Pioneer VSX-LX304-B Bedienungsanleitung

Front Panel≫Rear Panel≫Remote≫

AV RECEIVER

Instruction

Manual

VSX-LX304

Table of contents ≫

Connections ≫

- Connecting Speakers ≫

Playback ≫

Setup ≫

Troubleshooting ≫

Appendix ≫

Supplementary Information ≫

Contents

Front Panel≫Rear Panel≫Remote≫

Contents

≫Connections

≫Playback

≫Setup

≫

Table of contents

What’s in the box 5

Additional Function (Firmware Update) 6

Update Information of the rmware 6

Operation of added new functions 6

Firmware Update Procedure 7

Part Names 10

Front Panel 10

Display 12

Rear Panel 13

Remote Controller 15

Connections

Connecting speakers 18

Speaker Installation 19

Speaker Connections and "Speaker Setup" Settings 37

Speaker combinations 50

Connecting the TV 51

To ARC TV 52

To Non-ARC TV 53

Connecting Playback Devices 54

Connecting an AV Component with HDMI Jack

Mounted 54

Connecting an Audio Component 55

Connecting a Video Camera, etc. 56

Connecting an AV Component in a Separate Room

(Multi-zone Connection) 57

Connecting a TV (ZONE 2) 57

Connecting a Pre-main Amplier (ZONE 2) 58

Connecting ZONE B 59

Connecting a Pre-main Amplier, etc. (ZONE B) 59

Connecting Antennas 60

Network Connection 61

Connecting External Control Devices 62

IR IN/OUT port 62

12V TRIGGER OUT jack 63

Connecting the Power Cord 64

Playback

AV Component Playback 66

Basic Operations 66

BLUETOOTH®Playback 67

Basic Operations 67

Internet Radio 68

Playing Back 68

Spotify 70

AirPlay®71

Playing Back on This Unit 71

Playing Back on multiple devices (AirPlay2) 72

3Front Panel≫Rear Panel≫Remote≫

Contents

≫Connections

≫Playback

≫Setup

≫

DTS Play-Fi®73

Playing Back 73

FlareConnectTM 74

Playing Back 74

USB Storage Device 75

Basic Operations 75

Device and Supported Format 77

Playing back les on a PC and NAS (Music Server) 78

Windows Media® Player settings 78

Playing Back 79

Supported Audio Formats 82

Play Queue 83

Initial Setup 83

Adding Play Queue Information 83

Sort and Delete 84

Playing Back 84

Amazon Music 85

Registering this unit with Amazon Music 85

Playing Amazon Music 85

Connecting the Sonos System for Playback 86

Necessary Equipment 86

How to Connect This Unit and Sonos Connect 86

Setting Up 86

Playing Sonos on This Unit 87

Listening To the AM/FM Radio 88

Tuning into a Radio Station 88

Presetting a Radio Station 90

Using RDS (European, Australian and Asian models) 92

Multi-zone 93

Playing Back (ZONE 2) 94

Playing Back (ZONE 3) 96

ZONE B Playback 97

Playing Back 97

Convenience functions 98

Using PERSONAL PRESET 98

Adjusting the tone 100

Sleep Timer 102

Listening Mode 103

Selecting a Listening mode 103

Speaker Layouts and Selectable Listening Modes 106

Listening Mode E󰀨ects 109

Input Formats and Selectable Listening Modes 113

Inputting Characters 119

4Front Panel≫Rear Panel≫Remote≫

Contents

≫Connections

≫Playback

≫Setup

≫

Setup

System Setup 120

Menu list 120

Menu operations 122

Input/Output Assign 123

Speaker 127

Audio Adjust 132

Source 134

Hardware 136

Multi Zone 144

Miscellaneous 145

Advanced MCACC 147

Menu operations 147

Full Auto MCACC 148

Manual MCACC 149

MCACC Data Check 151

Network/Bluetooth 152

Menu operations 152

Network 153

Bluetooth 155

AV Adjust 156

Menu operations 156

Web Setup 158

Menu operations 158

Initial Setup with Auto Start-up Wizard 159

Operations 159

Troubleshooting

When the unit is operating erratically 163

Troubleshooting 165

Appendix

Reducing the Power Consumption in Standby State 174

About HDMI 175

General Specications 177

5Front Panel≫Rear Panel≫Remote≫

Contents

≫Connections

≫Playback

≫Setup

≫

What’s in the box

1. Main unit (1)

2. Remote controller (RC-974R) (1), Batteries (AAA/R03) (2)

3. Speaker setup microphone (1)

• Used during Initial Setup.

