Pioneer Elite SC-25 Gebrauchs- und Pflegehandbuch

HOME MEDIA GALLERY Firmware Update Instructions

For Models SC-25, SC-27 and SC-9540

Important

Do not turn off the Receiver, the PC being used for the update, or any network devices needed to access

the Internet or your network (such as a router) during the update process. Doing so may damage the

Receiver. Only Microsoft Windows and Internet Explorer have been tested with this procedure. Other

OS and browsers may not properly update the Receiver.

Please end all applications on the PC before you begin the steps below to update the Receiver’s firmware. Please

confirm the completion of the firmware update using the PC. (If you leave the GUI screen for over five minutes,

the screen saver will appear.) Once updated, the Network settings may be restored to the factory defaults (i.e.,

any customized settings may be lost).

Connecting to the Network and Internet Using the LAN Interface

Caution

Before making or changing any of the connections illustrated below, please switch off the power to the device(s)

involved and disconnect the power cord from the power outlet. Plugging in the devices to the power outlet should be

the final step. The illustration below shows model SC-27 on the left, however the connections for models SC-25 and

SC-9540 are the same except where noted.

Connect the LAN terminal on the Receiver to the LAN terminal on your router (with or without

the built-in DHCP server function) with a straight LAN cable CAT5 or higher.

Checking the Firmware

Use the Receiver’s remote control for the following three steps:

A. Press HOME MEDIA GALLERY button to select ‘Home Media Gallery’ as the input function.

B. Select ‘Setup’ and press ENTER to confirm your selection.

The Setup screen appears.

C. Select ‘Information’ and press ENTER to confirm your selection.

The Firmware Version for the Home Media Gallery is displayed.

TV Screen

D. On the PC, please go to Pioneer’s website to determine the latest firmware version available for the Receiver.

--If the firmware version displayed on the Receiver and displayed on Pioneer’s website are the same, it is

OT NECESSARY to update the Receiver. --If the firmware version displayed on the Receiver and

displayed on Pioneer’s website are different, it is NECESSARY to update the Receiver. Please proceed to

the next step.

Updating the Firmware of the Receiver

**Use the PC for Step 1, and use the Receiver remote control for Steps 2 to 7.**

1. Using the PC, download the latest firmware file from Pioneer's website (URL is listed in step D above) and

save it to a folder on the PC. Please make a note of the location of the downloaded file for Step 12.

2. Press the HOME MEDIA GALLERY button on the Receiver’s remote control to select ‘Home Media

Gallery’ as the input function.

3. Select ‘Setup’ and press the ENTER button to confirm your selection. The

Setup screen appears.

4. Select ‘Information’ and press ENTER button to confirm your selection.

The Firmware Version for the Home Media Gallery is displayed.

5. Check the network settings. Press the ↑/↓buttons to switch the display. Each

time you press ↑/↓, the display switches as follows.

6. Please write down the current firmware version of the Receiver AS WELL AS and the IP address of the

Receiver.

7. Press the top menu button to return to the top menu.

8. Open the PC’s web browser, input the IP address you noted in step 6 into the address

ar/field, and then press

Enter. The following should be displayed on the PC screen:

9. Click on the ‘Firmware Update’. The current firmware version is displayed on

the PC screen.

10. Click on the ‘OK’ button located next to the ‘Prepare for Firmware Update’.

11. Preparations for updating are performed. Follow the instructions on the screen, wait

ten or more seconds. --If the screen does not switch, click on the “click here”

on the PC screen.

The following image should now be displayed on the PC screen:

12. Click on the Browse button and open the folder that contains the firmware file you downloaded in step 1 and then

select the firmware file.

13. Click on the ‘Upload’ button. The confirmation screen prior to updating appears, and the name of the new

firmware file and other information are displayed.

14. Click on the ‘OK’ button. The firmware updating progress should be displayed on the PC screen. Wait until

Firmware upload status “100% completed” is displayed.

