Pilz PSSu E S PD-D Bedienungsanleitung

PSSu E S PD-D

Operating Manual 21975-EN-05

}Decentralised system PSSuniversal I/O

Preface

This document is a translation of the original document.

All rights to this documentation are reserved by Pilz GmbH & Co. KG. Copies may be made

for internal purposes. Suggestions and comments for improving this documentation will be

gratefully received.

Pilz®, PIT®, PMI®, PNOZ®, Primo®, PSEN®, PSS®, PVIS®, SafetyBUS p®,

SafetyEYE®, SafetyNET p®, the spirit of safety® are registered and protected trademarks

of Pilz GmbH & Co. KG in some countries.

SD means Secure Digital

Contents

Operating Manual PSSu E S PD-D

21975-EN-05 3

Section 1 Introduction 5

1.1 Validity of documentation 5

1.1.1 Retaining the documentation 5

1.1.2 Terminology: System environment A and B 5

1.2 Definition of symbols 6

Section 2 Overview 7

2.1 Module structure 7

2.2 Module features 7

2.3 Front view 8

Section 3 Safety 10

3.1 Intended use 10

3.2 Safety regulations 11

3.2.1 Use of qualified personnel 11

3.2.2 Warranty and liability 11

3.2.3 Disposal 11

Section 4 Function description 12

4.1 Block diagram 12

4.2 Module features 12

4.2.1 Functions 12

4.2.2 Integrated protection mechanisms 12

4.3 Configuration 13

4.3.1 PSSu assignment in system environment A 13

4.3.1.1 Addresses in the process image 13

4.3.1.2 Status byte 13

4.3.2 PSSu assignment in system environment B 14

Section 5 Installation 15

5.1 General installation guidelines 15

5.1.1 Dimensions 15

5.2 Installing the base module 16

5.3 Inserting and removing an electronic module 17

5.3.1 Inserting an electronic module 18

5.3.2 Removing an electronic module 19

5.3.3 Changing an electronic module during operation 19

Section 6 Wiring 20

6.1 General wiring guidelines 20

6.1.1 Mechanical connection of the base modules 20

6.2 Terminal configuration 22

Section 7 Operation 24

7.1 Messages 24

7.2 Display elements 25

7.2.1 Display elements for module diagnostics 25

Contents

Operating Manual PSSu E S PD-D

21975-EN-05 4

7.2.2 Display elements for output status 25

Section 8 Technical Details 26

Section 9 Order reference 28

9.1 Product 28

9.2 Accessories 28

Introduction

Operating Manual PSSu E S PD-D

21975-EN-05 5

1 Introduction

1.1 Validity of documentation

This documentation is valid for the product PSSu E S PD-D. It is valid until new documenta-

tion is published.

This operating manual explains the function and operation, describes the installation and

provides guidelines on how to connect the product.

Electronic module operates as distributor for periphery supply, with advanced diagnostics.

1.1.1 Retaining the documentation

This documentation is intended for instruction and should be retained for future reference.

1.1.2 Terminology: System environment A and B

The PSSu system can be used in two different system environments. The module's applic-

ation area is described in the chapter "Intended Use" of the manual.

The distinction is made between

}PSSu in system environment A

}PSSu in system environment B

The distinction is based on the application area of the PSSu system.

PSSu in system environment A may be used in the

}Decentralised system PSSu I/O

}Not in the automation system PSS 4000

PSSu in system environment B may be used in the

}Automation system PSS 4000, e.g. with

– Decentralised system PSSu I/O with SafetyNET p

– Control system PSSu PLC

– Control system PSSu multi

Introduction

Operating Manual PSSu E S PD-D

21975-EN-05 6

1.2 Definition of symbols

Information that is particularly important is identified as follows:

DANGER!

This warning must be heeded! It warns of a hazardous situation that poses

an immediate threat of serious injury and death and indicates preventive

measures that can be taken.

WARNING!

This warning must be heeded! It warns of a hazardous situation that could

lead to serious injury and death and indicates preventive measures that can

be taken.

CAUTION!

This refers to a hazard that can lead to a less serious or minor injury plus

material damage, and also provides information on preventive measures

that can be taken.

NOTICE

This describes a situation in which the product or devices could be dam-

aged and also provides information on preventive measures that can be

taken. It also highlights areas within the text that are of particular import-

ance.

INFORMATION

This gives advice on applications and provides information on special fea-

tures.

Overview

Operating Manual PSSu E S PD-D

21975-EN-05 7

2 Overview

2.1 Module structure

A module consists of

}Electronic module and

}Base module with

– Screw terminals or

– Cage clamp terminals

The base modules are the carrier units for the electronic modules and are used to connect

the field wiring. The electronic modules are inserted on to the base modules and determine

the module's function.

Details of the base modules that can be used are available in the chapter entitled “Intended

Use”.

2.2 Module features

The product has the following features:

}Outputs for periphery supply: 4

}Current load capacity per output: 1,50 A

– Short circuit-proof

– Overload-proof

}LEDs for:

– Switch status of each output

– Module error

}The module provides advanced diagnostic data.