4. Indoor FM antenna (1)

5. AM loop antenna (1)

6. Power cord (1)

• Quick Start Guide (1)

*This document is an online instruction manual. It is not included as an

accessory.

• Connect speakers with an impedance of 4 Ω to 16 Ω.

• The power cord must be connected only after all other connections are

completed.

• We will not accept any responsibility for damage arising from the connection

with equipment manufactured by other companies.

• Network services and content that can be used may no longer be available

if new functions are added by updating rmware or the service providers

terminate their services. Also, available services may di󰀨er depending on your

area.

• Details on the rmware update will be posted on our website and through

other means at a later date.

• Specications and appearance are subject to change without prior notice.

6Front Panel≫Rear Panel≫Remote≫

Contents

≫Connections

≫Playback

≫Setup

≫

Additional Function (Firmware Update)

This unit is equipped with a function to update the rmware via network or USB port when the rmware update is announced after purchase. This enables various

functions to be added and operations to be improved.

Depending on the manufacturing timing of the product, the rmware may be switched to the updated one. In such a case, new functions may be added from the start.

For how to conrm the latest rmware contents and the rmware version of your product, see the following section.

Update Information of the rmware

For the latest rmware contents and the rmware version, visit our company’s website. If the rmware version of your product di󰀨ers from the latest one, it is

recommended to update the rmware.

To conrm the rmware version of your product, press the button on the remote controller to display the Home screen, and refer to "System Setup" - "Miscellaneous"

- "Firmware Update" - "Version" ( p145).

Operation of added new functions

If functions are added or changed from contents described in the Instruction Manual, see the following reference.

Supplementary Information ≫

❏Firmware Update Procedure ( p7)

7Front Panel≫Rear Panel≫Remote≫

Contents

≫Connections

≫Playback

≫Setup

≫

Firmware Update Procedure

The update may take approx. 20 minutes to complete via network or via USB

port. Existing settings are guaranteed in either updating method.

When this unit is connected to the network, notications of rmware updates may

be displayed. To update the rmware, select "Update Now" with the cursors on

the remote controller, and press the ENTER button. The unit automatically enters

standby mode after "Completed!" is displayed, and the update is completed.

Disclaimer: The program and accompanying online documentation are furnished

to you for use at your own risk.

Our company will not be liable and you will have no remedy for damages for

any claim of any kind whatsoever concerning your use of the program or the

accompanying online documentation, regardless of legal theory, and whether

arising in tort or contract.

In no event will our company be liable to you or any third party for any special,

indirect, incidental, or consequential damages of any kind, including, but not

limited to, compensation, reimbursement or damages on account of the loss of

present or prospective prots, loss of data, or for any other reason whatsoever.

Updating the Firmware via Network

• While updating the rmware, do not do the following:

– Disconnecting and reconnecting cables, USB storage device, speaker

setup microphone or headphones, or performing operations on the unit

such as turning the power o󰀨

– Accessing this unit from a PC or smartphone using their applications

• Check that the unit is turned on, and the connection to the Internet is secured.

• Turn o󰀨 the controller components (PC etc.) connected to the network.

• Stop any playing Internet radio, USB storage device, or server content.

• If the multi-zone function is active, turn it o󰀨.

• If "HDMI CEC" is set to "On", set it to "O󰀨".

– Press to display the Home screen. Next, select "System Setup" -

"Hardware" - "HDMI", press ENTER, select "HDMI CEC" and select "O󰀨".

* The descriptions may di󰀨er from the actual on-screen displays, however, operations

and functions are the same.

Update

1. Press .

The Home screen is displayed on the TV screen.

2. Select "System Setup" - "Miscellaneous" - "Firmware Update" - "Update via

NET" with the cursors in order, then press ENTER.

• If "Firmware Update" is grayed out and cannot be selected, wait for a while

until it starts up.

• If there is no updatable rmware, "Update via NET" cannot be selected.