15. Click on the ‘OK’ button. The screen in step 8 reappears. --If the firmware version displayed here is the latest

version (compare it to firmware version from Step D above), then the firmware update was successful and is complete

-- If the firmware version displayed here is NOT the latest version (compare it to firmware version from Step D

above), then the firmware update was not successful. Please contact Pioneer Customer Call Center for further

instruction at 1-877-283-5901 during regular business hours (M-F, 9AM-5:30PM Eastern Time). --If the screen in

step 8 does not reappear, update the page by clicking on the Refresh button of the browser.

16. Switch off the Receiver. If the firmware update was successful and is completed, the Receiver is now ready

for use.

If you have questions, please contact Pioneer Customer Call Center for further instruction at 1-877-283-5901

during regular business hours (M-F, 9AM-5:30PM Eastern Time).

Andere Handbücher für Elite SC-25

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Pioneer Stereo-Receiver Handbücher

Pioneer

Pioneer VSX-1023-K Bedienungsanleitung

Pioneer

Pioneer DMH-ZF8550BT Bedienungsanleitung

Pioneer

Pioneer LX-880 Service-Handbuch

Pioneer

Pioneer AVH-3400NEX Bedienungsanleitung

Pioneer

Pioneer SPH-EVO62DAB Bedienungsanleitung

Pioneer

Pioneer AVH-G110DVD Bedienungsanleitung

Pioneer

Pioneer AVH-X5850BT Bedienungsanleitung

Pioneer

Pioneer XR-J1500C Bedienungsanleitung

Pioneer

Pioneer VSX-519V-K Bedienungsanleitung

Pioneer

Pioneer VSX-935 Bedienungsanleitung

Pioneer

Pioneer SX-700L Bedienungsanleitung

Pioneer

Pioneer AVH-Z7200DAB Bedienungsanleitung

Pioneer

Pioneer AVH-P6600DVD/UC Bedienungsanleitung

Pioneer

Pioneer SX-2700 Kurzanleitung

Pioneer

Pioneer VSX-535DAB Handbuch

Pioneer

Pioneer Elite SC-82 Bedienungsanleitung

Pioneer

Pioneer VSX-828-S Bedienungsanleitung

Pioneer

Pioneer SX-850 Bedienungsanleitung

Pioneer

Pioneer DMH-A4450BT Bedienungsanleitung

Pioneer

Pioneer SX-535 Bedienungsanleitung

Pioneer

Pioneer SX-255R Bedienungsanleitung

Pioneer

Pioneer SX-312R Bedienungsanleitung

Pioneer

Pioneer VSX-D906S Bedienungsanleitung

Pioneer

Pioneer VSA-LX805 Bedienungsanleitung

Beliebte Stereo-Receiver Handbücher anderer Marken

Marantz

Marantz CINEMA 70S Bedienungsanleitung

Kenwood

Kenwood KMDX92 Bedienungsanleitung

Yamaha

Yamaha RX-830 Bedienungsanleitung

Yamaha

Yamaha RX-750 Bedienungsanleitung

Denon

Denon AVR-1311 Bedienungsanleitung

Denon

Denon AVR-S760H Bedienungsanleitung

Denon

Denon AVR-X7200W Bedienungsanleitung

Sony

Sony XAV-1500 Bedienungsanleitung

Radio Shack

Radio Shack DX-399 Bedienungsanleitung

Sony

Sony STR-DE535 - Fm Stereo/fm-am Receiver Bedienungsanleitung

Yamaha

Yamaha MusicCast TSR-5B3D Bedienungsanleitung

Sony

Sony STR-DE335 - Fm Stereo/fm-am Receiver Bedienungsanleitung

Sony

Sony STR-DG500 - Multi Channel Av Receiver Bedienungsanleitung

Panasonic

Panasonic AJSD955B - DVCPRO50 STUDIO DECK Bedienungsanleitung

Sherwood

Sherwood S-2660CP Technisches Handbuch

Sony

Sony STR-K790 - Lifier Bedienungsanleitung

Denon

Denon DRA-697CI Bedienungsanleitung

SMART-AVI

SMART-AVI HDX-PRO Series Bedienungsanleitung