Pioneer DEH-1450 Bedienungsanleitung

High power CD player with FM/AM tuner

Operation Manual

DEH-1450

DEH-1450B

English Español

Português (B)

«W

OÐ

Before You Start

About this manual 2

Precautions 2

Protecting your unit from theft 2

• Removing the front panel 2

• Attaching the front panel 2

What’s what 3

Power ON/OFF

Turning the unit on 4

Selecting a source 4

Turning the unit off 4

Tuner

Listening to the radio 4

Storing and recalling broadcast

frequencies 5

Tuning in strong signals 6

Storing the strongest broadcast

frequencies 6

Built-in CD Player

Playing a CD 6

Playing tracks in a random order 7

Repeating play 7

Pausing CD playback 7

Audio Adjustments

Introduction of audio adjustments 8

Using balance adjustment 8

Using the equalizer 9

• Recalling equalizer curves 9

• Adjusting equalizer curves 9

Adjusting loudness 9

Front image enhancer (FIE) 10

Adjusting source levels 10

Initial Settings

Adjusting initial settings 11

Setting the time 11

Setting the FM tuning step 12

Setting the AM tuning step 12

Additional Information

Setting the time display on or off 12

CD player and care 12

CD-R/CD-RW discs 13

Understanding built-in CD player error mes-

sages 13

Specifications 14

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to oper-

ate your model properly. After you have finished reading the instructions, put them

away in a safe place for future reference.

Contents

About this manual

This unit features a number of sophisticated

functions ensuring superior reception and oper-

ation. All the functions have been designed for

the easiest possible use, but many are not self-

explanatory. This operation manual will help you

benefit fully from this product’s potential and to

maximize your listening enjoyment.

We recommend that you familiarize yourself

with the functions and their operation by read-

ing through the manual before you begin using

this unit. It is especially important that you read

and observe precautions on this page and in

other sections.

Precautions

• Keep this manual handy as a reference for

operating procedures and precautions.

• Always keep the volume low enough so you

can hear sounds outside of the car.

• Protect this product from moisture.

• If the battery is disconnected or discharged,

the preset memory will be erased and must be

reprogrammed.

• Should this product fail to operate properly,

contact your dealer or nearest authorized

Pioneer Service Station.

Protecting your unit from theft

The front panel can be detached from the head

unit and stored in the protective case provided

to discourage theft.

Important

• Never use force or grip the display and the

buttons tightly when removing or attaching.

• Avoid subjecting the front panel to excessive

shocks.

• Keep the front panel out of direct sunlight and

high temperatures.

Removing the front panel

1 Press DETACH to release the front panel.

Press DETACH and the right side of the panel is

released from the head unit.

2 Grab the front panel and remove.

Grab the right side of the front panel and pull

away to the left. The front panel will be detached

from the head unit.

3 Put the front panel into the protective case

provided for safe keeping.

Attaching the front panel

1 Place the front panel flat against the head

unit.

2 Press the front panel into the face of the

head unit until it is firmly seated.

CAUTION: USE OF CONTROL OR

ADJUSTMENT OR PER-

FORMANCE OF PROCE-

DURES OTHER THAN

THOSE SPECIFIED

HEREIN MAY RESULT IN

HAZARDOUS RADIATION

EXPOSURE.

CAUTION: THE USE OF OPTICAL

INSTRUMENTS WITH

THIS PRODUCT WILL

INCREASE EYE HAZARD.

Before You Start

En 2

English Español Deutsch Français Italiano Nederlands

Before You Start

What’s what

1VOLUME button

Press to increase or decrease the volume.

2CD EJECT button

Press to eject a CD from your built-in CD

player.

3AUDIO button

Press to select various sound quality con-

trols.

4CLOCK button

Press to switch clock display on or off.

5EQ button

Press to select various equalizer curves.

65/∞/2/3buttons

Press to do manual seek tuning, fast for-

ward, reverse and track search controls. Also

used for controlling functions.

7LOUDNESS button

Press to switch loudness function on or off.