3. Press ENTER with "Update" selected, and start update.

• During the update, the TV screen may go black depending on the program

to be updated. In such a case, check the progress on the display of the

unit. The TV screen will remain black until the update is completed and the

power is turned on again.

• When "Completed!" is displayed, the update is complete.

4. Press STANDBY/ON on the main unit to turn the unit into standby mode.

The process is completed, and your rmware is updated to the latest version.

• Do not use on the remote controller.

8Front Panel≫Rear Panel≫Remote≫

Contents

≫Connections

≫Playback

≫Setup

≫

If an Error Message is Displayed

If an error occurs, "- Error!" is displayed on the display of the unit. (""

represents an alphanumeric character.) Refer to the following descriptions and

check.

Error Code

• -01, -10:

LAN cable not found. Connect the LAN cable properly.

• -02, -03, -04, -05, -06, -11, -13, -14, -16, -17, -18, -20,

-21:

Internet connection error. Check the following:

– Whether the router is turned on

– Whether this unit and the router are connected via the network

Unplug and plug the power cords of this unit and the router. This may solve

the problem. If you are still unable to connect to the Internet, the DNS server

or proxy server may be temporarily down. Check the server operation status

with your Internet service provider.

• Others:

After removing the power plug once, insert it to the outlet, and then start the

operation from the beginning.

Updating via USB

• While updating the rmware, do not do the following:

– Disconnecting and reconnecting cables, USB storage device, speaker

setup microphone or headphones, or performing operations on the unit

such as turning the power o󰀨

– Accessing this unit from a PC or smartphone using their applications

• Prepare a 256 MB or larger USB storage device. The format of USB storage

devices supports FAT16 or FAT32 le system format.

– Media inserted into a USB card reader may not be used for this function.

– USB storage devices equipped with the security function are not supported.

– USB hubs and USB devices equipped with the hub function are not

supported. Do not connect these devices to the unit.

• Delete any data stored on the USB storage device.

• Turn o󰀨 control devices (PC etc.) connected to the network.

• Stop an Internet radio, USB storage device, or server content being played.

• If the multi-zone function is active, turn it o󰀨.

• If "HDMI CEC" is set to "On", set it to "O󰀨".

– Press to display the Home screen. Next, select "System Setup" -

"Hardware" - "HDMI", press ENTER, select "HDMI CEC" and select "O󰀨".

* Depending on the USB storage device or its content, long time may be required

for loading, the content may not be loaded correctly, or power may not be supplied

correctly.

* Our company will not be liable whatsoever for any loss or damage of data, or storage

failure arising from the use of the USB storage device. Please note this in advance.

* The descriptions may di󰀨er from the actual on-screen displays, however, operations

and functions are the same.

Update

1. Connect the USB storage device to your PC.

2. Download the rmware le from our company's website to your PC and unzip.

Firmware les are named as below.

PIOAVR_R.zip

Unzip the le on your PC. The number of unzipped les and folders varies

depending on the model.

3. Copy all unzipped les and folders to the root folder of the USB storage

device.

• Make sure to copy the unzipped les.

4. Connect the USB storage device to the USB port of this unit.

• If an AC adapter is supplied with the USB storage device, connect the AC

adapter, and use it with a household outlet.

• If the USB storage device has been partitioned, each section will be treated

as an independent device.

5. Press .

The Home screen is displayed on the TV screen.

9Front Panel≫Rear Panel≫Remote≫

Contents

≫Connections

≫Playback

≫Setup

≫

6. Select "System Setup" - "Miscellaneous" - "Firmware Update" - "Update via

USB" with the cursors in order, then press ENTER.

• If "Firmware Update" is grayed out and cannot be selected, wait for a while

until it starts up.

• If there is no updatable rmware, "Update via USB" cannot be selected.

7. Press ENTER with "Update" selected, and start update.

• During the update, the TV screen may go black depending on the program

to be updated. In such a case, check the progress on the display of the

unit. The TV screen will remain black until the update is completed and the

power is turned on again.

• During the update, do not turn the power o󰀨, or disconnect or reconnect the

USB storage device.

• When "Completed!" is displayed, the update is complete.

