Pioneer AVH-X4500BT Montageanleitung

AVH-X4500BT and AVH-X2500BT Firmware Update for iPhone® 5 Compatibility

(May 2013)

The following preparatory steps must first be undertaken in order to connect an iPhone 5 with lightning

connector to your unit and use AppRadio Mode.

A. Download the firmware update files from Pioneer's website

B. Update the firmware on your unit

C. Connect your iPhone 5 to your unit using a VGA/USB interface cable for iPod/iPhone

(CD-IV202AV, sold separately)

D. Pair and connect your iPhone 5 with your unit via Bluetooth wireless technology

Once Steps Athrough D have been completed, the [Apps] key on the Home screen will become active,

allowing the user to switch to AppRadio Mode.

NOTE:

This firmware update will provide enhanced iPhone 5 compatibility to enable AppRadio Mode,

however, due to an unforeseen communication error with the Pandora internet radio app, audio

playback and display of metadata from Pandora are disrupted. If you use Pandora and don’t intend

to use AppRadio Mode at this time, please do not install this update. Pioneer is working on an

update to allow for both Pandora and AppRadio Mode, to be released at a future date.

IMPORTANT

ziPod source is not available when using an iPhone 5 in AppRadio Mode. When you want to play

music and/or video files on your iPhone 5, please first install CarMediaPlayer on your iPhone 5

and then launch CarMediaPlayer while in AppRadio Mode.

A. Downloading the Firmware Update Files

INPORTANT

Please download and print these Firmware Update instructions before downloading and installing the

firmware update. It is very important that you complete all steps correctly and the order described

below.

WARNING! This firmware update applies only to AVH-X4500BT and AVH-X2500BT units sold in

the US and Canada.

Note: If you have any difficulty carrying out these instructions, or wish to have this update

performed by Pioneer, please contact the Pioneer Customer Support Center toll free at (800)

421-1404 during regular business hours (M-F 10AM- 7:30PM Eastern Time, excluding holidays)

for assistance. If this firmware update is performed by Pioneer, there is a charge of $60.00 (this

charge includes return shipping of the updated unit within the U.S.). Charges for

removal/reinstallation of the unit and shipment to Pioneer are the customer’s responsibility.

PROCEDURE

1. Download the firmware update files by clicking on the following link and finding your

product: http://www.pioneerelectronics.com/PUSA/Support/Downloads

2. Extract the download file.

The downloaded file will produce the following two files when decompressed: “PDB093.bin”

and “PEH406A.bin”

Once the file download is complete, locate the file on your hard drive and then double click the

file to decompress it. If you do not have a file decompression utility installed on your computer,

you may download WinZip at http:/www.winzip.com (a purchase may be required).

B. Updating the Firmware on Your Unit

INPORTANT

zPlease DO NOT perform this firmware update if the model number of your Pioneer in-dash

multimedia unit is anything other than AVH-X4500BT or AVH-X2500BT.

¾The model number for the AVH-X4500BT is located to the right of the eject button at the

bottom right corner of the unit.

¾The model number for the AVH-X2500BT is located to the right of the disc slot on the front of

the unit.

zThere are two separate firmware updates that must be performed: the PDB software update and

PEH software update.

zIt is necessary to copy only one update file onto a USB storage device at a time.

zUSB storage device requirements:

¾USB specification 2.0 and 128 MB or larger.

¾Should be blank (should not contain any files) and formatted in FAT32.

zEnsure that the update file is located within the root (top) folder of your USB storage device. There

should be no other files within the USB storage device.

zWhile your unit is being updated, DO NOT turn off the system’s power and DO NOT touch the

unit’s touch panel screen. Failure to heed this warning may result in severe damage to your unit.

zDO NOT remove the USB storage device during the firmware update process.

zPerforming the firmware update will restore all settings to their default values.

zDisconnect any external mobile devices that are currently connected to your unit.

BEFORE UPDATING

Updating the firmware of your unit will result in the following changes.

¾The “Pandora Connect Mode” --- “Wired” , “Bluetooth” options under the setting menu will change

to “Pandora connection” --- “ iPhone” , “Android” after the update.

¾The “RGB Input” --- “iPhone”, ”NAVI” options under the system setting menu will change to “iPhone

(CD-IU201S)”,”iPhone (VGA adapter)”, and “NAVI” after the updates.

¾RGB Input can only be set when all of the following conditions are met.

- The USB storage device is not connected to USB/iPod input.

- No Bluetooth connection.

- The source is turned off.

¾The [Apps] icon on the Home screen will be changed

Appears when your iPhone with Lightning connector is connected via the VGA/USB

interface cable for iPod/iPhone (CD-IV202AV) (sold separately).

Appears when your iPhone with Lightning connector is connected via the VGA/USB

interface cable for iPod/iPhone (CD-IV202AV) (sold separately) and processing the

Bluetooth connection.

