted

on to the base modules and determine the module's function.

Details of the base modules that can be used are available in the chapter

entitled “Intended Use”.

2.1.1 Module features

Module features2-][Merkmale_Versorgung BSW

Infeed for periphery supply

Infeed for C-rail supply

Failsafe switching off of the periphery supply (block switching)

][Merkm ale_LED BSW LEDs for:

– Switch status of periphery supply

– Periphery supply

– Module error

][Merkm ale_Zus atz Application range depends on the base module

][Geraetemerkmal_T Coated version of the module:

PSSu E F BSW-T: for increased environmental requirements

2.2 Front view

2 Overview

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]

2-2

2.2Front view2200Front view2-BA Frontansicht

][BA_Frontansicht Legende Diag - Stat lang

Key:

A: Electronic module

PSSu E F BSW

PSSu E F BSW-T

B: Base module

1: LED for module diagnostics

2: Labelling strip with:

– Name of electronic module

– Order number

– Serial number

– Hardware version number

–2D code

3: Labelling strip for the terminal configuration on the base module

4: Status LEDs

5: Name of electronic module

6: Connection level 1

7: Connection level 2

8: Connection level 3

2111

2212

2313

Err

11 21

0V 22

13 23

C24

PSSu E F

BSW

24V

24V 24V

2414

PSSu E F

BSW

312230

000000

001

Andere Handbücher für PSSu E F BSW

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Pilz E/A-System Handbücher

Pilz

Pilz PNOZ msi9p Bedienungsanleitung

Pilz

Pilz PSSu E S 4AO U Bedienungsanleitung

Pilz

Pilz PSS u2 ES PSP Bedienungsanleitung

Pilz

Pilz PSSuniversal Benutzerhandbuch

Pilz

Pilz PSSu E F AI U Bedienungsanleitung

Pilz

Pilz PSS u2 Bedienungsanleitung

Pilz

Pilz PSS u2 ES 4AI I Bedienungsanleitung

Pilz

Pilz PSS u2 ES 4DOD 0.5A Bedienungsanleitung

Pilz

Pilz PSSu E F INC Bedienungsanleitung

Pilz

Pilz PSS u2 ES 8DID Bedienungsanleitung

Pilz

Pilz PSSu H FS2 SN SD Bedienungsanleitung

Pilz

Pilz PSSu K F INC Bedienungsanleitung

Pilz

Pilz PSSu E S 2AO U Bedienungsanleitung

Pilz

Pilz PSS u2 ES 16DI Bedienungsanleitung

Pilz

Pilz PSS u2 P0 F/S EIP Bedienungsanleitung

Pilz

Pilz PSSu E F PS Bedienungsanleitung

Pilz

Pilz PSSu E S 4DI-D Bedienungsanleitung

Pilz

Pilz PSSu H SB-T Bedienungsanleitung

Pilz

Pilz PSSu E S 2DO 2 Bedienungsanleitung

Pilz

Pilz PSS u2 ES 8PTD 24V 0V Bedienungsanleitung

Pilz

Pilz PSSu E F 2DO 2 Bedienungsanleitung

Pilz

Pilz PSS u2 P0 F/S EIP Bedienungsanleitung

Pilz

Pilz PSS u2 ES 8DOD 0.5A Bedienungsanleitung

Pilz

Pilz PSS u2 EF 2DO R 8A Bedienungsanleitung

Beliebte E/A-System Handbücher anderer Marken

WAGO

WAGO 750-344 Bedienungsanleitung

Teknim

Teknim TWM-1887 Bedienungsanleitung

Intelligent Appliance

Intelligent Appliance IA-2662-E Bedienungsanleitung

BERGHOF

BERGHOF ECC DIO 16/16 Bedienungsanleitung

Advantech

Advantech PCM-27J3AU Installations- und Betriebshandbuch

Festo

Festo CP-E08-M12-CL Bedienungsanleitung

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung

Hitachi

Hitachi HX-RIO3 Series Bedienungsanleitung

NUUO

NUUO SCB-A08 Bedienungsanleitung

M-system

M-system R3Y-RS8 Bedienungsanleitung

jablotron

jablotron JB-110N Bedienungsanleitung

Omron

Omron SYSMAC C200H Bedienungsanleitung

DOLD

DOLD SAFEMASTER M Bedienungsanleitung

ABB

ABB OPT-MF-001 Bedienungsanleitung

Omron

Omron SYSMAC C2000H Bedienungsanleitung

Helmholz

Helmholz TB20 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-AD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL305 Bedienungsanleitung