Pilz PSSu E S 4DI-D Bedienungsanleitung

Operating Manual — No. 1001322-EN-02

Decentralised system PSSuniversal I/O

Operating Manual PSSu E S 4DI-D

Operatin g Manual PSSu E S 4DI-D

PSSu E S 4DI-D

This document is a translation of the original document.

All rights to this documentation are reserved by Pilz GmbH & Co. KG. Co ies may be made

for internal ur oses.

Suggestions and comments for im roving this documentation will be gratefully received.

Pilz®, PIT®, PMI®, PNOZ®, Primo®, PSEN®, PSS®, PVIS®, SafetyBUS ®, SafetyEYE®,

SafetyNET ®, the s irit of safety® are registered and rotected trademarks of

Pilz GmbH & Co. KG in some countries.

SD means Secure Digital.

Preface

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected] 1

Contents

Contents Page

Chapter 1 Introduction

1.1 Validity of documentation 1-1

1.1.1 Retaining the documentation 1-1

1.1.2 Terminology: System environment A and B 1-1

1.2 Overview of documentation 1-2

1.3 Definition of symbols 1-3

Chapter 2 Overview

2.1 Module structure 2-1

2.1.1 Module features 2-1

2.2 Front view 2-2

Chapter 3 Safety

3.1 Intended use 3-1

3.2 Safety regulations 3-2

3.2.1 Use of qualified personnel 3-2

3.2.2 Warranty and liability 3-2

3.2.3 Disposal 3-2

Chapter 4 Function description

4.1 Module features 4-1

4.1.1 Function description 4-1

4.1.2 Integrated protection mechanisms 4-2

4.1.3 Reaction times 4-2

4.2 Configuration 4-3

4.2.1 Addresses in the process image 4-3

Chapter 5 Installation

5.1 General installation guidelines 5-1

5.1.1 Dimensions 5-1

5.2 Installing the base module 5-3

5.3 Inserting and removing an electronic

module

5-4

5.3.1 Inserting an electronic module 5-4

5.3.2 Removing an electronic module 5-5

5.3.3 Changing an electronic module during

operation

5-5

Contents

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]

Chapter 6 Wiring

6.1 General wiring guidelines 6-1

6.1.1 Mechanical connection of the base

modules

6-1

6.2 Terminal configuration 6-3

6.3 Connecting the module 6-5

Chapter 7 Operation

7.1 Messages 7-1

7.2 Display elements 7-2

7.2.1 Display elements for module diagnostics 7-2

7.2.2 Display elements for input status 7-3

Chapter 8 Technical details

8.1 Technical details 8-1

8.2 Order reference 8-3

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected] 1-1

1.1 Validity of documentation

1 Introduction

11000IntroductionIntroduction1-1.1Validity of documentation1100Validity of documentation1-Einf Gltigkeit der Dokumentation

This documentation is valid for the product PSSu E S 4DI-D. It is valid

until new documentation is published.

Einf Einleitung

This operating manual explains the function and operation, describes

the installation and provides guidelines on how to connect the product .

1.1.1 Retaining the documentation

Retaining the documentation1-Einf Aufbewahren

This documentation is intended for instruction and should be retained

for future reference.

1.1.2 Terminology: System environment A and B

Terminology: System environment A and B1-][BA Einf Begriffsdefinition Sys A + B

The PSSu system can be used in two different system environments.

The module's application area is described in the chapter "Intended

Use" of the manual.

The distinction is made between

PSSu in system environment A

PSSu in system environment B

The distinction is based on the application area of the PSSu system.

PSSu in system environment A may be used in the

Decentralised system PSSu I/O with SafetyBUS p

Decentralised system PSSu I/O with ST fieldbuses such as CANopen,

DeviceNet

Not in the automation system PSS 4000

PSSu in system environment B may be used in the

Automation system PSS 4000, e.g. with the

– Decentralised system PSSu I/O with SafetyNET p

– Control system PSSu PLC

– Control system PSSu multi

][BA Einf Begriffsdefinition Zusatz Sys A

The module PSSu E S 4DI-D is exclusively for use in system environ-

ment A.

1.2 Overview of documentation

1 Introduction

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]

1-2

1.2Overview of documentation1200Overview of documentation1-][BA Einf Übersicht E-Modul

1 Introduction

The introduction is designed to familiarise you with the contents, struc-

ture and specific order of this manual.

2 Overview

This chapter provides information on the product's most important fea-

tures.

3 Safety

This chapter must be read as it contains important information on safety

and intended use.

4 Function Description

This chapter describes the product's individual components.

5 Installation

This chapter explains how to install the product.

6 Wiring

This chapter describes the product's wiring.

7 Operation

This chapter explains the display elements and advises on what to do if

a fault occurs.

8 Technical Details

This chapter contains the product's technical details and order refer-

ence.

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected] 1-3

1.3 Definition of symbols

1 Introduction

1.3Definition of symbols1300Definition of symbols1-Einfhrung Zeichen

Information that is particularly important is identified as follows:

DANGER!

This warning must be heeded! It warns of a hazardous situation

that poses an immediate threat of serious injury and death and

indicates preventive measures that can be taken.

WARNING!

This warning must be heeded! It warns of a hazardous situation

that could lead to serious injury and death and indicates preven-

tive measures that can be taken.

CAUTION!

This refers to a hazard that can lead to a less serious or minor

injury plus material damage, and also provides information on

preventive measures that can be taken.