}Optional access to the advanced diagnostic data in the process image (system environ-

ment A only)

Overview

Operating Manual PSSu E S PD-D

21975-EN-05 8

2.3 Front view

2111

2212

2313

2414

Err

(C)

PSSu E S

PD-D

PSSu E S

PD-D

312197

000000

001

Legend:

}A: Electronic module

}B: Base module

}1: LED for module diagnostics

}2: Labelling strip with:

– Name of electronic module

– Order number

– Serial number

– Hardware version number

– 2D code

}3: Labelling strip for the terminal configuration on the base module

}4: Status LEDs

}5: Name of electronic module

}6: Connection level 1

}7: Connection level 2

}8: Connection level 3

Overview

Operating Manual PSSu E S PD-D

21975-EN-05 9

}9: Connection level 4

}10: Square mounting holes (connection levels 1, 2, 3 and 4)

– With screw to loosen/tighten the screw terminal on base modules with screw termin-

als

– With mechanism to operate the cage clamp on base modules with cage clamp ter-

minals

}11: Round connection holes (connection levels 1, 2, 3 and 4) for connecting the signal

lines

}12: Mounting slot for colour marker to label the connection level (connection levels 1, 2,

3 and 4)

Safety

Operating Manual PSSu E S PD-D

21975-EN-05 10

3 Safety

3.1 Intended use

The module may be used for standard applications in system environment A and B.

The module may be used for additional connections to the periphery supply. The periphery

supply can be drawn from the connections, but may not be fed through that route.

Intended use includes making the electrical installation EMC-compliant. Please refer to the

guidelines stated in the "PSSuniversal Installation Manual". The module is designed for use

in an industrial environment. It is not suitable for use in a domestic environment, as this can

lead to interference.

The following is deemed improper use in particular:

}Any component, technical or electrical modification to the module

}Use of the module outside the areas described in this manual

}Any use of the module that is not in accordance with the technical details.

INFORMATION

The module is supported by:

}PSSuniversal Configurator and PSSuniversal Assistant from Version

1.6.0

}PAS4000 from version 1.8.0

– We recommend that you always use the latest version (download

from www.pilz.de).

The PSSu E S PD-D module may be used in conjunction with the following base modules:

}PSSu BP 1/8 S

}PSSu BP 1/8 C

}PSSu BP-C 1/8 S

}PSSu BP-C 1/8 C

}PSSu BP 1/12 S

}PSSu BP 1/12 C

}PSSu BP-C1 1/12 S

}PSSu BP-C1 1/12 C

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Pilz Industrieanlagen Handbücher

Pilz

Pilz PNOZ Betriebsanleitung

Pilz

Pilz PSEN sl-1.0p 2.2 Bedienungsanleitung

Pilz

Pilz 22209-3FR-01 Bedienungsanleitung

Pilz

Pilz PSEN sl-0.5p 1.1 Bedienungsanleitung

Pilz

Pilz PSSu E F 2DOR 8 Bedienungsanleitung

Pilz

Pilz PSEN op2B/1 Series Bedienungsanleitung

Pilz

Pilz PSEN op2H-SL Series Bedienungsanleitung

Pilz

Pilz PSEN cs5.1n Bedienungsanleitung

Pilz

Pilz PSEN sc M 3.0 08-12 Bedienungsanleitung

Pilz

Pilz PSEN 2.1a-20 Bedienungsanleitung

Pilz

Pilz PSEN op2.1 L- Bedienungsanleitung

Pilz

Pilz PITestop Bedienungsanleitung

Pilz

Pilz PSSu E F DI OZ 2 Bedienungsanleitung

Pilz

Pilz 19 157-05 PZW Bedienungsanleitung

Pilz

Pilz PSENop 3.3 Bedienungsanleitung

Pilz

Pilz PNOZ mi2p Bedienungsanleitung

Pilz

Pilz PSEN b1 Bedienungsanleitung

Pilz

Pilz PIT si3.1 Bedienungsanleitung

Pilz

Pilz PSSu H F PN Bedienungsanleitung

Pilz

Pilz PSS 4000 Bedienungsanleitung

Pilz

Pilz PITreader Bedienungsanleitung

Pilz

Pilz PSEN 1.1p-22 Bedienungsanleitung

Pilz

Pilz PSSu E S 2DOR 10 Bedienungsanleitung

Pilz

Pilz PSEN sl-0.5p 3.1 Bedienungsanleitung

Beliebte Industrieanlagen Handbücher anderer Marken

ABB

ABB Unifix AD Handbuch

Mark 7

Mark 7 Evolution Bedienungsanleitung

Husky

Husky HyPET Bedienungsanleitung

bora

bora PM-1800 Bedienungsanleitung

Grizzly

Grizzly T32428 Bedienungsanleitung

Siemens

Siemens 8MF1 Series Bedienungsanleitung

ABB

ABB HT610965 Bedienungsanleitung

ABB

ABB SafeLink Bedienungsanleitung

Phoenix

Phoenix PHX-150 Bedienungsanleitung

ABB

ABB A165-L32 Bedienungsanleitung

ABB

ABB HT842936 Bedienungsanleitung

Hermetica

Hermetica 10 Series Bedienungsanleitung

HORNER

HORNER OEE Solution Bedienungsanleitung

Hammerhead

Hammerhead HG375 Bedienungsanleitung

SCHUNK

SCHUNK VERO-S NSE-A3 138 Gebrauchsanweisung

ABB

ABB HT566657 Bedienungsanleitung

Webasto

Webasto GSE CAN Bedienungsanleitung

ABB

ABB HT614003 Bedienungsanleitung