Pitney Bowes DM Series Bedienungsanleitung
SDC876F Pitney Bowes DM Series LAN Connectivity Guide
Contents
Introduction
• About LAN Connection
• Is it secure?
• Products covered in this guide
• Information about Advanced set up
How to physically connect your system to the Network socket
Advanced IT Setup
File extensions and URLs that the network/firewall needs to allow
Ports and protocols needed by LAN Connection
Reference
• HowtocongureastaticIPaddress
• Howtocongureforaproxyserver
• Network administrator needs the MAC address
UK
<< Return to Contents
Click on any of the subjects in the contents list to jump
straight to that section.
SDC876F Pitney Bowes DM Series LAN Connectivity Guide
Introduction UK
<< Return to Contents
About LAN Connection
LANConnectionallowsyourmetertoconnecttotheinternetviayour
network(LAN)toprovideaconnectionthatisalwaysavailable.
Youwillobtainaquickandreliableconnectionwhenyourfranking
machineconnectstoPitneyBowesforservicessuchas;Postage
rell,SystemUpdates,ElectronicPostalInspectionandDataCentre
InformationExchange.
Is it secure?
Yes,thesystemhasbeenapprovedbyICSA,
acompanyspecialising in custom evaluation
andcerticationtestingservicesforinformation
technologyproducts.
You can download the full report from
www.icsalabs.com/vendor/pitney-bowes
Information About Advanced Setup
InmostcasessimplyconnectingyourLANdeviceasdescribedinthis
guidewillresultinareliableandsecureconnection.
However,ifyouexperiencedifcultieswhilefollowingtheprocessorhave
alreadyexperiencedconnectionissuesbeforebeingdirectedtothisguide,
please proceed to the Advanced IT Setup Information provided in this
document.
Please note:YoumayrequireassistancefromyourNetwork/IT
DepartmentAdministratortoproceedthroughtheAdvancedSetupstages.
IMPORTANT:Availabilityofproductsvariesbycountry.Inclusionofa
productinthisguidedoesnotguaranteeavailabilitywithinyourcountry.
Products covered in this guide
This guide covers use of LAN Connection on the following products:
DM220i series
(including the DM110i, DM160i and DM220i)
DM475, DM475M and DM450 series
DM300c and DM400c series
DM300M and DM400M series
SDC876F Pitney Bowes DM Series LAN Connectivity Guide
UK
<< Return to Contents
How to physically connect your system to the network socket
If you are performing an installation on a new machine, please now return to you Installation guide. If you are changing connection method on an existing
machine, please now check that your new connection is working by performing a balance inquiry. If your connection is successful your Account balance will
display. If you experience any issues with connection please proceed to Advanced IT Setup on the next pages. You may need to contact your Network/ IT
Department Administrator.
USB cable supplied
with network
adapter
Plug into USB port on
Mailing System
Network Adapter
Ethernet cable
Plug directly
into system
LAN socket.
Connect to your
router or network
socket
Connect to your
router or network
socket
DM110i/DM160i/DM220i series DM300c/DM400c and
DM300M/DM400M series
DM475/DM475M/DM450 series only
4.TurntheSystempowerbackon.
5.OncetheSystemstartsanddisplaystheMailRun/
Homescreen,theLED’sontheNetworkAdapter
should lightuporickerwithin15seconds.This
indicatesthereisaconnectiontothenetwork.
1.TurnoffpowertotheSystem.
2.PlugtheEthernetcableintoyourrouter
ornetworksocket.
3.Plugtheotherendofthecableintothe
LANsocketontherearofthesystem.
4.TurntheSystempowerbackon.
1.TurnoffpowertotheSystem.
2.PlugtheEthernetcableintoyourrouterornetwork
socket.
3.AttachtheNetworkAdaptertotheEthernetcableand
thenplugtheNetworkAdapterintooneoftheUSB
PortsontheMailingSystemusingtheshortUSBcable
thatcomeswiththeAdapter.
Please note- Whether your system has an
on/o switch is dependant on model.
SDC876F Pitney Bowes DM Series LAN Connectivity Guide
Advanced IT Setup UK
<< Return to Contents
If you have experienced issues in connecting via LAN, the following
information explains the Advanced Setup Procedure.
Network configuration
You may need the help of your Network/IT Administrator to complete
the information below.
Thischecklistensuresthatyournetworksettingshavebeenmadeand,
wherenecessary,youhaveanoteofthesettingstoallowtheMailing
Systemtobecongured.
Howareyouconnectingtoyournetwork?(Tickboxasappropriate)
Network connection point (must be within 5 metres of the franking
machine)
NetworkconnectionviaWiFiConnectivityDevice
(thisisachargeableoptionobtainablefromPitneyBowes.Forfurtherdetails,goto
http://europe.pitneybowes-support.com and enter code 10959).