8SOURCE button

This unit is switched on by selecting a

source. Press to cycle through all of the

available sources.

91–6(PRESET TUNING) buttons

Press for preset tuning.

0LOCAL/BSM button

-BAND button

Press to select among three FM and one AM

band.

=DETACH button

Press to remove the front panel from the

head unit.

890-=

Power ON/OFF Tuner

En 4

English Español Deutsch Français Italiano Nederlands

Turning the unit on

Press SOURCE to turn the unit on.

When you select a source the unit is turned on.

Selecting a source

You can select a source you want to listen to. To

switch to the built-in CD player, load a disc in

this unit (refer to page 6).

Press SOURCE to select a source.

Press SOURCE repeatedly to switch between

the following sources:

Built-in CD player—Tuner

Notes

• When no disc is set in this product, built-in

CD player source will not change.

• When this unit’s blue/white lead is connected

to the car’s auto-antenna relay control termi-

nal, the car’s antenna extends when this

unit’s source is switched on. To retract the

antenna, switch the source off.

Turning the unit off

Press SOURCE and hold for at least one sec-

ond to turn the unit off.

Listening to the radio

If you are using this unit in North, Central or

South America, reset the AM tuning step (see

Setting the AM tuning step on page 12).

1BAND indicator

Shows which band the radio is tuned to, AM

or FM.

2FREQUENCY indicator

Shows to which frequency the tuner is

tuned.

3STEREO () indicator

Shows that the frequency selected is being

broadcast in stereo.

4PRESET NUMBER indicator

Shows what preset has been selected.

Tuner

1 Press SOURCE to select the tuner.

2UseVOLUME to adjust the sound level.

When you press VOLUME up/+, the volume is

raised and when pressed down/–, the volume is

lowered.

3 Press BAND to select a band.

Press BAND until the desired band is displayed,

FM1, FM2, FM3 for FM or AM.

4 To perform manual tuning, press 2or 3

with quick presses.

The frequencies move up or down step by step.

5 To perform seek tuning, press and hold 2

or 3for about one second and release.

The tuner will scan the frequencies until a

broadcast strong enough for good reception is

found.

• You can cancel seek tuning by pressing either

2or 3with a quick press.

• If you press and hold 2or 3you can skip

broadcasting stations. Seek tuning starts as

soon as you release the buttons.

Note

• When the frequency selected is being broad-

cast in stereo the STEREO ()indicator will

light.

Storing and recalling broadcast

frequencies

If you press any of the PRESET TUNING buttons

you can easily store up to six broadcast frequen-

cies for later recall with the touch of a button.

When you find a frequency that you want to

store in memory press a PRESET TUNING but-

ton and hold until the preset number stops

flashing.

The number you have pressed will flash in the

PRESET NUMBER indicator and then remain lit.

The selected radio station frequency has been

stored in memory.

The next time you press the same PRESET TUN-

ING button the radio station frequency is

recalled from memory.

Notes

• Up to 18 FM stations, 6 for each of the three

FM bands, and 6 AM stations can be stored in

memory.

• You can also use 5and ∞to recall radio sta-

tion frequencies assigned to PRESET TUNING

buttons.

Tuner Built-in CD player

En 6

English Español Deutsch Français Italiano Nederlands

Tuning in strong signals

Local seek tuning lets you tune in only those

radio stations with sufficiently strong signals for

good reception.

1 Press LOCAL/BSM to turn local seek tuning

on.

Local seek sensitivity (LOC) appears in the dis-

play.

2 When you want to return to normal seek

tuning, press LOCAL/BSM to turn local seek

tuning off.

Storing the strongest broadcast

frequencies

BSM (best stations memory) lets you automati-

cally store the six strongest broadcast frequen-

cies under PRESET TUNING buttons 1–6 and

once stored there you can tune in to those fre-

quencies with the touch of a button.

Press and hold LOCAL/BSM for about two

seconds to turn BSM on.

BSM begins to flash. While BSM is flashing the

six strongest broadcast frequencies will be

stored under PRESET TUNING buttons in order

of their signal strength. When finished, BSM

stops flashing.