NOTICE

This describes a situation in which the unit(s) could be damaged

and also provides information on preventive measures that can

be taken. It also highlights areas within the text that are of partic-

ular importance.

INFORMATION

This gives advice on applications and provides information on

special features.

1 Introduction

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]

1-4

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected] 2-1

2.1 Module structure

2 Overview

22000OverviewOverview2-2.1Module structure2100Module structure2-][BA Übersicht Aufbau

A module consists of

Electronic module and

Base module with

– Screw terminals or

– Cage clamp terminals

The base modules are the carrier units for the electronic modules and

are used to connect the field wiring. The electronic modules are inserted

on to the base modules and determine the module's function.

Details of the base modules that can be used are available in the chapter

entitled “Intended Use”.

2.1.1 Module features

Module features2-Geraetemerkmale_Modul_Zusatz BA Einleitung_alt

The module has the following features:

][Merkmale_Ein_Aus ST-Eingang 4Digital inputs

][Merkmale_Ausgänge PD-D/4DI-D 2Outputs for periphery supply:

– Current load capacity per output: 0.25 A

– Short circuit-proof

– Overload-proof

][Merkmale_LED Eingang LEDs for:

– Switch status of each input

– Module error

][Merkm ale_Zusatz Diag The module provides advanced diagnostic data.

][Merkmale_Zusatz ST-Module Sys A For standard applications in system environment A

2.2 Front view

2 Overview

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]

2-2

2.2Front view2200Front view2-BA Frontansicht

][BA_Frontansicht Legende Diag - Stat

Key:

A: Electronic module PSSu E S 4DI-D

B: Base module

1: LED for module diagnostics

2: Labelling strip with:

– Description of electronic module

– Order number

– Serial number

– Hardware version number

–2Dcode

3: Labelling strip for the terminal configuration on the base module

4: Status LEDs

5: Description of electronic module

6: Connection level 1

7: Connection level 2

8: Connection level 3

9: Connection level 4

Err

I0 21

12 22

13 23

I2 24

PSSu E S

4DI-D

S1 S1

S2 S2

2111

2212

2313

2414

PSSu E S

4DI-D

312401

100000

001

Andere Handbücher für PSSu E S 4DI-D

Inhaltsverzeichnis

Andere Pilz E/A-System Handbücher

Pilz

Pilz PSSu K F INC Bedienungsanleitung

Pilz

Pilz PSS u2 P0 F/S EIP Bedienungsanleitung

Pilz

Pilz PSS u2 ES 8DOD 0.5A Bedienungsanleitung

Pilz

Pilz PSSu E S 2AO I Bedienungsanleitung

Pilz

Pilz PSS u2 ES 4DOD 2A Bedienungsanleitung

Pilz

Pilz PSS u2 EF 8DO 0.5A Bedienungsanleitung

Pilz

Pilz PSSu E S 4AO U Bedienungsanleitung

Pilz

Pilz PSSu E F INC Bedienungsanleitung

Pilz

Pilz PSS u2 Bedienungsanleitung

Pilz

Pilz PSSu E F PS Bedienungsanleitung

Pilz

Pilz PSS u2 ES 4AI I Bedienungsanleitung

Pilz

Pilz PSS u2 ES PSP Bedienungsanleitung

Pilz

Pilz PSSu E F PS Bedienungsanleitung

Pilz

Pilz PSSu H FS2 SN SD Bedienungsanleitung

Pilz

Pilz PSSu E S ABS SSI Bedienungsanleitung

Pilz

Pilz PSSu H F PN o Bedienungsanleitung

Pilz

Pilz PSS u2 ES 6DI 120V AC Bedienungsanleitung

Pilz

Pilz PNOZ ml1p Bedienungsanleitung

Pilz

Pilz PSS u2 ES 16DI Bedienungsanleitung

Pilz

Pilz PSS u2 Bedienungsanleitung

Pilz

Pilz PSSu E S 2DOR 2 Bedienungsanleitung

Pilz

Pilz PSS u2 ES 4DOD 0.5A Bedienungsanleitung

Pilz

Pilz PSSu H SB-T Bedienungsanleitung

Pilz

Pilz PSSu E S 2DO 2 Bedienungsanleitung

Beliebte E/A-System Handbücher anderer Marken

WAGO

WAGO 750-344 Bedienungsanleitung

Teknim

Teknim TWM-1887 Bedienungsanleitung

Intelligent Appliance

Intelligent Appliance IA-2662-E Bedienungsanleitung

BERGHOF

BERGHOF ECC DIO 16/16 Bedienungsanleitung

Advantech

Advantech PCM-27J3AU Installations- und Betriebshandbuch

Festo

Festo CP-E08-M12-CL Bedienungsanleitung

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung

Hitachi

Hitachi HX-RIO3 Series Bedienungsanleitung

NUUO

NUUO SCB-A08 Bedienungsanleitung

M-system

M-system R3Y-RS8 Bedienungsanleitung

jablotron

jablotron JB-110N Bedienungsanleitung

Omron

Omron SYSMAC C200H Bedienungsanleitung

DOLD

DOLD SAFEMASTER M Bedienungsanleitung

ABB

ABB OPT-MF-001 Bedienungsanleitung

Omron

Omron SYSMAC C2000H Bedienungsanleitung

Helmholz

Helmholz TB20 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-AD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL305 Bedienungsanleitung