HowistheIPaddressbeingallocatedtoyourMailingSystem?(Check box
as appropriate)
Dynamically
Statically
ForstaticIPaddresses,youwillneedthefollowinginformation:
IP address . . .
Subnet mask . . .
Defaultgateway . . .
Istheconnectionusingaproxyserver?(Check box as appropriate)
Proxy setup is not available for DM300c/400c/475. Please contact your system supplier.
No
Yes
Foraproxyserver,youwillneedthefollowinginformation:
HTTPproxyURL(address)
HTTPproxyport
HTTPproxyusername
HTTPproxypassword
HTTPSproxyURL(address)
HTTPSproxyport
HTTPSproxyusername
HTTPSproxypassword
Ports to this IP Address are open for
80 (HTTP)
443 (HTTPS)
53 (DNS lookup)
20/21(FTP) Note- DM300c/400c/475productsonly.
SDC876F Pitney Bowes DM Series LAN Connectivity Guide
UK
<< Return to Contents
File extensions and URLs that the network/
firewall needs to allow
Ports and protocols needed by LAN
Connection
LANConnectionusesthefollowingleextensionsthatmustbeallowed
throughyournetworkandrewall:
LAN Connection uses the following ports and protocols that must be allowed
throughyournetworkandrewall:
The following pages will explain how to set up a static IP address, congure PROXY settings or obtain the MAC address if required.
Note:Ifyourrewallhasrestrictions,pleaseallowaccesstopb.com.
Type Extension
DEC .dcz
EMD .zmd
Graphics .bin
Rate Manager .rmz
CCD .bin
Snippet File .arc
Type Protocol Port Function
DNS UDP 53 Postage Refill and Web Services
HTTP TCP 80 Postage Refill and Web Services
HTTPS TCP 443
Postage Refill, Software and Rates
Updates, Graphic Downloads
FTP FTP 20/21
Software & Rates Updates,
Graphic downloads. Note- Firewall
must allow active FTP.
SDC876F Pitney Bowes DM Series LAN Connectivity Guide
UK
<< Return to Contents
8. Select IP, then press Ctocleartheexistingentry.KeyinyourstaticIP
address.PressEnter or Accepttoconrmthenewsetting.
NOTE:KeyinthecompleteIPaddress,includingthedecimalpoints
separatingtheIPaddressparts.If one or more sections contain less
than3digits,usezerostoll.e.g.192.168.1.25shouldbeenteredas
192.168.001.025.
9. SelectSubnet Mask/Subnet, then, press Ctocleartheexistingentry.
KeyinyoursubnetmasksettingsinthesamewayastheIPaddress.
Press Enter or Accept toconrm.
10.SelectDefault Gateway/ Gateway, then, press Ctocleartheexisting
1. PressOptions.
2. Press Page Downtwice.
3. Select Connect - Data Centre.
4. Select LAN Settings.
5. SelectGet IP.
6. SelectManually.
1. PressOptions/Menu.
2. Press Page Downtwice.
3. Select Data Centre Options.
4. Press Page Down.
5. Select Network Settings.
6. SelectGet IP.
7. SelectSpecify Address Manually.
Reference - How to configure a static IP address
entry.KeyinyourdefaultgatewayinthesamewayastheIPaddress
above.PressEnter or Accepttoconrm.
11.Ifrequested,pressEnteragaintoconrmthesettings.
12.PresstheHome keytoexitthesetupmenu.
7. Select IP Address/IP Addr.KeyinyourstaticIPaddress.
Press Enter or Accept toconrmthenewsetting.
NOTE:KeyinthecompleteIPaddress,includingthedecimal
pointsseparatingtheIPaddressparts.Ifoneormoresections
containlessthan3digits,usezerostoll.e.g.192.168.1.25
shouldbeenteredas192.168.001.025.
8. SelectSubnet Mask/Subnet. Keyinyoursubnetmask
settingsinthesamewayastheIPaddress.Press Enter or
Accepttoconrm.
9. SelectDefault Gateway/Gateway.Keyinyourdefaultgateway
inthesamewayastheIPaddressabove.PressEnter or
Accept toconrm.
10.Ifrequested,pressEnter againtoconrmthesettings.
11.Pressthe Home keytoexitthesetupmenu.