• To cancel the storage process, press

LOCAL/BSM.

Note

• Storing broadcast frequencies with BSM may

replace broadcast frequencies you have saved

using PRESET TUNING.

Playing a CD

1TRACK NUMBER indicator

Shows the track currently playing.

2PLAY TIME indicator

Shows the elapsed playing time of the cur-

rent track.

1 Insert a CD into the CD loading slot.

Playback will automatically start.

CD loading slot

• You can eject a CD by pressing CD EJECT.

2 After a CD has been inserted, press

SOURCE to select the built-in CD player.

3UseVOLUME to adjust the sound level.

When you press VOLUME up/+, the volume is

raised and when pressed down/–, the volume is

lowered.

Built-in CD player

4 To perform fast forward or reverse, press

and hold 2or 3.

5 To skip back or forward to another track,

press 2or 3.

Pressing 3skips to the start of the next track.

Pressing 2once skips to the start of the current

track. Pressing again will skip to the previous

track.

Notes

• The built-in CD player plays one, standard,

12-cm or 8-cm (single) CD at a time. Do not

use an adapter when playing 8-cm CDs.

• Do not insert anything other than a CD into

the CD loading slot.

• If you cannot insert a disc completely or if

after you insert a disc the disc does not play,

check that the label side of the disc is up.

Press CD EJECT to eject the disc, and check

the disc for damage before inserting the disc

again.

• If the built-in CD player does not operate prop-

erly, an error message such as ERR14 may be

displayed. Refer to Understanding built-in CD

player error messages on page 13.

Playing tracks in a random order

Random play lets you play back tracks on the

CD in a random order.

1 Press 4 to turn random play on.

RDM appears in the display. Tracks will play in a

random order.

2 Press 4 to turn random play off.

Tracks will continue to play in order.

Repeating play

Repeat play lets you hear the same track over

again.

1 Press 5 to turn repeat play on.

RPT appears in the display. The track presently

playing will play and then repeat.

2 Press 5 to turn repeat play off.

The track presently playing will continue to play

and then play the next track.

Note

• If you perform track search or fast

forward/reverse, repeat play is automatically

cancelled.

Pausing CD playback

Pause lets you temporarily stop playback of the

CD.

1 Press 6 to turn pause on.

PAUSE appears in the display. Play of the cur-

rent track pauses.

2 Press 6 to turn pause off.

Play will resume at the same point that you

turned pause on.

Audio Adjustments

En 8

English Español Deutsch Français Italiano Nederlands

Introduction of audio

adjustments

1AUDIO display

Shows the audio adjustments status.

2LOUD indicator

Appears in the display when loudness is

turned on.

Press AUDIO to display the audio function

names.

Press AUDIO repeatedly to switch between the

following audio functions:

FADER (balance adjustment)—EQ (equalizer)—

LOUD (loudness)—FIE (front image

enhancer)—SLA (source level adjustment)

• When selecting the FM tuner as the source,

you cannot switch to SLA.

• To return to the display of each source, press

BAND.

Note

• If you do not operate the audio function within

about 30 seconds, the display is automatically

returned to the source display.

Using balance adjustment

You can select a fader/balance setting that pro-

vides an ideal listening environment in all occu-

pied seats.

1 Press AUDIO to select FADER.

Press AUDIO until FADER appears in the dis-

play.

• If the balance setting has been previously

adjusted, BAL will be displayed.

2 Press 5or ∞to adjust front/rear speaker

balance.

Each press of 5or ∞moves the front/rear

speaker balance towards the front or the rear.

•F15 –R15 is displayed as the front/rear

speaker balance moves from front to rear.

•0is the proper setting when only two speak-

ers are used.

3 Press 2or 3to adjust left/right speaker

balance.

When you press 2or 3, BAL: 0 is displayed.

Each press of 2or 3moves the left/right

speaker balance towards the left or the right.

•BAL:L9 – BAL:R9 is displayed as the left/right

speaker balance moves from left to right.