Appears when your iPhone with Lightning connector is connected via the VGA/USB

interface cable for iPod/iPhone (CD-IV202AV) (sold separately) and Bluetooth wireless

technology.

PROCEDURE

1. Connect a blank (formatted) USB storage device to your computer, and then locate and copy

the “PDB093.bin” file onto the USB storage device.

2. Turn the vehicle’s key to the ACC ON position while simultaneously pressing and holding the

[VOL-] button and [TRK<] button. Your unit will display the”Software update” screen:

3. Read the terms and conditions carefully and verify the details.

4. Connect the USB storage device to the USB/iPod input port.

Your unit will automatically recognize the PDB software update file:

5. The unit will display the current PDB version as well as the update version contained on the

USB storage device. Confirm that the version shown on the right side of the screen is Ver.

08.09:

The PDB software update process will automatically begin and the update progress is displayed

on screen:

6. Wait until the update process is complete. When the firmware update process is completed, the

unit will display the following screen:

7. Remove the USB storage device from the USB/iPod input port.

8. Press the reset button with a pen tip or other pointed instrument.

9. Once the unit has completely powered up, turn the vehicle’s key to the ACC OFF position.

10.Connect the USB storage device to your computer and delete the “PDB093.bin” file, then

locate and copy the “PEH406A.bin” file onto the USB storage device.

11.Turn the vehicle’s key to the ACC ON position while simultaneously pressing and holding the

[VOL-] button and [TRK<] button. Your unit will display the “Software update” screen.

12.Read the terms and conditions carefully and verify the details again.

13.Connect the USB storage device to the USB/iPod input port.

Your unit will automatically recognize the PEH software update file.

14.The unit will display the current PEH version as well as the update version contained on the

USB storage device. Confirm that the version shown on the right side of the screen is Ver.

“08.11”.

The PEH software update process will automatically begin and the update progress is displayed

on screen:

15.Wait until the update process is complete. Once the firmware update process is complete, the

unit will display the following screen:

16.Remove the USB storage device from the USB/iPod input port.

17.Press the reset button with a pen tip or other pointed instrument.

18.The firmware update is now complete.

C. Connecting your iPhone 5 with Lightning Connector

•A VGA/USB interface cable for iPod/iPhone (CD-IV202AV, sold separately) is required.

•A Lightning to USB Cable (supplied with iPhone 5) and a Lightning to VGA adapter (Apple Inc.

products, sold separately) are also required.

•AppRadio Mode should only be used in the connection configuration shown. Do not use any

other configuration when connecting your device.

PROCEDURE

1. Remove the USB storage device.

2. Disconnect the Bluetooth connection.

3. Turn the source off.

4. Press the home button to switch to the home display.

5. Touch the system key to open the system menu.

6. Touch “RGB Input” on the system menu to select the RGB input.

7. Touch and select “iPhone (VGA adapter)”.

Dieses Handbuch passt für folgende Modelle

Andere Pioneer Autoempfänger Handbücher

Pioneer

Pioneer Super Tuner III D DEH-P4800MP Bedienungsanleitung

Pioneer

Pioneer DEH-X6900BT Bedienungsanleitung

Pioneer

Pioneer CDX-FM1287 - CD Changer Bedienungsanleitung

Pioneer

Pioneer KEH-P7020R Bedienungsanleitung

Pioneer

Pioneer DEH-17 Bedienungsanleitung

Pioneer

Pioneer Super Tuner IIID MVH-P8200BT Bedienungsanleitung

Pioneer

Pioneer DEH-X5800BT Bedienungsanleitung

Pioneer

Pioneer Premier DEH-P760MP Bedienungsanleitung

Pioneer

Pioneer DEH-P5780MP Bedienungsanleitung

Pioneer

Pioneer DEH-4550BT Bedienungsanleitung

Pioneer

Pioneer AVIC-F50BT Bedienungsanleitung

Pioneer

Pioneer KEX-M9176ZT-02 Bedienungsanleitung

Pioneer

Pioneer SPH-DA02 Betriebsanleitung

Pioneer

Pioneer DVH-330UB Bedienungsanleitung

Pioneer

Pioneer DEH-1300 Bedienungsanleitung

Pioneer

Pioneer FX-MG8506ZT Bedienungsanleitung

Pioneer

Pioneer DEH-12E Bedienungsanleitung

Pioneer

Pioneer DEH-1700 Bedienungsanleitung

Pioneer

Pioneer FH-P4200MP/XU/UC Bedienungsanleitung

Pioneer

Pioneer AVIC-Z110BT Installationshandbuch

Pioneer

Pioneer XR-P670F Bedienungsanleitung

Pioneer

Pioneer P2600 - DEH Radio / CD Player Bedienungsanleitung

Pioneer

Pioneer DEH-P7500MP Bedienungsanleitung

Pioneer

Pioneer AVIC-F10BT Bedienungsanleitung

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

JVC

JVC KD-AHD69 Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung

Philips

Philips CEM5000 Bedienungsanleitung