DM110i/DM160i/
DM220i series
DM300c/
DM400c
and DM300M/
DM400M
series
DM475/
DM475M/
DM450 series
only
SDC876F Pitney Bowes DM Series LAN Connectivity Guide
UK
<< Return to Contents
1. Press Options.
2. PressPage Downtwice.
3. SelectConnect - Data Centre.
4. SelectLAN Settings.
5. PressPage Down.
6. SelectProxy.
7. EntertheHTTPandHTTPSsettingsrequiredtoaccessyour
proxyserver.Theseinclude:
•theURL(address)
• the port used
• the login username
• the login password
8.Whencomplete,pressthe Home keytoleavethesetupmenu.
1.PressOptions/Menu.
2.PressPage Down twice.
3.SelectData Centre Options.
4.PressPage Down.
5.SelectNetwork Settings.
6.PressPage Down.
7.SelectProxy.
8.EntertheHTTPandHTTPSsettingsrequiredtoaccessyour
proxyserver.Theseinclude:
•theURL(address)
• the port used
• the login username
• the login password
9.Whencomplete,pressthe Homekeytoleavethesetupmenu.
Reference - How to configure for a proxy server
Note:Featurenotavailableinallmarkets.Pleasecheckwithyoursupplierfor
availability.
DM110i/DM160i/
DM220i series
DM300M/
DM400M
DM475M
SDC876F Pitney Bowes DM Series LAN Connectivity Guide
UK
<< Return to Contents
Reference - Network administrator needs MAC address
1. PressOptions / Menu
2. Press Page Downtwice.
3. Select Data Centre Options.
4. Press Page Down.
5. Select Network Settings.
6. Thenetworkadapter’sMACaddresswillbedisplayed.Takea
noteofthisforyourNetworkAdministrator.
7. PressHometoreturntotheHomeScreen.
1. PressOptions.
2. Press Page Down twice.
3. Select Connect - Data Centre.
4. Select LAN Settings.
5. Press Page Down.
6. Thenetworkadapter’sMACaddresswillbedisplayed.Takea
noteofthisforyourNetworkAdministrator.
7. PressHometoreturntotheHomeScreen.
DM110i/DM160i/
DM220i series
DM300c/
DM400c
and DM300M/
DM400M
series
DM475/
DM475M/
DM450 series
only
SDC876F Guide sur la connexion des systèmes Séries DM Pitney Bowes à un réseau local
Contenu
Introduction
• Àproposdelaconnexionàunréseaulocal
• Est-ilsécurisé?
• Les produits couverts dans ce guide
• Informationàproposdelacongurationavancée
Comment connecter physiquement votre système
d'aranchissement à la prise réseau
Configuration informatique (IT) avancée
Les extensions de fichiers et qui doivent être autorisées par le
pare-feu/réseau
Les Ports et protocoles requis pour une connexion LAN
Références
• CommentcongureruneadresseIPstatique
• Commentcongurerpourunserveurproxy
• L'Administrateurréseauabesoindel'adresseMAC
FR
<< Retour à Contenu
Cliquez sur un sujet quelconque du "Contenu" pour y
accéder directement.
Andere Handbücher für DM Series
3
Dieses Handbuch passt für folgende Modelle
11
Inhaltsverzeichnis
Sprachen:
Andere Pitney Bowes Postausrüstung Handbücher
Pitney Bowes
Pitney Bowes dm60 series Technisches Handbuch
Pitney Bowes
Pitney Bowes DM300c series Technisches Handbuch
Pitney Bowes
Pitney Bowes POSTPERFECT B702 Einrichtungshandbuch
Pitney Bowes
Pitney Bowes DM110i Series Technisches Handbuch
Pitney Bowes
Pitney Bowes Small Office Series Mailstation 2 Bedienungsanleitung
Pitney Bowes
Pitney Bowes F612 Bedienungsanleitung
Pitney Bowes
Pitney Bowes DL400 Handbuch
Pitney Bowes
Pitney Bowes 1215 Bedienungsanleitung
Pitney Bowes
Pitney Bowes SendPro Bedienungsanleitung
Pitney Bowes
Pitney Bowes DM500 Gebrauchs- und Pflegehandbuch
Pitney Bowes
Pitney Bowes DM100 Series Bedienungsanleitung
Pitney Bowes
Pitney Bowes SendPro C series Handbuch
Pitney Bowes
Pitney Bowes DM100 Series Technisches Handbuch
Pitney Bowes
Pitney Bowes DM125 Bedienungsanleitung
Pitney Bowes
Pitney Bowes PCN 9H00 Handbuch
Pitney Bowes
Pitney Bowes PitneyShip Cube AX00 Bedienungsanleitung
Pitney Bowes
Pitney Bowes dm300m series Technisches Handbuch
Pitney Bowes
Pitney Bowes DM300 Bedienungsanleitung
Pitney Bowes
Pitney Bowes SendPro 1E42 Bedienungsanleitung
Pitney Bowes
Pitney Bowes SendPro C Handbuch