1 2

Using the equalizer

The equalizer lets you adjust the equalization to

match car interior acoustic characteristics as

desired.

Recalling equalizer curves

There are six stored equalizer curves which you

can easily recall at any time. Here is a list of the

equalizer curves:

Display Equalizer curve

SBASS Super bass

PWRFL Powerful

NTRL Natural

VOCAL Vocal

CSTM Custom

FLAT Flat

•CSTM is an adjusted equalizer curve that you

create.

• When FLAT is selected no supplement or

correction is made to the sound. This is useful

to check the effect of the equalizer curves by

switching alternatively between FLAT and a set

equalizer curve.

Press EQ to select the equalizer.

• If the equalizer has been previously set to an

equalizer curve other than PWRFL then the title

of that previously selected equalizer curve will

be displayed, such as SBASS, NTRL, VOCAL,

CSTM, or FLAT.

Adjusting equalizer curves

You can adjust the currently selected equalizer

curve setting as desired. Adjusted equalizer

curve settings are memorized in CSTM.

1 Press AUDIO to select the equalizer mode.

Press AUDIO until EQ appears in the display.

2 Select the band you want to adjust with

2/3.

L (low) —M (mid) —H (high)

3 Press 5or ∞to adjust the equalizer curve.

Each press of 5or ∞increases or decreases

the equalizer curve respectively.

•+6 ––6is displayed as the equalizer curve is

increased or decreased.

• The actual range of the adjustments are differ-

ent depending on which equalizer curve is

selected.

Note

• If you make adjustments when a curve other

than CSTM is selected, the newly adjusted

curve will replace the previous curve. Then a

new curve with CSTM appears on the display

while selecting the equalizer curve.

Adjusting loudness

Loudness compensates for deficiencies in the

low- and high-sound ranges at low volume.

1 Press AUDIO to select LOUD.

Press AUDIO until LOUD appears in the display.

Audio Adjustments

Andere Handbücher für DEH-1450

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Pioneer Autoempfänger Handbücher

Pioneer

Pioneer DEH-P4500R Bedienungsanleitung

Pioneer

Pioneer MVH-S110UI Bedienungsanleitung

Pioneer

Pioneer DEH-2700 Bedienungsanleitung

Pioneer

Pioneer DEH-S7200BHS Bedienungsanleitung

Pioneer

Pioneer Premier DEH-P960MP Bedienungsanleitung

Pioneer

Pioneer DEH-27MP Bedienungsanleitung

Pioneer

Pioneer FH-X70BT Bedienungsanleitung

Pioneer

Pioneer FH-X779BT Bedienungsanleitung

Pioneer

Pioneer Super Tuner IIID DEH-P5900IB Bedienungsanleitung

Pioneer

Pioneer DEH-P7700MP - In-Dash CD/MP3/WMA/WAV/iTunes AAC Car Stereo... Bedienungsanleitung

Pioneer

Pioneer DEH-P4850MP Bedienungsanleitung

Pioneer

Pioneer DEH-4900DAB Bedienungsanleitung

Pioneer

Pioneer DEH-4400BT Bedienungsanleitung

Pioneer

Pioneer Super Tuner IIID DEH-P6900UB Bedienungsanleitung

Pioneer

Pioneer DEH-8300SD Bedienungsanleitung

Pioneer

Pioneer DEH-1700R Bedienungsanleitung

Pioneer

Pioneer MEH-P6550 Bedienungsanleitung

Pioneer

Pioneer DEH-9350SD Bedienungsanleitung

Pioneer

Pioneer Service manual Bedienungsanleitung

Pioneer

Pioneer DEH-P2900MP Bedienungsanleitung

Pioneer

Pioneer KEH-P8010R Bedienungsanleitung

Pioneer

Pioneer AVH-X7700BT/XNUC Bedienungsanleitung

Pioneer

Pioneer KEH-P5200RDS Bedienungsanleitung

Pioneer

Pioneer KEH-P6005 Bedienungsanleitung

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

JVC

JVC KD-AHD69 Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung

Philips

Philips CEM5000 Bedienungsanleitung