8. Disconnect the USB storage device from the unit.

9. Press STANDBY/ON on the main unit to turn the unit into standby mode.

The process is completed, and your rmware is updated to the latest version.

• Do not use on the remote controller.

If an Error Message is Displayed

If an error occurs, "- Error!" is displayed on the display of the unit. (""

represents an alphanumeric character.) Refer to the following descriptions and

check.

Error Code

• -01, -10:

The USB storage device cannot be recognized. Check if the USB storage

device or USB cable is securely inserted to the USB port of the unit.

Connect the USB storage device to an external power source if it has its own

power supply.

• -05, -13, -20, -21:

The rmware le is not present in the root folder of the USB storage device, or

the rmware le is for another model. Retry from the download of the rmware

le.

• Others:

After removing the power plug once, insert it to the outlet, and then start the

operation from the beginning.

Contents

≫Connections

≫Playback

≫Setup

≫

Front Panel≫Rear Panel≫Remote≫

Part Names

Front Panel

❏For details, see ( p11)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Pioneer Stereo-Receiver Handbücher

Pioneer

Pioneer VSX-1020-K Bedienungsanleitung

Pioneer

Pioneer VSX-505S Bedienungsanleitung

Pioneer

Pioneer DMH-A4450BT Bedienungsanleitung

Pioneer

Pioneer SX-316-S Bedienungsanleitung

Pioneer

Pioneer VSX-918V-S Bedienungsanleitung

Pioneer

Pioneer HTP-2900 Bedienungsanleitung

Pioneer

Pioneer VSX-3300 Bedienungsanleitung

Pioneer

Pioneer VSX-4950S Bedienungsanleitung

Pioneer

Pioneer SX303R Bedienungsanleitung

Pioneer

Pioneer SPH-EVO93DAB Bedienungsanleitung

Pioneer

Pioneer DMH-AF555BT Bedienungsanleitung

Pioneer

Pioneer QX-949 Bedienungsanleitung

Pioneer

Pioneer QX-747A F Bedienungsanleitung

Pioneer

Pioneer VSX-82TXS Bedienungsanleitung

Pioneer

Pioneer SX-1250 Bedienungsanleitung

Pioneer

Pioneer SX-939 Bedienungsanleitung

Pioneer

Pioneer MVH-G215BT Bedienungsanleitung

Pioneer

Pioneer SX-850 Bedienungsanleitung

Pioneer

Pioneer AVH-295BT Bedienungsanleitung

Pioneer

Pioneer SX-3900 Bedienungsanleitung

Pioneer

Pioneer AVH-Z7200DAB Bedienungsanleitung

Pioneer

Pioneer AVH-2350DVD Bedienungsanleitung

Pioneer

Pioneer DIVX AVH-G219BT Bedienungsanleitung

Pioneer

Pioneer SPH-DA160DAB Bedienungsanleitung

Beliebte Stereo-Receiver Handbücher anderer Marken

Marantz

Marantz CINEMA 70S Bedienungsanleitung

Kenwood

Kenwood KMDX92 Bedienungsanleitung

Yamaha

Yamaha RX-830 Bedienungsanleitung

Yamaha

Yamaha RX-750 Bedienungsanleitung

Denon

Denon AVR-1311 Bedienungsanleitung

Denon

Denon AVR-S760H Bedienungsanleitung

Denon

Denon AVR-X7200W Bedienungsanleitung

Sony

Sony XAV-1500 Bedienungsanleitung

Radio Shack

Radio Shack DX-399 Bedienungsanleitung

Sony

Sony STR-DE535 - Fm Stereo/fm-am Receiver Bedienungsanleitung

Yamaha

Yamaha MusicCast TSR-5B3D Bedienungsanleitung

Sony

Sony STR-DE335 - Fm Stereo/fm-am Receiver Bedienungsanleitung

Sony

Sony STR-DG500 - Multi Channel Av Receiver Bedienungsanleitung

Panasonic

Panasonic AJSD955B - DVCPRO50 STUDIO DECK Bedienungsanleitung

Sherwood

Sherwood S-2660CP Technisches Handbuch

Sony

Sony STR-K790 - Lifier Bedienungsanleitung

Denon

Denon DRA-697CI Bedienungsanleitung

SMART-AVI

SMART-AVI HDX-PRO Series Bedienungsanleitung